JETech Screen Protector for Samsung Galaxy Tab S9 11-Inch and Galaxy Tab S10 Lite / S10 FE / S9 FE 10.9-Inch, with Easy Installation Frame, Tempered Glass Film, HD Clear, 2-Pack

The JETech Screen Protector is a fantastic accessory for my Samsung Galaxy Tab. The installation was simple and bubble-free, and it fit perfectly, covering the screen edge to edge without interfering with the touch sensitivity. I’m impressed with the clarity and smooth feel — it doesn’t affect the display quality or responsiveness, and it’s very resistant to scratches and daily wear. It also helps reduce fingerprints and smudges, keeping the screen looking clean for longer. Overall, it’s a high-quality, reliable screen protector that gives peace of mind while maintaining the tablet’s sleek look and responsive touchscreen. Highly recommended for anyone wanting extra protection without compromising performance.

🛡️ ETech Tempered Glass Screen Protector – Full Review This protector is designed specifically for the Samsung Galaxy Tab A9 Plus 11" (2023)—models SM-X210 / SM-X216 / SM-X218. It’s made from 9H hardness tempered glass, offering scratch resistance, impact protection, and HD clarity. The kit includes two protectors, an easy-installation frame, and cleaning accessories for a bubble-free setup. It’s case-friendly, meaning it leaves a slight margin around the edges to avoid lifting when paired with rugged or folio cases. The surface is coated with oleophobic and hydrophobic layers, helping reduce fingerprints and smudges. ✅ Pros 9H tempered glass—resists scratches, drops, and pressure HD clarity—preserves screen brightness and sharpness Easy-install frame—aligns perfectly, no bubbles Oleophobic coating—reduces fingerprints and oil Case-friendly fit—compatible with most protective cases 2-pack—backup or shared use Affordable—typically around £11.99 ❌ Cons No privacy filter—screen visible from all angles Slight touch sensitivity drop—common with thick glass Not matte—glare may persist in bright light Requires careful alignment—frame helps, but still manual 🧠 Personal Verdict This protector’s proper kit for site use, travel, or gear-heavy environments. I’ve seen it used for field documentation, stylus work, and rugged setups, and it holds up—clear, tough, and no faff. The install frame is a win for clean alignment, and the 2-pack adds value. For under £12, it’s a smart grab for anyone who wants solid screen protection with no nonsense.

Only reason this gets 4 stars is because I haven't used it long enough to get 5 😂. JETech have always produced quality screens and the s9+ models are no different. The s pen works smoothly through the protector without any change to settings, and setting up is always a breeze.

Update - a year on, with a mischievous Sprocker pup on the loose, plus a good few knocks whilst working, it appears that all that's suffered is the screen protector. Whilst I doubt it "protected" the screen from physical impact, it certainly did take a few deep scratches. Time to try and remove it and replace it. No idea how I'll get it off! Still highly recommended. Ahhh, screen protectors. I've never really bothered with them since my first smartphone. Horrible, draggy, gummy things. Hated them. Guess that was the early days though. I recently bought a Tab S9 Ultra, and this screen protector looked neat and unobtrusive. Fitting did look like a absolute pain though, especially over such a massive screen. So, first of all, I didn't use the included screen wet wipe. I just used isopropanol and kitchen towel to thoroughly clean the screen. I then used the included sticky strip to get rid of any physical dirt or debris on the screen, which is apparently absolutely vital. You can see in my photos that my puppy dog was *very* involved in this process, and the sticky pad lifted a good few hairs off the screen following the isopropanol wipe. The came the frame. Fitted nicely after snapping the corners in well. No idea how someone mangled their tablet with such a light wee frame... Applying the glass was dead easy. Fitted right into the frame, and fitted onto the tablet perfectly with no effort. Look at the photo around the camera lenses to see the accuracy of the frame fitment. The frame also came off with no effort at all - I'd have had to do it with a hammer alone to cause any damage... There were huge bubbles. I worked them out using the very soft "squeegee" supplied - first from the inside out, then got rid of the bubbles at the side which seemed to suck the others making them easy to eliminate. It took me ten minutes in all. It's a flawless fit, with no bubbles or other imperfections. The touchscreen works as it did before, and, crucially, feels just as it did before. So, for all those bad reviews out there, maybe I got a better batch than you did. Maybe, however, I did a better job at being very clean when bonding glass to glass, understanding that absolutely any imperfection will result in abject failure. It took me ten minutes and very little effort to do. It doesn't change the touchscreen experience. It just works. Enough said.

I use these in conjunction with an outer case screen protector - my kids use the tablet a lot and it gets its abuse! Yet this hasn't cracked. This went on easy with a little bubble removal as to be expected but wasn't hideous. It has good instruction and an installation template so you can't really go wrong. Nice and clear on the screen and doesn't interfere with the touch screen (even with another screen on top). Ignore reviews that say "oh i dropped it and it broke" yes....it will....but if it did (not that mine has) I am confident underneath the screen would be fine thus doing its sole job!

This took me around 5 minutes to install and the process was very easy with the guide. I found that the guide wasn't perfect and I was probably 1mm misaligned right to left, and though the instructions said to simply apply force i wasn't able to perfectly centre it. However, that didn't matter because the protector covers my whole screen, and my case covers the edges so you can't actually tell it's not perfectly centre. Most air bubbles were easily expelled with the included squeezer. One air bubble was stubborn, and I found a tip to use a hair dryer (carefully) and this worked within about two minutes. The main reason for getting this was my infant son had been playing with the tablet and caused a number of scratches. I was hoping that a screen protector would make the scratches less visible, and it has achieved this successfully. They're still there if you know where they are and to look for them, but certainly not a bother anymore. Overall I would rate the screen protector. I might consider looking into some oleophobic coating because it does pick up some finger prints.

This worked very well and was easy to apply but on my first attempt I was left with a few bubbles which I could not remove with the smoother tool. What I did was, using my fingernail, I gently lifted the corner of the protective sheet until it lifted off the area with the bubbles and then let it drop back down again. This got rid of the bubbles. I had to do this twice on one area but it worked fine leaving the screen perfect. The gloss effect of the protector screen rather negates the anti-glare finish on my Samsung S10+ but I think I'll adjust to it.

easy to fit and hopefully will do the job