GKU Dash Cam Hardwire Kit, Type-C Hard Wire Kit, Mini-Fuse, 3.5 Meter USB C Port Wiring & Low Voltage Protection, Converts 12V-24V to 5V/3A, Car Camera Charge Power Cord Kit for 24H Parking Monitor

Quite surprised how easy this was to fit. Simple use a volt meter to find blue fuses (15A) where one is live without the ignition turned on and the other only goes live when ignition is on. Simply replace the kits fused wire with each fuse. Find an earth / ground point and screw thet other wire to the metal of the car. Done. I faffed about double and treble checking because the instructions didnt tell me that their wires with fuses on were 15A fuses (I know nothing about cars) but a quick check on what the fuses were using AI and job done. I could have done it in 3 minutes had I just replaced fuses by the colour (Blue). Anyway, the cable length is plenty and I simply plugged into my GKU e200 dash cam and that was it.

Made hard wiring the dash cam very easy

Although I took care to make sure that the hard wiring kit had the correct mini-fuses for my car, the plastic plugs were too bulky to fit in the slots in the fuse box in my Range Rover, so I had to buy piggy-back fuse extensions and plug the hard-wire kit into those, which is not ideal. I mentioned this in my original review, and GKU contacted me to pay for the piggy back fuses, a very nice gesture from a very good company. If you are in doubt whether this will fit your car, get https://www.amazon.co.uk/dp/B0CTX8CMY4

Happy with the item just right

The kit looks good enough. I would have installed it by now if it had come with any fuse adapters. The description says: *Note: The fuse adapter of this hardwire kit is mini-sized. If your car doesn't fit mini-size, search B0CTX8CMY4 for our another kit with four different sizes: Low-Profile Mini, Mini, ATO (Regular), and Micro2." There were no fuse adapters in the kit I received. Fuse Taps are Trivial item, but kit is useless without them. Ordering some from another supplier on Amazon, hope they as good as GKU own...

Good price and simple to wire up Dashcam.

3 reasons this kit is useless, 1- the fuses are not replaceable 2- fuse amp are not specified so how do I know which fuse to put them, imagine I put them a fuse slot with 20amp and this hardwire could be 5amp. It would blow and mess up everything. 3- for example TOYOYA USES mini fuse, how would you fit this there ? in the demo video for tgis product the person is hiding the fuses with multimeter and you can see kind of what he does, where he touches a live fuse and shows the multimeter reading but when he puts the fuse he uses an already empty slot. Fooling people. I do not trust this kit at all, for £20 its junk. I recommend you buy Vantrue hardwire kit where it has replaceable fuse slot. Imagine your

2months ago had car fitted with GKU front & rear dash cam. No complaints & it required Hardwire kit so made sense to buy GKU again..working absolutely fine & well made but let’s see how it fares after winter & those salted roads etc…2B Cont’d

Super, livrer avec un notice ou tout est marquer pas besoin de chercher sur internet savoir comment brancher et tout . Au top

sehr gut

Il kit funziona perfettamente e il supporto tecnico del marchio è sempre disponibile e rapido nelle risposte. È una soluzione ideale per chi vuole alimentare la dashcam in modo permanente, sfruttando la modalità parcheggio e la funzione di spegnimento automatico. Modalità parcheggio attiva 24/7: La dashcam resta operativa anche a motore spento, utile per sorveglianza continua ma è possibile programmare auto spegnimento (per esempio dopo 12 o 24 ore). - Auto-spegnimento intelligente: Protegge la batteria dell’auto evitando scariche eccessive. - Installazione pulita: Una volta montato, il sistema è invisibile e non occupa prese accendisigari. L’installazione sulla mia Captur ha richiesto qualche modifica: L’auto non aveva slot liberi e il fusibile premontato nel kit aveva una plastica troppo spessa per entrare correttamente anche se il fusibile era dello stesso tipo. - Soluzione adottata: Ho tagliato i fusibili originali del kit e utilizzato due cavi ruba corrente acquistati separatamente. Una modifica semplice, ma da tenere in conto se si ha un’auto con spazi ridotti nel box fusibili. Consiglio extra: Per un controllo totale, consiglio di aggiungere un mini interruttore a bilanciere nascosto sotto i fusibili: permette di spegnere completamente la dashcam in un attimo, utile in caso di sosta prolungata, manutenzione, o lavaggio auto da parte di terze persone.

Goed aan te sluiten in de auto

top