Leviton 15A SmartlockPro Self-Test GFCI Combination with Type A & Type-C USB in-Wall, USB Charger for Smartphones and Tablets, GUAC1-W

I installed this myself. It was very easy. Seems to be keeping the heater going without issue, so I'd recommend it

This GFCI combo with Type A and Type C USB is super convenient keeps my devices charged while protecting against ground faults. Easy to install and works reliably. A great modern upgrade for any kitchen or bathroom!

Had no issues with this outlet. Used both 15 and 20 amp versions, no usb, no child proofing. Child proofing is a pita to use. Like the fact that there is an indicator light - it's a must now. Test/reset buttons are not colored but then i never remembered which was which in a colored version. I just push whatever until it trips and light goes out. I hate those where light changes color. This one just goes out. It has terminals where you put the wire in and tighten the bolt. No need to make a loop - super fast and secure. Note that gfcis do go bad over time outdoors, this is expected. If concerned, use a gfci breaker indoors. 15a version is cheaper than at hd, 20a costs the same.

I removed a competitor's outlet that did not work, installed this outlet and it works fine. The price is good and I am pleased with the product.

good product as described and delivery was onetime and hassle free

So Far... Worked like it was supposed to. Easy to install and was perfect to add a layer of protection to my ungrounded circuit in an older home. Night light is just a bonus.

Initially had the wiring backwards, were connected the line wires to the load terminals, and the load wires to the line terminals. Didn’t work. Watching the video helped to reverse the wires, then it worked like a charm. The most challenging part is determining the two white wires, which of them is the load and which is the line. One of the black wires is the hot/line wire, it’s easy to test that with a voltage tester, and the other black is going to be the load wire. One black wire is the hot wire, one black wire is the load wire. There also two white wires. One of them is the load wire and the other one is the line wire that is coming from the other receptacle. In my case the other receptacle (regular outlet receptacles) is located in the backyard and this GFCI receptacle is located in the garage. Every time was raining, the GFCI receptacle was tripping. So I end up replacing both, since both of them already served for 13 years. But only the outside receptacle was bad. But with the installation of the new receptacle I added an additional waterproof cover. If you can see the white wires end inside the outlet box, the load wire usually is bundled up with the other white neutral/load wires. But if you can’t see the end of the white wire, most likely that’s the line wire coming from the other receptacle. Even if you do make the connection wrong, just reverse the white wires and that should correct the connection. Assuming that you already have identified the two black wires, which one of them is the hot wire and the other one is the load wire. In my application, there are of 4 wires plus the ground bare copper wire. 1) Two wires are the load wires (one is white and one is black) 2) Two wires are Line wires (one is white and one is black) 3) Two “line wires” connects to the “line terminals”, and “two load” wires connect to the “load terminals”. As I mentioned, once you have identified which white wire is the line wire that is coming from the other receptacle, the other white wire is going to be the load wire. And in most cases the load wire is going to be bundled up with the other white wires in the outlet electrical box, connected with a short piece of white wire. If you can see this short white wire, then you should know that is the load wire to be connected to the load terminal. Both white wires connect to the chrome terminal screws and both black wires connect to the brass terminal screws. However one black wire is the hot wire, the other black wire is the load wire. Likewise one white wire is the Line wire and the other white wire is the load wire. Before the wiring, the white wires are the neutral wires and the black wires are the hot/line wire and a load wire. Also in a different application, the black load and white load wires can be referred to as the traveler wires, since they are coming from the other outlet. Mostly that applies to the 2, 3, 4 way light switches installation. Don’t get electrified! Turn off the power at the switch breaker before start any electrical work!

Works great. Makes for a tight fit in the box. Be careful.

Muy buenos. Es importante la seguridad de lsas personas y los equipos que funcionan con electricidad. Por ello, en toda instalación eléctrica residencial, industrial y comercial; debieran contener enchufes AFCI y GFCI.

Works great, I've had it for about a year now and had no issues. , Tested it with an external GFCI tester and it shut off as expected. It does take more force to insert plugs into the socket than most plugs I'm used to, but that means it's making really good contact which is nice.

Carga súper bien mi iPhone 14

Save money for both AFCI and GFCI

Great quality, easy to install. Comes with additional lines if you want to feed other outlets with ground fault protection. USB ports all work well.