DEEBOT X8 PRO OMNI Robot Vacuum and Mop, 18000Pa, OZMO ROLLER Instant Self-Washing Mopping, 167℉ Hot Water Mop Washing, Auto Cleaning Solution Adding, Hot Air-Drying, Self-Emptying, Black

Updated to five stars on April 8, 2025. Ecovacs sent me another unit and this one is amazing. It seems the units I had to return may have been a part of a bad batch. The new unit has triggered zero error messages for the past few weeks, cleans and mops amazingly well after quickly scanning and mapping my rather large house in less than 30 min. The AI is responsive and well implemented. The best part, and the ultimate reason I stuck with Ecovacs, is the level of support I received, and the commitment to resolve my issues, which is super rare these days. A bit of constructive feedback on the Ecovacs app: - The cleaning log currently only reports each session as "Rooms Cleaning", along with duration of sq footage of each job. It would be substantially more useful if the log included which room(s) were cleaned in each job and what type of cleaning was done (i.e. Vac, Vac and Mop or Mop after Vac). - The bugs I reported in my original review are still yet to be fixed. Overall, I am impressed with the X8 Pro Omni and would highly recommended. Original review: I really wanted the Ecovacs Deebot X8 Pro Omni to work. Unfortunately, it turned out to be a disappointment and I would not recommend it. I saw the Deebot X8 Pro Omni at CES in January and bought it as soon as it became available on Amazon in February. Out of the box, the unpacking and setup experience was seamless and I was very impressed. The bot very quickly scanned and mapped my rather large house with little corrections. The app is pretty intuitive and I very quickly figured it out. The problems started on Day 2 of using the Deebot. It started throwing a "Bumper Stuck" error for no reason. It would do that 8 or 9 times per run regardless of whether it was vacuuming or mopping. Each time the bot was not actually stuck under furniture in any way, just sitting there waiting to be reset. To get it to continue, I would need to bump the bumper as instructed in the app, and then push the button on the bot to continue. For a modern top-of-the-line Ai-enabled bot that is supposed to vacuum and clean the house without intervention, this was a terrible experience. It is virtually impossible to leave this machine to finish the job on its own without having to bump it and reset it every few minutes. In fairness, Ecovacs email support was pretty responsive. I contacted them and they asked me to reset the bot to factory settings, then start over. That didn't help, unfortunately, as the bot kept throwing the same "Bumper Stuck" error every few minutes after reset. At some point, a piece of plastic fell out of the machine. I sent a picture to Ecovacs support and they determined that the broken piece could be causing the "Bumper Stuck" problem. Ecovacs offered to send me a replacement unit, but would not specify timeline and I decided to return it to Amazon instead as it was faster and more convenient. I immediately purchased another Deebot X8 Pro Omni as I thought the first one was just bad luck getting a defective unit. On Day 2 of running the new unit, the same exact issue started happening. "Bumper Stuck" error every few minutes without the bot actually being stuck in any way. I contacted support again and they offered to send me another replacement, without committing to a timeline again. I decided I'd had enough of unpacking, packing and repacking Deebots, so I returned it through Amazon again and have since purchased a different brand, which should be delivered in the next few days. I do like Ecovacs as a brand, but it seems they may have released the X8 Pro Omni a bit prematurely. The product needs a lot more testing to deliver to expectations. In addition to the issues described above, I discovered a few more bugs while going through the process of troubleshooting. - The app has a couple of areas that reach a dead-end blank screen, forcing you to completely kill and restart the app to get out. - When the station's dirty water tank is full, instead of showing a message to empty it, the app throws a "Robot dirty water box error" with instructions to pull the box from the bot and "clean it". Well, the dirty water box on the bot is full simply because the station's dirty water tank is full, not because it has malfunctioned, and you need to find that out by trial and error. Bottom line, not ready for prime time. I'd wait for this product to mature a bit before purchasing.

**Update after 6 months of using it, I'm downgrading it from 4 stars to 1 star** It's still an amazing vacuum cleaner. It deeps cleans the carpet and does a good job of vacuuming on the tile floors. BUT! the auto-empty doesn't empty itself, I have to manually clean it out every single time it returns to the base. The cleaning solution holder still has the same amount as when I first filled it, so evidently that is not being used. I have yet to figure out how to make the mop not leave streaks on the tile floors - I've set it at high water, medium water, and low water usage and all of the settings leave streaks. These are especially bad on the places where the robot rotates around table legs leaving circular streaks. The robot gets stuck a lot, sometimes over and over in the same place even when I move it to a different spot (it will just return to the same spot.) All of this means I can't leave the house if the robot is running because I will come home to a stuck robot and a vacuum dust bin that is overflowing. And it still takes forever to do any of the jobs I ask - vacuuming the two bedrooms and one closet that have carpet (400 sq. ft.) takes an hour. That's if it doesn't have to be unstuck from something. I'd throw it away tomorrow except I paid $1000 for this robot, what a dope. Original Review - Here's what's good about the vacuum part of it - it is a awesome vacuum, getting actual dirt out of my carpets. Here's what's not good - it's so good at vacuuming the carpet that the dustbin fills up, clogs up, and then doesn't empty. I have to manually clean out the dustbin after each carpeted room. Kind of defeats the purpose of an "automatic" vacuum. Here's what's good about the mop part - I'm not having to mop the floor myself. But I had to set the water "level" at 40 (high) to keep it from streaking. And it took a little bit of figuring out to set it to mop up and down the same direction as the tile planks instead of going across them so you can't see the lines of where it mops. But my main dissatisfaction with this is that it is SLOW! I have about 1200 sq ft of tile floors and it takes almost 3 hours for it to vacuum and mop. Again, not having to do it myself is worth a lot, but trying to keep the dogs off the floor for that long is a chore too.

This is truly the upper echelon of robot vacuums. Ecovacs has done an immaculate job of improving on the T30 version of the vacuum. There are so many small things changes and configurations that set this vacuum apart from others. I have three dogs, hardwood floors, tile, and carpet rugs so I run this vacuum every single day. I'll break down my thoughts below. SETUP Setup is extremely easy - only needing to attach the base piece to the station and plug it in. For the vacuum just snap the small brush on. The app setup is really easy as well - scan the QR code on the vacuum and follow the steps in the Ecovacs app. VACUUM The most important question for any robot vacuum is does it do what it should, and how well. The vacuum delivers on all levels. This is one of the few vacuums that I feel does a great job on standard suction and you don't have to use turbo suction (which saves battery). I primarily have tile and hardwood floors with a few small rugs, so I can't speak to carpet too much. This vacuum has a small extender for the corner brush that does a great job of getting hard to reach areas. MOP This is another area where they have done a lot of improvement. There is a roller brush that does a great job of mopping hardwood floors. The mop extends out to get all the way to the end of walls really well. PITCREW (Station) The docking station makes everything a breeze. The dust bag is larger, the water tanks are bigger, and they have added a cleaning solution tank to automatically add floor cleaner to the water. I haven't had any issues at all and love everything about it! The water tank lasts about 2 weeks using it frequently. The dust bag lasts about a month for me. I have 2 dogs that shed so that is pretty good. APP / MAPPING Not to be repetitive, but this is another area where they have made a lot of improvements. The app does everything you expect, but I'll highlight a few things: If the robot ever gets stuck the robot will mark the map and recommend where to add barriers to prevent getting stuck again. After a few runs it no longer gets stuck. The app has some great settings like the option to force the robot to go vacuum if the water tank is empty (when it is supposed to mop and vac). There is an option in the app to vacuum carpet/rugs first, then vac and mop everything else. This is nice since sometimes the mop will get rugs damp. You can also set rug suction boost OR reduce sensitivity so it doesn't suck up thin rugs and drag them due to strong suction. There are also nice option to reduce noise like have the vacuum sit lower to the floor, and even reduce dust collection power at the station so it isn't too loud. FINAL THOUGHTS This review is already really long so I'll end it there, but I am so impressed by so many small things about this vacuum that I can't list everything. It really goes above and beyond in adding so many small customizations that are provide a solution to small complaints about other vacuums. Although expensive it is absolutely worth every penny.

overall this robot is excellent & effective. it is also sophisticated and requires a fair amount of TLC. expect a learning curve, especially for initial configuration and to customize for your house. I have a single level 2k sq ft hard floor house. --⭐⭐⭐⭐⭐ because the performance far outweighs the negatives-- I bought this specifically because of the roller-style mop (with dirty water tank!) and ability to specify no-go areas to avoid cords. performance is excellent for both. GTK: - this X8 is nearly identical to the Yeedi S14. both brands are owned by the same company. filters are interchangeable. - there is an initial learning curve to figure out the app, settings, maintenance, how to unclog as needed, etc. after that hurdle (5 wks) I do love it. - thick wool carpets are basically not compatible (to be fair, these are tricky for anything except my Dyson upright) - it has trouble with my 3x5 Ruggable: slightly flips up the the edges & corners - the chenglish voice is amusing, but understandable. it says 'starting intelliGent (hard g) cleaning' & '*arrived* start time'. - hair: handles hair well - I have long hair. I also have a short haired dog that sheds a lot. it handles both well. - thresholds: I have low thresholds between wood & tile. it crosses these easily but occasionally leaves some debris (acceptable imho) - app: the android app is good & bug-free. scenario clean & schedule features are excellent. otherwise the UX is good-ish; moderately intuitive. it's extensive. took me a while to find all the important elements. Set up: - mapping UI is good & lots of features, but glitchy. initial setup is easy, but I spent at least a few hrs tweaking it. (for example, it's difficult to know precisely where to locate furniture or virtual boundaries because you can only see walls in that view. cleaning paths & current robot position are not displayed) - initially, plan to invest several hours over the first few weeks to set up & learn this robot & app. - the unit is larger than you might think from the pics. 18"dx14wx21h. i put it under a built-in cabinet-style desk, and it takes up ~60% of the knee area. Maintenance - there are several components to clean/maintain. they are easily accessible. - the app does a good job of notifying you when to do maintenance, with illustrations - the debris filter is under the top cover. this is not mentioned in the printed manual - there is a drain tray in the base. also not mentioned Special maintenance: - debris: my robot accidentally vacuumed a wet bathroom floor, which clogged the debris channel. took a bit to figure out how to remove components to unclog it, but overall I was impressed that the design makes all the channels accessible for maintenance. the robot did not alert me that it was clogged, but it was leaving large trails of wet debris. - mop: the channel to empty the dirty water became clogged. resolved after cleaning the drain pan & dirty water box new users: - I've had iRobots for many years so I wasn't surprised by the general traits. but here's are some points first any new users - this is about as loud as a normal stick vac. so you probably aren't going to want to read or watch tv while it's running. - it takes a long while to clean. it has to travel back to the base to empty debris & clean the mop. the vacuum then mop also requires extra travel time. it also cleans under furniture, so more area than an upright vacuum. - if you haven't used a robot mop or vacuum before, expect very dirty water & lots of debris collection for the first few weeks. (even if your house is already very clean) recommend empty the dirty water frequently to keep it fresh. for one thing it's cleaning *under* furniture.

I've had this unit for 5 months now, and initially it could complete the whole cleaning scenario on one charge, and now the unit needs to charge halfway through the clean. The base station is also super dirty, it leaks dirty water underneath, which is inconvenient and rather gross. It also seems to be getting stuck more and more on carpet edges, and getting stranded more often than it has in the beginning of it's life. Is good for very light floor maintenance, but overall I am not incredibly impressed about the unit for the price.

Excellent little cleaner of both carpet and bare floor. It figures out what to do where without you telling it to mop or vacuum. It is fast, and it has been a LIFE CHANGER for me on my tile and wood flooring. The app was designed by someone who thought like a German. (Deep, complicated, thorough, but not necessarily super easy to figure out.) If you can figure it out, it's super helpful. There are many levels and layers to the app. After 9 months, I am finding it easier and a lot more helpful than I did in the beginning! You can even take a video of wherever the little guy is cleaning if you want to. That is helpful for when it is stuck-- I can turn on the video (as long as it's not out of battery) to see where it got lost. It hasn't been perfect, but some of that is my fault. I bought replacement brushes, and even though it SAID on Amazon it would work, the vacuum was stopping at every turn and complaining of something. So I eventually bought ANOTHER set of brushes, and those worked. Every time I need to replace a part (mop, etc.) I have to look up how to do it because it isn't super easy. Because it works so hard, some parts get VERY DIRTY. I have had to take it apart (and I am no engineer), and it is a little bit intimidating. The support chat has been quite good to respond and emails me instructions. They have so far been as good as their word. My vacuum has been leaking water from the base, and I contacted them today. They sent me detailed problem shooting along with photos so I could tell what they were talking about. It has also been emitting a strong odor of mold. I took out the tray below and found mold. It might be because the tray was misaligned and then water got trapped. I've been using Lysol and hot water to clean out the tray. So, would I buy it again? Yes, but with my eyes wide open as to keeping it clean, and knowing I would have to learn to take it apart and clean parts that get VERY DIRTY. I don't know if there is a simpler version out there, but overall, I am very satisfied with the technology and the cleaning power. I wish it were just slightly less tall, because occasionally it will get stuck under a low chair or couch, but with it's mopping power, I don't know if that is a logical desire. This is the 1st Ecovac I have purchased. I have previously owned Shark (good, but lowsy app control), i robot (great app, but didn't last very long). UPDATE: My vacuum gets an A plus for cleaning my tile and wood floors, but a C- for getting stuck all over the house. It "climbs" the legs of my grand piano and can't "get down" the one inch it climbed on its own. It does this on table leggs, my fireplace rocks, and random other areas. I'm getting tired of rescuing it. Does it clean well? YES. Is it annoyingly needy? YES. I'm almost ready to replace it because I'm so bugged about always rescuing it.

The Ecovacs Deebot X8 Pro Omni was a robot I purchased last year when it was newly released. In general this robot has been cleaning my house for over a year, while it may not completely replace the mopping and vacuuming I do at home, it does at least handle 80% of my cleaning activities on my 1500sqft+ house. Pros: - Love the obstacle avoidance. I have 3 kids at home, all under 3 years, and even when my kids stand in front of the X8, it avoids them and navigates around them. - It goes and charges back when battery is low and continues cleaning. - I have this set to clean every single day, and I love its AI that it detects some heavy stains and goes into mop only mode to try get rid of the stains and clean its roller mop water after the event. - It extends to the side corners, which my previous Roborock vacuum did not do. - Love the roller mop style vs the traditional circular mop pads. - Mapped my house perfectly Cons - It sometimes may get lost, but it's every once in a while. - Hoped it could be a little thinner so it could go below my dishwasher and TV furniture. It can't get to those areas by very few mm. - I had issues with the robot dying when battery was low and trying to get back to the dock. Thankfully customer support was quick on this and got a replacement robot and haven't faced issues since. - Sometimes getting to cleaning the mop pad and the mop tray, it causes odor issues, and sometimes it gets hard to get and clean, just so many parts to clean. Wish the maintenance could a bit less than other robots. In general, a great vacuum and mopping robot, especially given it was the first rolling mop technology on the ECOVACS products. I am very interested in upgrading to the X12 once that is released, but I'm happy with the robot so far and customer support.

We've had Deebot X8 for 2 months now. At first we weren't sure we liked it. Left streaks on floor. But, after forcing it to remop rooms several times it cleaned up years of ground in dirt and left fewer streaks. When you bucket mop a floor you end up mopping with a dirty mob and dirty water. Even with the two bucket method. We've programmed Deebot to vacuum and mop every day. Keeping everything clean makes it easier to clean. The phone app, on the other hand, needs A LOT of work. Not intuitive at all. Hard to program, hard to navigate back to all the various sub menus. We had defined a couple of no-clean zones. We still can figure out how to delete just the zone without deleting whole map and remapping. Also, can't figure out where to go to create new clean and/or no go zones. Luckily, fixing apps is easier than redesigning hardware. Update - just found out a firmware update removed my ability to define clean and no go zones. Worse app I've ever used.

Absolutely FANTASTIC! It is a bit noisy in the early hours of the morning when it starts. But you can start it whenever it suits you best. It cleans really well, easy to maintain and you can set your daily schedule as you wish. If you have an accidental spill, you can just send your deebot to clean it. LOVE it! I have had it for more than a month now, I wanted to ensure it was good before I posted a review. You can definitely make your life little easier with this robot vacuum.

Mops and vacuums well. But the app is the most bugged thing ever. Throwing error codes that doesn’t make sense and then it turns off everything when entering the docking station and goes offline. Now I spent 3 hours trying to reconnect it. But it simply won’t, so it’s pretty much useless now. Used it for 4 days, now have to return it. Sad cause it cleaned well. Could live with the app being bad, but when its not working at all 👎

الجهاز لازم تنظفه كل يوم او يومين وياخذ وقت. طبعا لازم تغير القطع الي فيه كل فترة، يعني خساير اكثر، وكله يعلق في اي شي ومايطلع فوق ٢ سانتي، على هالسعر والله مايستاهل

Carpet cleaning is good, hard floors are okay. Mopping is also good. But everything else is a big letdown. It gets stuck sometimes in the dark (it doesn’t have a light in the front). It can’t seem to dock properly in the dark and wanders about the whole house until it shuts down at some random location in your home. Battery run time is bad and charging it up takes so long. There is no “just mop” feature; it’s either mop and vac, vacuum only, or mop after vacuum. All in all I would give it 2 stars for its mopping performance.

Garbage in all aspects. I prefer other brands