White Surface Repair Kit

This stuff really works and cures in a minute. A couple of caveats: 1. Use masking tape to carefully mask off any areas around the repair. If you overfill the repair, the sanding to remove the overfill is tedious. 2. Less is more to prevent overfilling. It's a little confusing as to which syringe to use but I found the ceramic works for quartz. Have not used the acrylic yet. I've done 3 repairs -- 2 on chipped ceramic tile and 1 sizable chip on a quartz countertop. The first repair was overfilled and spread into the grout -- almost impossible to remove after curing, but in this case hardly noticeable. The quartz repair took lots of small pieces of masking tape to prevent overfilling, but came out great. See photo. Highly recommended.

Hard to judge as I have not tried any other product, but this did what I wanted. Had some edge chips on 20 year old ceramic tile. Product was easy to use with good instructions. The first "fill" sometimes did not adhere well, but a second attempt was much better. The final patch is not as hard as the ceramic, but is adequate. My repairs are on vertical wall tile, so minimal stress. Can't say how durable the repear would be on floor tile. Seems a bit pricey, but overall, I'd recommend.

I read reviews before buying this. Then I bought it and prepared. Followed directions, read them about seven times before trying. Put clear packing tape over the spot needing repair. Matched my color on top of the tape. Threw out tape and sampling. Knew I had a perfect color match with the Dark White choice. Kit has about six or seven tubes with different colors and ability to mix further if needed. I fortunately did not have to mix. Repaired two small chips in my composite white sink basin. You have to know where they were to find them! Very nice repair! Extremely pleased.

I have used UV-cure materials industrially, but this is the first time that I have seen a similar product available for "handyman" use. This kit "just works" exactly as advertised. The material set up with a simple 20-second exposure. I filled a number of holes in an acrylic shower stall and the material hardened well with 20 second exposure. A bit of work was required to do the finish sanding, but that is to be expected. Working on a vertical surface was helped by chilling the material in the refrigerator before use to thicken it a bit.The only limitation that I observed is that there is a limited range of hues available in the kit for matching the particular off-white of the material being patched. One can darken the material with the included black, but not match a warmer tone.The box I got was marked as a product of Turkey, the blue light source is made in China, the sandpaper is made in Canada, and the kit is assembled and sold by a company in Estonia. Truly an international effort.

The kit is clean and contains detailed instructions. The resin is provided in preloaded tubes that are so easy to handle you could actually use them without gloves without getting it on your hands. The Curing Light is of surprising strength and quality.Unfortunately, it has an integrated power supply (not pluggable) and mine was defective. I opened it up and found what appeared to be an accidental drop of solder on the board joining 2 components. When plugged in, the behavior was continuous flashing of the display light with no ability to turn the LED on.I cut off the power supply, stripped the wires and hooked the Curing Light up to my variable DC power supply at 4.2v. Worked flawlessly.

Read other reviews thought we'd give this product a try. Only to find out after following all the directions, the last information we found after being puzzled as to why it wasn't working. "Not for hairline cracks". That would have been nice to know before purchasing. Emailed concern was told that it did state that on advertisement. I've looked and can't find where that is stated.

Difficult to work with... Hard to match color...

This was so easy to use. I am certainly not the handiest, but this product delivered! I did four chip repairs I total…one on ceramic and three on quartz. I used the white light ceramic filler on all four. The quartz countertop repairs were all angled edges and the plastic dam they provided was perfect. My repairs look amazing! My friend was so impressed she took it to do her countertop. There is plenty of product for multiple repairs! This was a review I had to write!!

I'm a kitchen contractor and had a little mishap on site. Found this kit and gave it a shot. Super impressed. Homeowner is happy and I don't need to buy another slab for this piece of countertop. Wish it was 50 bucks but I'll consider this a win.Tricks I learnedTake your time. I took about 9 attempts to make this look right, changing my mixture each time. The tape strips work awesome but I found leaving it high and sanding it smooth is better near the end. Get better sand paper. I had 400-3000 in the truck and my papers were better. I finished with 1000.

This is laminam table. After mixing some color, the result was excellent.

We used the product on chips smaller than the product is recommended for. Customer support responded very quickly when contacted, and were friendly and helpful.

Easy to use, I have a perfect smooth filling result , almost not noticing if you don't pay attention to it.

Used to repair some chips in a ceramic sink. Experimented with some other kits first and found this to be the most usable. Would recommend over other kits for small ceramic chip repairs.