iCarsoft CR Pro Full Systems Diagnostic Scanner Code OBD2 Tool 2022 (check your make and model before you purchase)

Does abs on my Toyota rav4 mk2 , tested on Freelander also works , its a must have tool for diy mechanic and at the prise cant be beaten, no messing with dongles and no battery's to replace.

Excellent diagnostic tool dose every thing I wanted it to do

I bought this OBD scanner to help me resolve a non starting issue with our 1999 SLK 230 R170 I asked a question here if it worked with the SLK and had or saw 2 customer responses to say it did, but because they were from customers, I also went onto some suppliers sites and again got some positive feedback for using it with our SLK. First issue was that it needs a red 38pin iCarSoft adaptor which wasn't mentioned here, but luckily it was mentioned on a suppliers site. My main gripe, is that when my mechanic used his Launch OBD reader, it pulled through a lot of error codes which included a very important one that indicated a fault in the driver authorization system and probably the cause for the non start issue. The iCarsoft CR Pro did not pull this error code through and instead it only pulled a number of historical codes. I plan to take this up with iCarsoft but as I've used the scanner I doubt I will get my money back I think what I'm saying is, please DO NOT provide answers to questions unless you know the correct answer. £275 is a lot of money to spend on the wrong tool Edit - following this initial review iCarsoft worked with me and enabled the reader to function with our SLK and pick up the codes I had expected it to, so I have moved up to 4 stars. So, if you find the same, don't just give in, contact the makers! Trev

Used it to find fault on srs system

I bought this product hoping to get feedback from the ABS module, unfortunately it did not perform this task and it also failed to show feedback from a number of modules on my Cayenne 955. I liaised with customer support in the USA, they tried four different software updates and then studied the log files after each attempt. Eventually they decided to advise me to return the product, as the product was over 1 month old it fell outside of the Amazon refund facility, the seller, mistakenly, advised me that I could not have a refund, which is contrary to the UK customer rights act, namely, if a product does not perform as per advertised, it is either “ inherently faulty “ or “ not as advertised “ . Sustuu ( the seller ) we’re not helpful at all, and had to be coerced all the way through the returns procedure. I will not buy from this seller again and continue to look for a different product that will perform the tasks I require but it is definitely not this product. ICarsoft uk have advised me that the same software on the CR Pro is also used on the POR V2.0 model, if that is correct that model will also fail to perform as advertised.

Need a hand with the item as it won't connect to the car now that it's Neen updated

Good value for money!

Good tool be surprised what this pice of kit can do other readers wear giving me the wrong readings but one was on similar path to a snap on one cool tole

Owning a Chevrolet, Porsche and Toyota I was looking for something that could work with all three. I wanted to perform routine maintenance like reseting service lights and read codes for occasional repairs. While doing research I stumbled on the iCarsoft CR Pro and decided to take a chance. Glad I did. Have been able to read Engine, Drivetrain and Body status with no problems. ABS, active suspension, steering wheel sensors, door locks, transmission sensors, HVAC temp sensors pretty much anything I tried to find I could not only read but check live data on and reset. Capture of codes is simple too. Data can be easily saved to the microSD card for reference later. Really fantastic tool for the money. Lookup for codes is pretty accurate considering the variety of cars I have. Overall I am really pleased with the unit. One thing surprised me, the tool does not have a battery. Most readers have a small 9v or a few AA batteries that power them. This one uses an external power source via USB cable. That means you connect the OBD cable to the vehicle and then connect a mini-USB cable to the tool then plug that in somewhere to provide power. In the case of my Toyota there was no USB power port to connect to. You can power from a 12V lighter port with an adapter or use a portable USB battery. I decided to use a portable battery pack and have no problems with it.

Produit conforme à mes attentes, Diagnostique très efficace et facile à prendre en mains. Reçu en avance que la dates prévue Rien a redire De plus petit soucis pour la mise à jour vite régler par le vendeur le lendemain de mon mails

Satisfied

Original device, plenty functions, working on mercedes-benz. Recomended.

Bought it in order for changing brake discs on a VAG with electronic parking brake. Works as expected and now I can also check for errors and clear them myself. Note: you need to turn on the ignition in order for the auto discovering of the car. Also make sure that battery on car is healthy or connect a charger so the voltage doesn't drop when e.g. pulling back the motors for the EPB.