BLACK+DECKER Hammer Drill, 6.5-Amp, 1/2-Inch (BEHD201)

I put it straight to work and it performed great 😃 👍 good product I believe.

THIS DRILL IS VERY GOOD, WENT INTO CONCRETE EASY, MUCH BETTER THAN EXPECTED. I HIGHLY RECOMMEND IT.

I have never used a hammer drill before so this review lacks context. That said, it does an adequate job of drilling into concrete. I'm sure a more expensive, professional-grade tool would have more power and do a better job, but this one is fine for my homeowner needs. The supplemental handle is held in place by a screw-clamp and could be more secure, but it works. Overall, a fine tool for the price.

Just to let you know: A few years back I purchased a 20v Drill from Black and Decker and was amazingly surprised that it worked so well. Especially since it was priced much lower than other brands. This new hammer drill that I recently purchased is actually one of the best investments I have ever made; and; for the price, if you need one you are nuts for not buying this. I have had a large outdoor umbrella on a stand that I previously had bricks stacked on all four legs to keep it from falling over. Within an hour, I drilled 8 holes into cement and screwed them down with 2 1/2 screws. It is now very sturdy and is permanetly connected to the cement slab. (which can be removed if I decide to move it somewhere else. If you have any doubts about Black and Decker drills, forget them. These are fine products well deserving of a 5 rating.

Best $50 I have ever spent on Amazon. This inexpensive hammer drill worked great. Powerful and reliable. A+

if you're the sort of person that sometimes doesn't read the manual (like me) you might just put the bit in the chuck, twist it, and think that's all you need to do - and that will work for a smaller drill bit. But for the 3/4" bit I needed it wasn't working and the bit kept getting loose because I wasn't pushing the button to lock it in place. NOTE: If you connect the side handle first (like I did) it's hard to see this button! Anyway, I drilled through brick with this and it was respectable. I'm guessing a more expenisve model would be faster - but if you don't need to drill through brick or concrete too often, this is a great drill for the price.

Absolute garbage. The stability handle literally started burning and melting after just a couple of minutes, plastic smoking and flying everywhere. Should never happen. I expect more from B&D, where is quality control? I’ve had it way too long to return but have only used it twice. Very disappointing.

In the world of impact drills, you get what you pay for. This impact drill from Black and Decker works well and it is simple to use. The drill works far better at drilling into concrete than a conventional drill and I completed about 50 holes in concrete before the keyless chuck failed. The keyless chuck that is installed is not capable of handling the abuse of impact drilling. Note that even though the drill says 1/2" it is in fact a 3/8 drill. The side plate on the drill says 1/2 in (13mm), but the connecting thread mount is 3/8'' - 24UNF. I replaced the chuck with: https://www.amazon.com/gp/product/B0BTY6ZPZ2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

works great

Muy buena herramienta. Ofrece un buen desempeño.

Better than expected for the price. Lightweight too. Comes in handy for any projects where you need to drill into masonry.

Hammerdrills fine into concrete with the smaller bits I used so far. The handle collar is difficult to correctly position and tighten. It slipped forward unnoticed and got chewed up badly. A far better tightening system would be a twist handle which is common to similar drills I've used in the past.

It's easy to drill a hole on the concrect or stone. It's very good product.