Vizvera for Samsung Fold 5/4 Screen Protector, [2 +2 Pcs Inside and Front Screen Protector] With Accessories, Flexible Film HD Transparent High Clear Bubble Free for z Fold 5/4 -Clear

When my Z Fold 5's inner screen bubbled up, I contacted Samsung and had a big falling out! They wanted me to send in my phone and wait anything between 11 days up to a month! They also said that they would do a factory reset so I had to reinstall everything. No chance! I ordered one of these screens. Everything you need is in the box! The video on Amazon explains very well how to put it on. It took less than 10 minutes. If I can do it, everybody can! The trick is not to bend too much and not to apply too much pressure because it can stretch ans get streaky. After putting it on, I applied a little bit gentle heat with the hair dryer. I think it helped too. The screens are very smooth and the phone looks brand new again! I recommend it. Try it. There are two sets of screens in the box at the price of 2 beers. Well worth it

Screen protector was easy to install thanks to the included guide which allowed me to apply the protector straight and centralised. Just as clear as the factory fitted protecter fingerprints and smudges are not visible when screen is on and are easily removable with a microfiber cloth. The screen protector does not impact the functionality of the screen folding, facial recognition or touchscreen. Outer screen protector aligns perfectly for a flipsuit case.

It seems like a good cover for screen and good quality, but unfortunatly even following the guide it seems to have a struggle getting rid of air bubbles and I followed installation guide to the instructions manual and did it all very slowly and carefully, the first screen protector I installed unfortunatly didn't install at all well because I didn't realise that there was a cover on the top part of screen stopping it from sticking but wasn't present on bottom half so bottom half went on without issues but I tried removing plastic cover on top half and it completely screwed up the first installation, so I had to use the second pack but I managed to install the second screen easier then first instillation knowing that it had a plastic cover underneath, in my opinion it didn't need the plastic cover as it would of installed perfectly without it due to the plastic tab fitting into the USB slot of the phone which is a godsend because there is two tabs that are cut out and you just fit screen onto the two tabs and it lines up on screen, it's just the cover underneath the top half of the screen that's the issue for me, so I lost one screen protector and managed to install it perfectly on second except for the air bubbles that are stuck inside it even though I used all the tools provided and cleaning wipes ect. I will admit though this kit, It's better then any of the other screen protectors I have used or experienced in the past though, just hope it holds up well with prolonged usage, wet weather and movements. It's unfortunate that the one screen protector was lost due to a bungled first install. I wished that the instructions detailed that there was a cover under the one half of the screen that stops it from sticking. But on the whole I am impressed with the install. The plastic bracket that fits in USB slot is a godsend...

Like many, after 18 months of use, my Fold5 factor-fitted screen protector was starting to peel down the middle, so it was time to do something about it before the inner screen completely failed. As I live nowhere near a Galaxy Store for my free replacement, I needed to source the next best thing, so gave this product a try. I applied this a couple of weeks ago but wanted to hold off before I could judge how pleased I was was the item... Firstly, I wasn't impressed the included guide-frame (which fit snuggly) didn't have the same pin alignment as the included screen protectors! This meant I had to do things manually which kind of defeated the object in opting for this product in the hope of getting things aligned 100% correctly. In reality I was probably about 1mm shy of perfection with a slightly notable gap between screen protector and bezzle on 1 side - I'll live with it, at least it's straight. The application process itself was fine, however there were a dozen or so bubbles that would not shift afterwards The temptation is to rip the screen protector off and try again with the second one, but DON'T! I closed my phone, went to bed and found the bubble situation to be much, much better in the morning. The remaining bubbles I was able to tease out with my S-pen leaving me with a flawless finish. However, when I say "flawless", what I mean is I can still see vertical lines every few millimetres in certain lights. I assume this was due to my technique when using the application tool to smoothly apply the screen protector as I was doing a bit of a backwards and forwards movement in the hope of this resulting in less bubbles. So my advice is to make 1 smooth motion with the application tool which may result in less of this effect? 2 weeks on and the screen protector is holding nicely. I haven't noticed any micro-scratching which I'd say the factory-fitted screen prorector is more susceptible to. I also believe in healing properties of this screen protector as overtime I can see less of an impact of where I needed to tease out the remaining bubbles with my S-pen. If you look closely when wiping with a microfiber under a bright light, you can even see tiny lines appearing across the screen caused by tiny specs of dust - you can then see these lines "heal" seconds after leaving no micro-scratches at all. So durability looks pretty good to me. So overall I'd say this is adequate. The guide frame however was a waste of time and I can live with the slight vertical line issue as I have to really look for it under certain bright reflections. Other than that, the finish is fine.

Bought & so far so good went on easy & now all bubbles have gone and cover has not cracked on fold line like previous order by different manufacturer. There were no instructions with it, but sussed it out as I have done these covers before

Purchased for z flip 5, was a little unsure as it ment peeling off the current screen protector that Samsung provided. the kit has everything you need and it all works exceptionally good. I have fitted the main screen protector and using the template was a breeze to fit no issues at all, the YouTube video guide is really helpful. Could do with being a little slower but it gets to the point just pause and rewind until you understand. Fits like a glove, no bubbles or anything and the screen quality feels really really good better than the original. I would 100% recommend buying this if you have a z flip 5 it's perfect. Added bonus you get 2 for the front and 2 for the back including enough screen wipes etc to do the job. Great product

I needed a replacement screen cover as the Samsung one had started to peel down the fold. I was abit optimistic about replacing it, I wish I'd of done it sooner. This screen cover is a great replacement and fits absolutely perfect. The guide really helps and made the installation effortless.

This screen protector allows for the actual vibrant screen colors. However, the large screen cover gave me hard time to install. Getting stuck at the peel off, towards the last stage of the process. The sticker for dust removing and wipes are very small and hard to work with. Not as shown in the video. Minor issues with the touch screen were noticed as well. Nonetheless, much better for what I've tried before. Definitely good money for value.