Samson MB1 Mini Boom Stand

I use this stand for micing my acoustic drums. It can be great for micing the front or even inside of the bass drum if you have a port hole. However I only have a two mic setup currently, so I mic the side of the bass drum diagonally, to get some click from the beater and pick up some of the other drums and cymbals as well. This stand works great because of the weighted base and for any of your low height micing needs. I think I briefly used this as one of my stands to mic my Boss Katana 2x12 combo amp. It makes micing an amp a bit easier too and reduces the profile of the equipment around the amp and working area. Though this may be a bit expensive for low height amp micing. You could probably get an average low height mic stand unless for some reason you really need to reach with the stand to get the mic where it needs to go. Still a good stand and not so expensive for a name brand.

First things first, I have absolutely zero experience with this type of gear. My background is photography (cameras, lenses, meters, radio control devices, tripods, studio flash gear, et cetera), construction and pest control. My experience is what tells me this is a well made piece of gear that I wouldn't hesitate to take to a construction site or a photo shoot. I'll be using the stand to hold an omnimic to do room analyzing measurements with. http://www.amazon.com/Dayton-Audio-Electret-Measurement-Microphone/dp/B002KI8X40/ref=sr_1_sc_1?ie=UTF8&qid=1354286429&sr=8-1-spell&keywords=Daton+EMM-6 If you need to add more weight then the stand is designed to hold, then add more counter weight or get a heavier table stand. There's no excuse for overloading one's gear. I worked thirty years in the construction trades and I'm use to putting gear through it's paces to tear broken things out that are made of big timbers, pipe and steel, and put them back together again with power saws/drills and big heavy hammers; Milwaukee, Skill, Ridgid and Stanley tools. The point, I know how to use gear to it's max and after many years of use, not break them. The point, if anybody tells you this is a fragile piece of gear, it's because they're abusing the gear beyond what it was designed to do; at a reasonable price, hold a microphone in a static position and then be moved again. When using this stand, if the mic is falling over, it's because it's being over extended, over weighted, poorly cabled, not leveled or the legs of the stand are improperly positions; one leg should face away from the weight load in the direction of the tilt. The mic stand is not falling over because it's not stable, the base is too light or it's poorly designed. If parts are breaking it's because the parts are being overtightened beyond what they were designed for. A little bit of common sense regarding not abusing your tools goes a long way in extending their usefulness. People who break their tools and then blame the tools, tick me off. And yes, we all have experienced products that broke the moment we plugged them in for normal use. That's what a warranty is for. I don't care what the other reviewers have to say about this mic stand. It's a beautiful piece of gear, that's well designed and will give it's owner many years of service. Eventually, one day, years down the road, the parts will get old, brittle and break but don't we all. Based on personal experience with lots of tools, used under extreme conditions (heat, cold, dark, rain and under houses), I expect this piece of gear to last many years of regular use and then if it breaks, without complaint I'll say; I got many years of use out of it as I only paid $27.00 for the stand and that included delivery. The point, for a well constructed mic stand, this is a great price. You'll be hard pressed to find a better product at any price and yes, I've looked. I do have one niggle and that's the hand-twist action at the center of the stand to tighten the center clamp of the main support. It's a bit flaky as to tightening but with patience, it locks things down just fine. This niggle is not a reason to take this item off a list of possible choices or an excuse to knock a star off a possible five star rating. If one is expecting a table top mic stand they can throw around the stage in anger to impress everybody (Oooo, he's scary) with their lack of personal self-control, get an all metal stand who's clamps are made of steel or get a different profession where, due to their lack of self-control, won't be able to break things. If one is going show self-control and respect their gear, expectedly, this mic stand will last many years and like most well used items, eventually die a gentle, quiet, well deserved death. I love this stand because it's well made, is good looking, has lots of well placed adjustments to make it very functional and delivered, is well priced. Hope the above review helps.

This stand is very sturdy, highly adjustable and all of the hardware and knobs seem well built and stable. And if you don't need much height (above 40"), this stand is perfect for use in small, tight spaces. I bought this stand to replace a regular sized tripod boom stand that was taking up a lot of floor space and area in my home office-studio. This stand is perfect for what I need most: mic'ing small combo amps and acoustic instruments that I play while seated. The only negative is the base, which screws on. There's nothing wrong with it functionally... it works very well... it's tight, stays put and it's heavy and sturdy. But it's not the type that folds for storage, which I'd prefer. However that's not enough for me to give it less than 5 stars. Given the quality and flexibility it has at this price, I would highly recommend it.

I've used a Samson MB1 Mini Boom Stand as a desk stand for five or six years. It offers great flexibility with adjustable height and with a two-piece (telescoping) boom that allows great reach and balance. There's a small counterweight on the end of the boom (opposite from where the microphone attaches) that helps counterbalance the boom. Here's where gravity comes in: The heavy-duty base isn't round; it has three fixed-position legs or "feet." If you position the microphone so the boom extends over any one of the legs, the stand is not likely to tip over. But if you position the microphone between the legs, of course it's going to tip. I use the microphone and stand on my desk. The stand is positioned to the left of my computer monitor, and the base is rotated so that one of the three legs points directly at me. That means another leg is at right angles to me, pointing to the left. When I want to use the mic, I rotate the boom (I keep the boom loose on the vertical post) so the mic is positioned over the leg that's pointing at my mouth. When I'm through with my recording work, I simply swing the microphone to the left, over the leg that's pointing to the left, and the mic is out of the way and solidly supported. There are four adjusting clamps (one to control the length of the boom, one to control the horizontal placement of the boom on the vertical post, one to control the angle of the boom, and one to control the height of the vertical post), and they all work well. I've returned to this Amazon page to buy my second Samson MB1 Mini Boom Stand, to take on the road. In the past, I've used the stand on my desk when going on the road, but I'd prefer to have a separate stand with my portable equipment so that I don't have to "rob" my home studio every time I need to go on the road. I've looked at close to a dozen stands. This is the only one I've found with three legs or "feet" that comprise the base, which results in solid support without excessive weight.

This thing is heavy which is great. Running it with a Sennheiser Mic in front of a guitar amp and its a great stand. Very adjustable and it definitely wont move on its own.

This is a really great mic stand, really well built! The only negative I can find is that the mic clamp adapter may need some work. It holds a SM57 perfectly in the clamp, but the screw that controls how the mic swivels up or down is not very good. The mic will fall downward sometimes and the screw is difficult to tighten (the reason for 4 stars instead of 5. I would prefer 4.5 stars, but can't choose that!). However, you can replace the stock clamp with another one if you like. Overall this stand is very well made. It has a heavy base which keeps it sturdy. It is low profile, and easy to place in difficult areas. It works really well as a snare mic, but can extend upwards of ~42 (+/-) inches, which may work for floor toms as well. Great mic stand especially for the price!

I really enjoy this and I was surprised with the quality for the price. For it's intended use of my purchase I use this extended pretty much all the way to mic my acoustic guitar, while using taller microphone stands for vocals. This works perfectly well for me with that intended use. Also I have used it folded in to mic my guitar amps to run them into an audio interface. Other uses can be as a desktop stand for doing any vocal or podcast work. Yes, you want to use this balanced the correct way so that it does not tip. To have a stand leg pointing toward the direction the microphone is aimed toward. I like this a lot and am about to order a second. It's very pleasing to see some products still made with sturdy materials and not having to worry about breakage or cheap plastic parts. This thing is sturdy and so that hasn't been an issue at all.

This little fellow is well built out of mostly steel and is heavy for its size. The locking knobs do their job without fail and I don't have to over crank them to get them to hold. I use it sitting on top of my table which holds my computer, recording interface and all the other stuff I use for recording. It adjust perfect for vocals and I drop it down if I want to use it for recording my acoustic guitars without using a pickup. Same with my violins. I get a different sound recording through a mic than I do a pickup. The base is heavy and will hold a mic with the boom extended all the way. You must turn one foot in the direction of use to get a full extension but with a minute retraction, it will stand securely in any direction. I set it where I want it then just swing it out of the way till I need it. I have used it sitting on the floor by my chair and reaches fine for vocals or acoustics. It's just more accessible on the desk. This would work fine for drummers. I would recommend this to any of my critical buddies. Thanks

Heavy narrow base and long reach make this an excellent stand for a snare drum. Clamp a small goose neck on the shaft and you can add an under-snare mic also. Much cheaper than LP Claw options. (See picture)

Good product

Incredibly solid for the price. The bottom base is a heavy die cast piece that will last for centuries. The box it came in is way to big for the dimensions of the product, in my opinion, the manufacturer could cut down shipping costs with a smaller box. Anyway, excellent quality. Thick metal were is most important, and good quality plastic for the rest. I don't usually write reviews, but Samson made a great job with this product.

This is an awesome desktop Mic Stand. High quality construction, including connections. and heavy cast base makes for a mic that will not move when mounted. Highly recommended.

さすが音響機器メーカー製だなと感心しました PC周りのマイクに使用とバスドラ用にと購入です 中心軸とブームにも歪みがなく、作りしっかりとしています。 土台となるウェイトも、結構な重量があるので安心。 これは私の使い方の問題ですが、デスクに置いてコンデンサーマイク、ショックマウントを付けてブームをほぼいっぱいに伸ばして角度もほぼ90度にした場合、さすがにウェイトが負けました 通常であればこんな使い方はなかなかしないので個人の使い方の問題です 通常の使い方であればなんら問題ないウェイトの重量です。 むしろ重いくらいです ブームのクランプ部分も重みで下がるなどはありません 物の質を考えるとかのりのコスパです 個人的には垂直の軸がもう少し短い方が使い勝手良かったような気がします あと、買う前は気づかなかったのですが、ブームは2段階式になっていて、狭い場所での設置に非常にいいです これはおすすめ出来ますね