M-Track Solo USB Audio Interface for Recording, Streaming and Podcasting with XLR, Line and DI Inputs, Plus a Software Suite Included

I honestly think this is great If you YouTube this it gets some hate.... But when you compare it to $200+ interfaces then naturally you're going to get more for what you pay for right? That goes without saying I'd have hoped.. I'm a signed pro musician and I used this to record some ideas I had and it did the job nicely. Yes gain needs to be a little higher but so what. I had no issues on the quality of sound at all, software included was easy to install and use, it's light weight, the headphones input is on the front which is nice so design is good, has phantom power source if you need it (I don't) It isn't the best. Obviously it's like $50...you can't complain about quality of sound engineering, tech etc if you're a musician spending $50 on an interface lmao... Be real... When you compare it to its price, it's fantastic, like I honestly feel you're getting more out of this than the money you spent on it. Legit. I own a fancy 4th Gen scarlet 2 blah blah whatever it's called, but this helped me out when I was traveling record a couple great ideas which now have some great promise in production in a studio. I'm thankful for it For beginners especially, it's ideal, learn on it, audacity etc, without breaking bank on scarlet's etc Even intermediate etc or pros who need a temp solution, it's all round great I recommend it 100%

The product is great, inputs are good. Bought this on an impulse buy and it managed to work out of the other ones I have tried.

Have had very few issues with this interface so far, AFTER trying several things. At first, after getting it and installing new drivers, there was a weird popping noise every few seconds that essentially ruined every recording made with it. I troubleshooted, and found that uninstalling the new drivers and just not using any additional drivers on Windows made it sound better/the popping went away?? Which is weird but it worked. Otherwise, very easy to use and set up - plug in USB, plug in instrument, configure track how you need it (note that the input channels are one input, split into L and R stereo - most audio recording/DAWs will let you then split this track into two different mono tracks after recording). Feels very light - definitely feels cheap/like it would break if you dropped it too much, however for $50, I don't expect much more. Design is nice, though more expensive interfaces have nicer monitoring setups, this is just a light that goes on when it detects noise, and red when you peak - still enough information though.

This thing is great for the price box is super heavy metal does what it’s supposed too wish it was a type c connection but can’t complain for a near $50 purchase using this on a rode pod mic and works great for it I also have a Scarlett solo 2nd gen and works the same as that

I got this to be able to record/monitor my drums and listen to music at the same time and it's inexpensive. Now Im not a professional musician and drumming is not gonna be my main hobby so this seemed to check off all the boxes for me. I plugged it up and it was such a huge step up from what I had. The sound through the monitor quality was so good and latency was zero. Now I plugged up my Bluetooth adapter into the 1/4" line in with a 3.5mm to 1/4" TRS adapter and the audio was absolute garbage. Again, I'm not a pro musician, I'm just a average joe while likes to bang his drums. Thinking it was the adapter, I plugged it into another adapter to hear it from my previous mixer and it sounded just fine. Great, I got a defective unit. So I got a replacement and the same "issue" was present. I realized that I didn't do my research for this and learned that not all 1/4" plugs are built the same. Turns out this only takes MONO TS plugs not STEREO TRS plugs!! So words of wisdom from the worlds okayest drummer, if you get this and want to use a device to play music through the line in, get a 3.5mm to mono TS adapter NOT a stereo TRS adapter. Other than that lesson, it's a great interface!

I purchased this as my first audio interface and it was quite appealing due to its low price. I've used it for just a day but I will probably return it. Firstly, the drivers they ask you to install are piss poor and outdated. They worked for an hour before windows started going crazy and changing the sample rate and bitrate. This caused the output to crackle, lag, and be unusable. The device only works in 16 bit but if you try to change the option for both the line in and out then windows will automatically set it back to 32 bit which makes the device not work. The volume knob has a significant jump in gain near the maximum volume which makes it hard to fine tune your microphone or other devices. I get occasional pops/crackles in my audio while just using my computer. When I had the software installed, it was when I would start/stop a video or listen to a song. Without the drivers, It just randomly happens. This could be because I had the phantom power switch enabled for a bit which from other reviews can fry the device, so I wouldn't doubt I damaged it in some way. I tried to fix the driver problems by uninstalling the drivers and letting windows figure it out. This does work, but not well. It fixes some problems while introducing new ones. It fixes the windows properties so they don't change on you anymore, but after 15-20 minutes the audio device will just stop working. As in, all audio stops working and I have to unplug and replug the interface in for anything to work. You also don't get pro tools with your purchase anymore, which they advertise. Overall, don't buy this. Look at the other 1-2 star reviews as they speak the truth.

Really, for the price, it's a good interface. For a budget-friendly device, it's not professional-grade, but it does a great job of recording. At least in my case, I use it to record my electric guitar and use distortion, overdrive, high-gain amp effects, and other things. You can get a 10ms latency with the default block size. I even have a 5ms latency on my system! That's true, by lowering the block size. I've seen a lot of people say it records very quietly, and the truth is, I don't have any problems with that. In fact, the input where my guitar is connected has the gain at 0; I haven't even turned it up. I just turn up the volume in Amplitube 5 and then add more in Reaper if I want, and it feels like a real amp. Clearly, the configurations, setup, and installation aren't for a novice, and if you're a novice, you should be very patient and read a lot. You can rely on artificial intelligence to guide you through the installation and configuration of everything. Perhaps poor user practices cause this interface to break down very quickly. Don't activate phantom power if you're not powering anything that requires it, don't turn up the input volume all the way. You can listen without using the rear outputs or the front output, just through USB via the PC's audio. I hope my interface lasts a long time.

The M-Track One Solo is a remarkable device up until the point where it begins to experience issues. In my case, it started raising the base of the microphones, and the volume knob wouldn't function properly with my microphones. The Røde NTG2 and the Shura SM7B. As a Streamer and YouTuber, this began to create issues for me. So I sent an email to their support team. I waited four days, and they never got back to me. So I had to call and speak to their customer service team. After speaking to them, I was prompted via email and told that. I need to supply. - The original packaging. - All original content cables, booklets, etc - Proof of Purchase They did supply a FedEx shipping label, but they also got my name wrong on the shipping label, and it felt like they didn't care about supporting their products. I also didn't have the original packaging the M-Track Solo came in either, which raised my concerns further. So I researched if they could enforce such a warranty policy. It turns out that M-Audio could be violating "15 U.S. Code § 2302 - Rules governing contents of warranties" in which they cannot implement unreasonable requests on consumers pursuing warranty claims. The Federal Trade Commission outlines this as "Requiring products be returned in their original packaging." among other things. When I spoke again to their warranty department. They told me that would not be a problem. But this was after; the fact that I raised my concerns on social media. The policy exists in their warranty booklets. So either the individual at the company, in my personal opinion. Is trying to discredit others from seeking warranties by adding discouraging stipulations in which they might not look further into the matter as I have. Or they are just unaware that the stipulation they are outlining in their warranty policy is not legally enforceable. Either way, ignorance is not bliss in this instance. As; for me, it paints the picture of a company that wishes to take your money and try to leave you with a non-functioning product. Either way, I leave this review both to inform consumers of this policy and to prompt change from the company itself. Because I feel a good company should stand by their products and make it very clear without the need to hide behind stipulations to discourage others from seeking repairs in their policy documents. EDIT: It's been a few months since I wrote this review and now the replacement product has decided to give the wrong tempo to my voice when using my microphone, it comes and goes, but it is weird sounding like Barry White.