HUANUO Single Monitor Arm Desk Mount for 13 to 32 inch Screens, Tool Free Height Adjustable Monitor Stand with Tilt Swivel Rotate, 75 & 100mm VESA Mount, Load 19.8 lbs, C-clamp & Grommet Options

Did quite a bit of research on the best arm mount for my 27'' 7 kg monitor. Thought this was the best price for what it does compared to the others. And it is. It is extremely sturdy, very manuverable, can change the tension on all points of rotation on the mount and loons simple. Gives my desk a very clean look and the cable management is very good and hidden away. Took ten minutes to set up. Fits standard vesa 100 X 100. Worth the money.

Very well made, strong and secure. Once adjusted works very well and easy to move to new positions. Used with a 27" LG TV. My desk is quite thin so used a block of wood under the base to make it thick enough for the screw clamp to work, it is though very secure and has shown no signs of coming undone in the months I've been using it.

I bought this to free up space on my desk, and to give me a bit more flexibility with my monitor, which is a 32" and weighs around 6kg. So far, it has done the job admirably. It is very sturdy for the most part and feels well made and durable. The parts fit together very easily and set-up took very little time overall, as the individual pieces click together, with just a little allen key adjusting to tighten. The vesa mount is easy to attach as well, and my monitor (which has 100 by 100 set up) was able to easily slip onto the top screws, which held it in place while I screwed n and tightened the others. Adjusting the arm is very easy, and feels stable, I'm far from an expert but the gas mechanism seems to be doing the job. Its effortless to raise or lower, but then holds steady once you let go. A couple of quibbles I'd highlight. There is some very minor wobble when typing a lot, but its not hugely noticeable and I haven't found it bothering me. This may also be related to the fact that my desk is on a carpeted floor, which has a bit more give than hardwood. It's also less noticeable the less extended the arm is, so if you're planning to use at full extension that's worth considering. The other thing worth noting is that the clamp used to fix the base to your desk needs to have flat contact on both sides. This is important as a lot of desks have crossbars that connect the legs underneath. If you have this kind of desk, you'd need to use something to allow that flat contact, e.g. a block of wood the same width as the cross bar. I didn't find this issue hard to solve, and this might be a consistent issue across most monitor arms, but worth noting. Overall, this is a very good piece of kit. I'm sure there are better monitor arms out there, but for my use-case it does the job admirably. For the price, its an easy recommend.

I've 'upped' in size my monitor for my Mac Mini and stepped up to a 27" LG 4k monitor The main issue is my desk isn't that deep and to have it on its stand, on a riser, it'd be a bit too close unless I set it at an angle and I'm not keen on that This arm clamps to the desk cleanly and fitted the monitor without any issues. Took me all of 6mins to get it fitted, attached to the desk and switched on. Very impressed and would highly recommend

Great bang for buck. It was easy to set up. Sits nicely behind my desk and I only had to move the desk a few inches from the wall . Makes my desk looks much cleaner and gives it a lot more space. It is sturdy and was able to position it exactly thow I wanted both height and distance away from me. It's a little tricky if you try to put my than two cables through the cable management but for the price it costs I was very happy.

Top notch quality… I own another and cheaper monitor arm from this brand but this one is something else. It cost £20 more but the price is justified. The putting together was incredibly easy . Quality is superb and heavier than any of the flimsy ones I bought… followed clear instructions and had it up in 5 minutes.

Very impressed. Was for my wife's new office desk. Holds a 27" curved Samsung monitor nicely. Easy to manoeuvre, secure mount to the desk. Also comes with fittings so the mount can be bolted to the desk, rather than use the clamp. Comes with vesa mount screws for clamping the monitor to the bracket.

UPDATE 11/12/2023: It can't have 5 stars because of the cable groove narrowness, but having now compared the HUANUO to another brand (with common parts!) this is more solid, better made and better value for money. I attached a 6.5kg monitor to the other brand rated at 6.9kg and it works, but it bounces around a lot. That didn't happen with the HUANUO. The desk mount is better designed, and the arm itself is separate from the desk mount, making installation that much easier. The other brand also had more plastic parts; this just feels like a quality product. Following an initially unsatisfactory support call, HUANUO subsequently went out of their way to put things right and make an upset customer a happy customer. They went further than the extra mile and deserve credit for it. I am impressed with their commitment to service. It's good and solid and great value for money; just take care pushing your cables through. I have attached images of the groove widths and note that a 6.4mm diameter power cable JUST went through (but the 7.2mm HDMI didn't). I am going back to the HUANUO arm for the heavier monitor. UPDATE: comparing now with another product this is better engineered. If your cables fit easily it's definitely a great product. Model HNSS6 Rev03(A) has a "C- shaped" (cross section) cable channel with what *looks like* a spring loaded entrance groove. It's not clearly illustrated in the manual (p12), but obviously you are supposed to push the cables down through the slot. Unfortunately, the plastic is brittle, and neither spring loaded or very flexible, and the slot is too narrow. Design flaws: poor choice of material, entrance groove too narrow. If you use "too much" force - whatever that is, but HUANUO support say, "Ah, you used too much force!" - it will break, and you will no longer have a cable retaining channel at all. Mine broke on trying to push through a 7mm diameter, 3m HDMI cable whose connector would NOT pass through the end of the channel. If everything fits OK and you don't break the plastic, then they seem like good solid arms. Warning: even a standard power lead required *some* force to pass through the groove. I am however intending to replace mine because a) it broke, doing exactly what I had to do to install the cable and b) they don't have replacement parts for that. The manual says nothing about maximum cable widths, or special precautions to take when installing cables. As I say, I liked the rest of the construction and they feel solid, but this fragility is not for me. Had they had a spare part I would have limited myself to a caution, but since they don't, I would think twice before buying this. If your cables are thin, go for it though.

Amazed by the flexibility of this thing. Really can turn at any weird angles which helps my work. I’m able to turn the monitor to face the visitors as well back to an angle where people standing could see. Love the hydraulic sound that comes with it that sounds like robocop. Only downside is I still haven’t figure out how to loosen the adapter holding the monitor. The instruction is to use the Allen key but it doesn’t fit. Need to check online on this

Facile à monter et de bonne qualité

Perfect fit for my Lenovo legion r27s and it is very smooth and it has a very nice spring, easily adjustable and it fits on lots of desks, but it isn’t very stable on very large desks which have a big table top height, either way its a very good monitor arm and I would recommend this because its very stable and cheap

Awesome

I have 3 ultra-wide 34-inch monitors on my desk. The included stand has both tilt and height adjustments but being curved screens, the monitor intrudes onto my desktop space. This is not a big issue with the 2 monitors, but the 3rd needs to be moved occasionally to access the mini-pc behind it. I needed to type of swing-arm style mount to not only clear a little bit of desk space but also be able to easily move the 3rd monitor without having to lift it. This Huano single-mount monitor arm fits my requirements perfectly. I can now swing the monitor a lot easier when needed. Assembly and installation were fairly easy. I appreciate the 3-piece base which allowed me to set it up and clamp it without having to move my desk. The two swing arms were easy to assemble and lock in place. The tension was enough to hold my 6+ kg monitor / 14 pounds (as listed on the manufacturer's website). All parts and tools needed to assemble were included in the box (including 3 sizes of Allen keys and a Phillips screwdriver). No need for any additional tools (unless you were going for a through-desk mounting). My only issue was the upper cable guide which seemed relatively limited and harder to fit. I was only able to pass 4 cables through the guide (power, dp, hdmi and usb). Fortunately, these were enough (instead of the usual 9 cables). Overall I am very happy with this mount and I am glad I didn't cheap out with other brands.