Runleader Small Engine Hour Meter, Digital Tachometer, Maintenance Reminder, Battery Replaceable, User Shutdown, Use for ZTR Lawn Mower Tractor Generator Marine Outboard ATV (HM011F)

I was a bit hesitant to purchase these tacho/hour/maintenance reminder meters. I felt there was too much functionality for how they are priced. However, I really got tired to taking a stab in the dark as to when maintenance was required for my small engines on my portable generator and power reel mower. Now that they are installed I absolutely would not give them up - even if you're just looking at the engine speed. Setup: I used the adhesive backed hook and loop mounting arrangement that was supplied with the units. I didn't feel like drilling and tapping two small holes for the meter so I took the easier route. I cleaned the back of the meter with a pre-soaked (no alcohol - just soapy grease cutter version) shop towel and attached the fabric with the battery access cutout. It's 3M adhesive on the hook and loop so it's not coming off anytime soon. The coin-cell battery is preinstalled but you have to unscrew the cover and remove the isolator (a piece of plastic) so the battery makes contact with the tabs on the circuit board. No different than replacing a coin battery for any other device except the packaged versions have a sticker you have to remove. Once it shows that it's on your ready to program. Programming: I didn't have to make any changes to the presets but don't assume you won't. It all depends on your engine and the instructions are pretty clear on how to cycle through the steps. I did play around with it a bit just so I don't have to pull out the instructions that I will eventually misplace or lose. But, take your time and you will be rewarded on the first try. Installation: I cleaned off a spot on my equipment and placed the other part of the hook and loop on an area where I could get to the unit without performing any acrobatics and unfolded the spark plug cable (you can use two methods for sensing the spark - I won't go into details here because it's clear in the instructions). I decided to use the "wrap around the spark plug cable method" because I didn't want to d**k around with the ignition coil. My method was to zip tie the meter cable to the housing part of the spark plug wire (the part that attaches to the plug) and then make 5 turns around the cable then zip tie the trailing end of the meter wire to the spark plug cable. Make sure your turns are tight around the spark plug cable and bunched together in one layer - take your time because making sure the induction lead (meter cable) is wound tightly is important. With a pair of diagonal cutters or very sharp scissors cutoff all but 2-3" of the trailing meter lead (just in case you have to redo it and need a little extra in the future. Operation: Nothing to it here. Once I started the engines the unit automatically started reading the speed in RPM - kinda nice to see when you haven't seen it before - it's the small things that excite me. I checked my instruction manual and the meter indicated what the manual stated - give or take a few RPMs but nothing major. For example, full speed on my generator engine is 3600 RPM. The meter was reading 3590 - 3610 RPMs. I consider that a success. Cleanup: I placed some zip tie bases in a couple of spots so the meter lead would stay clear from the hottest part of the engine. But, keep in mind it is an air cooled small engine (speaking only for my two) after all and they are built tightly with only a bit of space in order for the internal vanes to push air over and around the engine. In Closing: Nothing major to discuss here but keep in mind the following: 1. Take your time (it took me roughly 30 minutes for the first one and no more than 15 minutes for the second install), 2. If you know the characteristics of your engine program the meter prior to installing it, 3. If you can avoid it try to keep the actual meter away from the hottest parts of the engine, 4. Make sure your meter lead is tightly bunched and wound, in one layer, around the spark plug cable, 5. Start your engine and enjoy the view, and lastly, 6. Go enjoy a cold, frosty beverage - mine is 60% Simply Lemonade and 40% Gold Peak sweet tea - my version of an Arnold Palmer.

RUNLEADER Small Engine Hour Meter – A Must-Have for Every Small Engine! Wow—what an awesome little device! The RUNLEADER hour meter was an absolute breeze to install and works flawlessly right out of the box. This thing is a game-changer for anyone who wants to keep their small engines in peak condition. The maintenance setup is brilliant—it tracks your oil changes and other service needs with ease and even flashes to remind you when it's time for action. No more second-guessing or missed maintenance intervals. It takes all the guesswork out of the equation! But the real star? The built-in tachometer! Being able to monitor your RPMs means you can dial in performance and make sure your engine is running at peak efficiency and within safe limits. It’s an awesome feature, and for best results, I highly recommend double-checking the RPM readings against a certified meter during setup to fine-tune accuracy. I honestly couldn’t be more thrilled with this product. The install was quick, the display is clear, and the features are just what every small engine needs. I’ll be grabbing more of these for all my tools around the shop. Highly recommended—don’t think twice, just get it!

This actually works quite well on my snowblower to set high rpms. I can't figure out how to turn it off but it's been on for a year and it's still working . I mounted it permanently.

I bought this to use with my 93 Ford Ranger Splash 2.3l i4 because it didn't come with a tachometer from the factory. Installation was a breeze as there was already an existing factory hole in the firewall which I threaded the wire through to reach the spark plugs and mount next to the instrument panel. The build quality is what you expect from a $15 tachometer, but I figure you already know that. Overall, this product delivers, and I am satisfied. Only wish the screen could be brighter for night time driving and that the wire was a bit longer, but not a huge deal.

My mower's B&S 4.75hp Quantum engine has slowed down over the years. i bought and installed a new throttle spring but it seemed to be running extremely fast. So I bought this tachometer. With 5 wraps around the plug wire and programmed 1P2R, the new throttle spring produced 8, 040rpm. As per the instructions, some 4 stroke 1 cylinder engines will need to be programmed to 1P1R if the reading is inaccurate. After changing to 1P1R the rpms read 4,020. I then put the old spring back on and read 2,6030rpm, which indicates the apparent slow speed. So I put the new spring back on and bent the throttle spring tab to reduce the rpms from 4,020 to 3,160. The engine now sounds more normal and the mower cuts and mulches much better. B&S specs 3200rpm for this engine so I'm confident I now have the correct speed adjusted. I don't have a need for the hour meter, but am satisfied with the tach. I also appreciate the ability to manually turn the Runleader off and replace the battery when needed.

Gummidichtung für Batteriefach war bei Ankunft bereits verklemmt und ergo beschädigt. Damit ist das Fach nicht mehr wasserdicht. Kann passieren, für mich war das keine Voraussetzung beim Kauf also egal und ist ausgenommen von der Gesamtbewertung. Inbetriebnahme und Einstellungen sind rudimentär aber ausreichend und zweckdienlich. In der Preisklasse darf ich nur beurteilen, ob das Gerät den Angaben entsprechend funktioniert, alles darüber wäre vermessen zu erwarten. Ich habe keine Möglichkeit die Genauigkeit des Gerätes zu prüfen aber das Gerät ist funktionstüchtig und angezeigte Daten scheinen glaubwürdig. Schnelle Lieferung und gratis Versand nach Österreich ... 5 Sterne und ein Dankescön

Broken in 5 days Change the battery also not working

Wired in unit, set up for engine, started engine, all good. Returned 1hour later, started engine, the digits cycle randomly, doesn’t work & continues not to work. Ordered another from elsewhere.

Fa quello che promette e sembra(miracolosamente)farlo bene. I giri stimati sembran plausibili.non ho notato differenze in tal.senso aumemtanso o diminuendo il numero di spire. Il funzionamento é semplice, sul sito del produttore trovare le istruzioni in pdf..l autonomia(sulla carta)é altissima, solo la guarnizione del vano che la contiene mi lascia perplesso sulla effettiva impermeabilità. A didferrnza di altri si azzera, potete scegliere il promemoria della manutenzionene se vedere sempre il conta ore al posto del conta giri o vedere le ore solo a macchina spenta..ad ora nn ho davvero nulla da volere in più!

Instalação super fácil e funciona tal como descrito, permitindo medir com precisão as rotações do motor da minha mota Yamaha FZX750.