Diff Drop for 07-22 Tundra 4WD, KSP CNC Machined T6 Aircraft Billet Aluminum Differential Drop kit with skid plate drop spacer for Tundra 2007-2022 4WD

The installation was pretty easy, no real instructions, but it's pretty obvious though. However, while it came with two bolts that were longer to allow the skid plate to reach after the spacers were put in. But, it needs two more longer bolts for the back skid plate. It isn't a deal breaker, but it was kinda annoying to have to go get one. You also need two more spacers, or, 4 larger nuts to go over the bolts to make a spacer. I wish I had pictures, but didn't think about it until I was finished with the installation.

I installed this drop kit in less than 10 minutes22mm socket19mm wrench for old hardwareThen will need22mm socket and7/8 wrench to installThis kit cost only $20 and it’ll save you $$$ by putting less stress in front differential of Tacoma 4x4

Good product, the package will come with diff drop spacers, skid plate spacers, long bolts and nuts. However it will need the following.You will need longer bolts and washers for the rear part of the differential skid plate. You can use the stock bolts but the skid plate will hit against the differential.You will also need longer bolts and washers for the back of the oil pan skid plate, because since adding the 1 inch spacer for the differential, it created a gap for the rear of the oil pan skid plate.I'll have to double check but I think the bolt threads for this is M8x1.25. What ever the stock bolts are, add either 1/2 to 1 inch of total length and add washers for spacing and get it at any hardware store.Update: I bought M8x1.25 x 40mm bolts for the rear oil pan skid plates and used a large nut as a spacer. The nut doesn't need to thread to the bolt. The rear of the diff skid plate i used M8x1.25 x 30mm plus washers.

Almost perfect it’s bolted on good and easy to install but the bolts where a little short for a 5th gen 4Runner they still work but they are a little short

Era lo que pedí yego en el tiempo que esperaba

Shop installed this with my lift, no vibration with this kit!

It fit perfectly. I will recommend

I tried to return this, but I guess you only get 30 days wasn’t able to use it because I watched some videos and did some measurements and it only drops the CV axle a quarter inch rather than an inch and you’re not able to use a skid plate unless you modify it Because it sticks down too far and if you don’t use a skid plate, it sticks down farther and gets caught if you’re driving for wheel, so I’m stuck with it couldn’t return it and not gonna use it