Extra Large Marine Foam Roll

The foam is of good quality, and the adhesive backing is adequate for many applications. However, it doesn't adhere well to other foam. I got the foam to put on a CPAP machine to absorb sound waves, making it quieter. It performs that job well. I have also used the 0.25-inch thick closed-cell foam with upholstery leather backing to pad the outer socket of a prosthetic leg. It has served that function extremely well.

I used it to wrap the ducting for my range hood in the cabinet above it. It helped cut down the noise a notch, about as much as I could expect from foam this thin. It came in a nice roll. I would have preferred it to be rolled in the other direction so that it would naturally conform to the pipe better based on which side has the adhesive, but I also understand that other people would want the opposite for different projects. Either way it’s nice and was easy to cut with a box knife and the adhesive is VERY sticky.

I'm using this to provide heat insulation and sun shade on the plexiglass escape hatch on my tractors. After cleaning the plexiglass with windex and allowing to dry, I measured, cut then applied the foam. It was fairly easy to apply, and this stuff is so sticky that you'll need to make sure you get it right the first time as it will not come off to reposition without tearing. So far, this is working great and the cab of my tractor is much cooler.

This foam is dense, and holds up well once installed. It feels very high-quality to the touch. I wrapped the sides of my garage lift with it, and it's doing great after a month of use. The adhesive is useless. Plan on gluing it down. I used an 'indoor construction adhesive' I found at a home improvement store. Plan to cut it with a fresh utility knife blade, and be sure to press hard enough to get through in a single slice. If you make multiple cuts, you will get janky edges that you'll never clean up.

My camper van had floor insulation… but it was still letting a lot of cold air seep through during winter. I bought this roll of foam as a way to add an extra layer of insulation. I cut the roll of foam to size to fit my layout, and added a layer of cat-scratch material on top to act as carpeting. The cat-scratch material had a sticky adhesive on one side, which helped keep the strips of foam together. Got creative with what I had (leftover roll of cat scratch adhesive) and it turned out exactly as I envisioned! Now that extra layer of flooring is removable and easily folded to be stored when I don’t need it during the summer. Thickness and insulation factor worked amazingly. Love that it also prevents transfer of sound which is useful when I’m stealth camping. Easy to install and measure out. It lasted me one winter already and I’m excited to use it again this winter. It’s durable and I’m sure it’ll last this winter as well.

A thin foam can almost be rubber. Adhesive is good. Trimming requires sharp blades and cleaning of the blades. I didn’t have any problem. It was used on a seat bottom cushion to increase the size compared to the seat leather fabric ( the factory size) but a 20 yo car. Seats have compressed.

Works great! We wrapped a galvanized tub with it. Stuck right to it, was easy to cut and work with. Filled the tub with ice to keep drinks cold. Product provided good insulation. No water from melting ice anymore. Thumbs up!

Just as described super sticky …using to go around vertical window unit outlet for motorhome window with a floor ac unit ..seals great

Protection interieur d'un coffre de remorque. Facile à couper et se colle aisément grace à l'autocollant. amorti les chocs.

The adhesive backing on this stuff is amazing, it sticks down first application and does not budge. Make sure your placement is perfect the first time you put it down because that’s where it’s staying.

I used this in a sit-ski bucket. Works great. The adhesive is really sticky. It ships fast.

Great material but bad adhesion so had to improvise with marine carpet fastening screws

Great quality