Super PDR Dent Puller Kit, Car Dent Removal Kit with Bridge Puller, Small Dent Puller for Auto Dent Removal, Small Dents, Door Dings and Hail Damage

I was a bit dubious to use this. Bought a BMW 6 months ago and, on the first trip to Costco, someone dented my door (I suspect intentionally). It wasn't huge, but was definitely noticeable...and super-annoying.Last time I had a ding removed (on a Mazda) it cost me $250. Figured with inflation and a Bimmer, it would be 2x that. Still, I was worried. Not so much that it wouldn't work (I'd only be out $25), but rather that it might damage the paint and finish in some way and make things worse.My fears were unfounded. The device worked - it took me two attempts, and I'd say it's 90-95% improved but not perfect (if you know where to look, you can still see a slight dent). But to someone just walking by, it's no longer noticeable.It does take a bit of work to get the glue off, but the included scraper and 90% alcohol make it easier. I'd say it took 3-5 minutes to remove.The one question that I had which I couldn't figure out is, "how much do you 'turn the puller' to get the dent out, but not create a raised bubble of some sort." Well, it kind of happens automatically. As you're slowly screwing and pulling the dent out, the tension between the puller and the glue increases such that the dried glue self-detaches from the puller (and remains on the car). So you don't get a raised bubble. And you just remove the dried glue with the scraper and alcohol.I'd recommend giving this a shot.

Great for small dent repairs! The results were impressive, and no repainting was needed. The glue cleanup took some effort, but it was still much cheaper than a professional fix.

The Bag is good size, everything fits, and it has side pockets full length to tuck in the Light board and instruction sheets.The Light board is lightweight plastic and NOT illuminated.the slide hammer is smallish, mostly steel. The slotted end for the glue tabs is non-magnetic (Al?)The dent lifter requires some assembling, is mostly metal and feels solid in the hand. The feet attach with very thin hex drive screws that may be a weak point.The bridge puller and slide hammer are both smallish.All of the glue tabs are there.The glue gun heats slowly, has a switch on/off. Again Smallish in the hand.The Suction cup is Full Sized, my hand fits inside the handle comfortably with room, seems really capable tool.Tap down hammer is smallish, but the knock down head tap is a good size with many tips. There is also a set of plastic taps that will be long enough to use without hammering my fingers.Raining today. I will set to work on the civic with before and after photos soon.

This was an “okay” kit. One thing that gave it 3 stars was the functionality of it. Customer beware the glue does not come off easy at all. I tried everything to get the glue off and it took longer to get the glue off than to actually pull the dent off. What sucks to is if you pull the dent out and try to pluck the glue off it ends up just pushing the dent back in even if you warm the panel back up. Very frustrating.

Do not buy this kit. Everything about it feels incredibly cheap and low quality.The very first time I tried using it, the glue stuck so badly that it completely ripped the paint off my car, making the damage significantly worse. It doesn't work at all. I only used one single tool from the entire kit, saw the disaster it caused, packed everything back into the box, and returned it immediately.To make matters worse, it has been three months since I returned it and they still refuse to give me a refund.Save your money and your car. It will only ruin your paint and leave you with a bigger problem. Total waste of time and money!

With only 200 miles on the odometer of a new car, some careless person did a double-tap on a rear door with their grocery cart. Two small dings and scratched paint. A shop gave an estimate of almost $1,500 and about a week to get repairs done. I already had 2 open claims related to a house fire so intended to pay cash for the door dings. But I thought, what if I pay to fix the door and then weeks later the car is damaged again? So, I ordered this tool to see what I could do on my own. Happy to say, I was about to reduce the ding size by 95%, and then I bought a kit with matching paint and clear-coat for the scratch. The ding was too ‘sharp’ to pull out completely, but reduced to a 1/4”, barely depressed area. It’s not perfect, but hardly noticeable. Now I won’t stress over keeping the car ‘perfect’. The kit is easy to use, well worth the cost, effort and time. Might come in handy for vehicles of other family, or friends. Recommended.

Complete kit. Very easy to use

Not pleased. Glue won't stick to the tool tip

The kit arrived with plenty of suction pads and worked as described. I got perfect results pulling dents on my Seat Alhambra, but the thicker steel on my Saab and awkward contour was more difficult. With hindsight I should have bought additional long sticky pads

Schwerer als gedacht in der Handhabung

Buena herramienta aunque la silicona se puede mejorar. Cuestión de proveerse de pistola y silicona más adecuada. Por lo demás perfecto. Lo recomiendo y tengo tres Talleres de reparacion

Good Quality for the price ! Thanks

Arrivato puntuale kit soddisfacente usato per addrizzare parafango e porta non male fa il suo dovere