Hogue Overmolded Rubber Grip for SIG SAUER P938 Ambi-Safety with Finger Groves, Black - 98080

Fits perfect very comfortable in the hand and ads an enormous amount of grip compared to the factory grips.

Perfect fitting grips that give you a very secure grip on your Sig. Some words of caution: UNLOAD the weapon first and always before performing any maintenance. Next, remove all rounds from the magazine as you will need to make sure the attaching screws DO NOT interfere with the free movement of the magazine. It is easy to tighten the screws to where they keep the magazine from moving freely by protruding into the magazine channel. As the screws are tightened, take a wooden hunky stick and slide it on the inside surface of the channel into which the magazine fits where the screw holes are to make sure the screws do not protrude into the magazine channel; this is very important. Also, I recommend blue Loctite on the screws to hold them in place once they are seated properly. Then install the magazine in & out several times to assure proper movement. Then take it to the range and fire a couple of full magazines of ammo through it to check for function; only then is the weapon ready to carry. Once properly installed, these are fantastic grips.

Ordered 2. HELPED improve grip on compact gun

I have two of these for one for my Sig938 & M&P Shield+. These grips make all the difference!!!

Top quality with perfect fitment.

I absolutely love these grips. The increased width towards the bottom of the grip really helps lock the gun into your hand. I have found this to be particularly advantageous when using a flush magazine. Before installing these grips, it was very hard for me to feel confident drawing the gun from an ankle holster because it was hard for me to get a good grip on the weapon. But with these grips I feel very confident. Now, the extended magazines do not match the profile of these grips (the extension on the magazines is significantly skinner and there is no second finger groove). This felt very weird to me. It has no affect on my accuracy though. Using JB Wield, I shaped one of my magazine extensions to match the profile of these Hogue grips. It works magnificently (although keep in mind that I have small hands which is probably why the second finger groove works so well for me)! The reason I took off a star is the screw problem that some others have mentioned. If you tighten the factory screws down tight on these grips, you will cause a malfunction in your magazine well. For awhile I only tightened the screws to the point where they were still recessed inside the magazine well. This worked fine for several months. The grips were just a tiny bit loose (but they were not going anywhere). Today I had my Dremel out and decided to shorten the screws just to the point where I could tighten them all the way and still have them be recessed. I then cleaned the threads with alcohol, applied some loctite, and screwed the screws tight. The grip is now secured firmly and I will not be taking it off anytime soon!

This is a very comfortable grip. Very inexpensive way to dramatically improve the feel of your gun. I have been very impressed with it so far. I have large hands and have always had trouble finding the right carry pistol sig p938 is a fantastic gun! Having said that there are some extras that i feel are very important for this gun are 1 this hogue grip 2 extended magazine 3 galloway precision aluminum trigger (stock trigger is plastic and gritty as you squeeze it), and hammer spring (hammer spring brings the trigger pull down from about 8 pounds to 5 pounds) 4 aluminum main spring housing (stock is a plastic housing with a notch that holds the sear spring in place. One of the first things to wear out.) 5 use frog lube paste on all internal part. Do those things and you will have a comfortable, reliable pistol with a great trigger pull.

I decided to give these grips a chance to see if it helps with the purchase of the gun. The model I have is a Sig Sauer p938 extreme. The factory circumference around the grip was 4 15/16" After adding the new grips it was 5 1/4 ". The new hogue grip added 5/16 in circumference around the grip. The new grip seems to give me a better overall feel of the gun while pointing it. Unfortunately living in New England it's too cold outside to test the recoil with the new grip. I hear a lot of people complain that it adds too much to the grip for concealment. All I can say it's not even noticeable. I carry every day and I currently have it on my side right now and you couldn't even tell the difference. A good addition to a great gun.