SUNPIE Motorcycle 7 Inch Head light Black Compatible with H_arley Road King, Compatible with Road/Electra/Street Glide with 4-1/2 Fog Lights Mounting Bracket

I received these very fast and exactly as described. All of the lights were very tightly packed in styrofoam. Install is a breeze but be aware on the passing lamps as you can clip them in backwards and then they won’t work so check them before you put the light back together. I managed to clip both of them backwards and had to take both of them apart. The only complaint I have about these is on the mounting ring itself. It fits great and bolts right up but the tab for the headlight ring had a hole that was too big for the factory screw, It just stripped out right away. Luckily I had a screw from a speaker upgrade laying around that was just a little bit bigger.. I had to cut that down and use it instead. They definitely added some youth to my geezer glide. I can’t say anything about shake or performance for a few months until I can get out on the road with these but they are much brighter than the halogens and look great. Very happy with my purchase and I have no problem with the one modification I had to make. If I could make one suggestion to the manufacturer of this.. after you take out the factory bucket for the headlight you just clip the new headlight into the old wiring and then it’s wide open into the fairing. No rubber for weather or moisture. I wrapped the connection with electrical tape but I could still see water could possibly get to it. Some sort of rubber backing or enclosure for the connection of the new headlight would be a very good addition.

Fast shipping, easy install good quality

So far so good

The lights are great. They look identical to the ones sold by Harley Davidson, at a fraction the cost. The headlight was simple to replace, just plug and install. The spot light wires had to be cut and connected with stake on connectors matching my bikes wiring. No problem. I have a 2002 Harley Ultra Classic. The lights really improve the look of the bike, and the illumination is doubled. The only problem I had was, one of the spot lights has something loose inside, which rattles a little when on rough road. I noticed this when installing the lights and contacted Sunpie about the rattling and my concern for light failure at some point. They requested a picture of the light, for some unknown reason, as I assured them the rattle could not seen in a picture. I sent several pictures anyway, and was then contacted by Sunpie, saying they would be mailing out a replacement spotlight. That was several weeks ago and I have not received a light yet at this time. I was hoping to have the replacement before completing this review, but I am now having doubts that it will arrive. Other than the loose component in the one spotlight, I love the lights and would highly recommend them. I feel certain that this is a highly unusual condition, and these lights are a great value for the price.

I normally don't leave reviews, but these lights were well worth the money. I can actually see the road at nights now :P Thanks

So I felt a little apprehensive about getting this from Amazon for my 2007 Harley Street Glide, being that it's Made in China. I must say I am 5star pleased that it fit perfectly, and works!!! As you can see by the video and picture that it sits like it should, it bolted right in. And it is a Plug and Play install. Only thing that can be an issue that some may struggle with fitment is the fact that the install instructions are very vague. Even the video you can pull up they recommended is extremely vague. It took a little figuring out but on my bike, I had to remove the entire stock headlight base, and bracket and headlight. The instructions said nothing about removing the stock base and bracket. No big deal, just took a little time to put 2 and 2 together. LOL. That being said, I did not have any problems getting this installed. I even was able to use my original outer chrome bezel and my Willie G chrome visor. Looks great. Now when the sun goes down I'm going to adjust the headlight for proper illumination. Thanks Sunpie.

Lights work as they should and are bright

For the price these lights will light up the road nicely! Not difficult at all for any diy'r. Everything you need was included for my 99' E-glide. I've bought this item for two bikes (99' & 06' E-Flides) and had the same pleasant EXPIERENCE with both purchases.

Just installed in my 07 Electra Glide Classic. Look great, quick install. Removed the ring the light came with and used rhe stock ring. Have not had on the highway yet as it's winter here in Northern Canada, but judging by past Sunpie lights I have purchased, they will be plug and play , and very bright. Repeat customer

Needed to replace my burned headlight bulb and decided it was time to switch to LED. Found this set on Amazon at a fraction of what HD is asking so placed the order. They arrived on time and ,as advertized ,were a snap to install with a screwdriver as the only tool needed. New lights are exceptionally bright and white, unlike the yellow glow produced by the original factory lights. Much easier for other drivers to see me now and while I don't do much night driving with these lights would be comfortable doing so. Recommend to anyone looking to upgrade to LED,

Although I can't comment on durability/longevity, I will at this time say" Outstanding" !! Direct plug n play on my 2011 FLHTC, and by far much BRIGHTER than stock lighting. I did not require the extra head lamp wire adapter, but it came as part of the package I purchased with the head lamp mounting ring,(which I probably did not need either) but it literally fell right into place.(holes lined right up)There were no instructions, but you don't need any,It is that simple !! I was 30 minutes max installing all 3 lights. My sole purpose for purchasing these lights was because I want to be better seen day or night, and I think that the brighter the lights ,LED lights will definitely will help. And I could not pass up the pricing. I am recommending these lights to my riding buddies. As a side note... the mounting ring comes already attached to the new headlamp , Easy peasy !!!!!!

Inexpensive upgrade to modernize the appearance of a 20yr-old Harley. The mounting ring took a bit of persuasion. Had to bend the unit's retaining screw tab to align with the bezel and wrap with foam to stop a small rattle. Easy enough and the final appearance is very good. I need all 3 front lamps on to light the road properly. The kit came with 3-4 pigtails to connect to different bikes. My FLHR was a straight plug-and-play. IMHO the LED low-beam puts about 80% of the light of the stock 7 inch sealed beam. The twin passing lamps fit easily in the stock housings and with all 3 lamps lit, the result is excellent!. Hope these last as long as the originals.

The lights themselves are great. The supplied mounting ring was so badly stamped and distorted that the headlamp would wobble and rock in the mount. The ring was out of round so bad the headlamp would not seat. I had to modify my stock headlamp bucket to make it work.