Duratool 18-Inch Lightweight T-Bar Applicator Bundle with 18-Inch Refill Pad Included – Ideal for Smooth & Even Floor Coating Application | Perfect for Polyurethane, Stains, Sealers & Floor Finishes

Right tool for the right job. If you are applying polyurethane on your wood floor. This makes your job 300% easier. Just pour and drag. the lamb wool is must harder to do. perfect tool for DIY.

Got this to do a diy sand/ refinish of some old hardwood floors. I've never done a refinish and bought this based on YouTube videos and manufacturer recommendations (not this specific model, but to use a t-bar). Not much learning curve so I got the hang of it pretty quick and my project turned out nice. It saved me a ton of time and got the quality job I was hoping for.

Make sure to use tape and defuzz before using..

Great

First time trying this, I got the 18" version, The floor is drying now, but the results using it were great, easy, fast coverage, it didn't drip too much either, I used a tray to load up, I know people poor and spread but I didn't want to try that. UPDATE: The finish is better than anything else I've used, it's dry, and super smooth.

It’s perfect, works well and does exactly what it should. I wish it was sold with the rest of the handle.

Great product

Remodeling a home that has 1,000 s.f. of 50-year-old oak flooring. Sanded throughly, stained and then debated on how apply the water-based oil-modified poylurethane. My 24-yr old son applied the poly with this T-bar system while I did the edge work with a brush and kept his 18" paint tray properly filled and out of his way. Took us about 3 hrs to apply each coat. Abraded, wiped-down & prepped per poly instructions. Applied 3 coats and couldn't be happier with the results! Just remember to "land" and "take-off" from the floor surface as if the T-bar was a plane. Keep the applicator moving as you land and take-off and you won't have any problems with puddles or streaks. Don't push down on the applicator at any time, or you may get bubbles in your finish. Don't rub applicator on paint tray & don't submerge it either. Just dip it deep enough to thouroughly coat the bottom half, then TOUCH it on the paint tray ribs and hold it over the tray, rotating it if necessary to wait for any dripping to stop before applying to floor. GOOD LUCK!

Fonctionne très bien lors de l application d epoxy. Bémol rouleau de remplacement très coûteux

Fantastic piece of equipment. It saved hours and hours of back breaking work, with a brush, painting the decking around my pool. My hard wood decking has no groves and so it worked brilliantly not sure if there would be pooling if you had grooves.

C’est un outil formidable!! Une fois que l’on a compris comment l’utiliser tout devient facile et efficace. L’apprentissage de cet outil ce fait très vite, très heureux de mon achat.

Ive just sanded down our hardwood floor and this T bar applicator is perfect. I just poured clear coat varnish in a line on the floor and this applicator does the job perfectly. I just put it on the end of an extendable pole, not included, there is only one foam applicator but i wrapped it in a plastic bag.

Bright enough to light up a medium size washroom