SwitchBot Smart Lock Pro, Keyless Entry Door Lock, Smart Door Lock Front Door, Electronic Smart Deadbolt, Fits Your Existing Deadbolt in Minutes, Add SwitchBot Hub2 to Support Matter, Alexa and Google

Works very well and in combination with smart key pad touch provides you a high range of possibilities to lock and unlock. Furthermore the App is very stable and provides you useful information wherever you are.

Works very well, but to pay attention to the type of cylinder you have

I received the product and set it up - that part was really straightforward and easy. Less than 2 days later, it completely stopped working. The app showed no response and the device wouldn’t respond after changing batteries either. Amazon promptly offered me a refund. I then found the same product at a local seller at a discounted price and decided to buy the replacement from there, thinking that I must have received a one-off defective unit. I set up the replacement unit and that worked for under a week and then it is back to the same situation - the device does not respond and it fully stops working. There is a reason why this product is significantly cheaper than similar retrofit smart locks from companies like Nuki or Aqara. I’d strongly recommended against buying this product.

I bought a US version by mistake and I couldn’t fit it on my mortise lock. So I reached out to Switchbot support who managed to push EU firmware OTA on my Switchbot lock pro that made it compatible with my mortise lock. I told them what happened and they were generous enough to send me the mounting plates for mortise lock for free of charge.

This is a horrible lock. Gets "jammed" all the time. It got jammed while we were out. We couldn't get back inside the house because the lock wouldn't open the door and keeps saying "lock is jammed". Me and my whole family (including children) were stranded outside our own house because of this horrible lock. I had to bread open the door and damage the frame. I will raise an official complaint against Switchbot.

Good one with lots of member, keypad is a must. However I cant find a battery that can be recharged. Some people need to change the lock cylinder to use both this device and key. Loud noice, but manageable.

This is their new smart lock, and overall, it’s pretty solid. They claim it's compatible with all locks, but for mine, it wasn’t 100% compatible. I had to use my own screws, so I wouldn’t say it works for every lock out there. It really depends on your specific lock and screws, but if you’re handy, you can probably make it work. Unlike the previous model that used 3M adhesive strips, this one uses screws, which makes it more robust and reliable. It’s not going to fall off like the 3M version sometimes did. The lock itself works fine, although I’ve noticed it occasionally jams, especially after the recent software update in September 2024. The batteries are holding up well, and despite the installation being a bit tricky, I managed to get it up and running. I use it daily now. Software Perspective: The software is decent, though it could definitely be improved. There are a few bugs here and there, but overall, it gets the job done. I do appreciate that they release updates from time to time, and I’m happy with that. However, I’d love to see more features added, like auto-unlocking when your phone is nearby, so it detects your presence and unlocks the door automatically. Additionally, to connect the lock to Wi-Fi and use it with Alexa, you need the SwitchBot Hub Mini, which I already have (an older version, but it works just fine). With that setup, I’m able to control the lock using Alexa, which adds a lot of convenience. Price and Value: From a price perspective, it’s definitely cheaper than its competitors, which was the main reason I bought it. They’ve also improved the quality compared to older versions, which is a nice touch. Overall, I’m very happy with it and would rate it a solid 5 out of 5.

One of the best smart locks in the market. Very easy to install and has many options for different style locks. Works locally on a Matter network using the hub, so using the lock is quick, reliable and privacy focused. On AA's the battery life is decent, changing them once a quarter, there is a battery upgrade available from switchbot that is an excellent option. It is a bigger lock from the inside, but from the outside you keep your normal locking cylinder. So it looks like you have a standard lock. Overall great lock, reliable, and at a great price.

Easy to install over my existing lock and quick to calibrate. Unlocking and locking works well. The API access was very useful for me, as it allowed me to use Tasker on my Android phone to control the lock and see its status. 4 out of 5 stars because the functionality to auto-unlock when you get near only rarely properly triggers for me. It's a beta functionality though, so perhaps it will be improved. Overall, would recommend.

Kapi kimitlemede sorun yok fakat kapı açmak için her seferinden kalibrasyon gerekiyor. Aldığıma pişman oldum, 4 ay'dir kullanıyorum, iki aldığımda 1 yıldız vermiştim, Nuki ile kıyasladığımdan fakat adil olmak gerekirse Nuki'den eksikleri var fakat 1 yıldız değil, şarj edilebilir pillerle kullanıyorum 2700 mah fakat full full şarj edip takmama rahmet şarj seviyesi %36 max seviye gördüm,

This smart lock is a perfectly functional but average smart lock. If it's your first or only smart lock, it will do the job properly. However, it ends up looking rather average when you compare to the functionality offered by other smart locks at the same price range. For context, I already have a ULTRALOQ U-Bolt Wifi Smart Lock installed that I'll be comparing this lock to, and I got this smart lock for another door. Out of the box, the U-Bolt has a keypad and is wifi-enabled for remote access which are both features that the Smart Lock Pro requires separate accessories ($50 for the hub and $50 for the keypad) for yet the U-Bolt is the same price as the base Smart Lock Pro. If I were someone who cared to consolidate everything into one app, had other SwitchBot integrations to connect the Smart Lock Pro to, or already had an existing SwitchBot Hub, then I would see the appeal of sticking with the Smart Lock Pro and paying extra for all the accessories to unlock the full functionality. I would have also liked to see this smart lock come with wifi out of the box without needing a hub or included a keypad as part of the standard package. While I can understand the desire to lower the price by offering a barebones package, in practice, having to take out your phone in bluetooth range and use the app to unlock and lock the door is really annoying. There are definitely things that this lock does better than others: the simplicity of installation, lock compatibility, and motor power. I was very impressed with how fast I was able to install this lock despite having to take off half of the deadbolt. The box came with everything needed to install the lock including tape to hold the lock in place and even a screwdriver. I've installed other locks which took a long time because I had to take off both sides and put together the innards of the lock. Locks that just fit over the existing knob don't have the compatibility that this locks has. There was one annoyance with the installation: The tiny hex security screws for both sides of the lock are annoying to install when you don't have much clearance on the side of the lock especially since the lock is so bulky and sticks out so much. I would have wanted the lock to be wider or longer than stick out so much. Other smart locks that I've used also had trouble locking when the deadbolt is not perfectly aligned or a tight fit and this lock had no problems with that. Turning the lock manually is very smooth and tapping the button to automatically lock is just as fast. So far I haven't seen the lock jam. While the lock does provide a magnet for the door to detect when it is closed so it can auto-lock, there is no space on the side of my door to fit the magnet. Fortunately, this smart lock can still function without it installed; you just don't get any auto-lock functionality which I can live with as I don't want to rely on that. Another piece of functionality that I wasn't able to test but seems really cool is the ability to pair unlocking or locking the door to an NFC tag. It seems like tapping the NFC tag with your phone will trigger the app to unlock or lock the door so at least that can save you from having to open the app. Edit: I was so frustrated with unlocking the lock solely with my phone that I got the keypad and now the experience is so much better. The keypad is solidly built with clicky buttons and the right amount of lights to indicate status. It was dead simple to pair to the lock, mount it outside the door, add a new unlock code, and enroll a fingerprint. SwitchBot seemed to have thought of everything when it came to the entire keypad package including multiple ways of mounting and even a wet wipe to clean the surface where you're going to mount it. It also came with a NFC card that you can use to tap against the keypad to unlock although I'm not sure why you'd use that to unlock over a key code or a fingerprint. The keypad supports up to 100 codes, fingerprints, and NFC cards all locally which is truly impressive. It also has emergency codes and fingerprints which will trigger a push notification through the app, but unfortunately this functionality requires the hub. The nicest thing about the keypad is that because it is mounted separately compared to other smart locks, you can still reuse your existing key to open the lock. I'm still frustrated that this lock isn't WiFi enabled and requires a hub especially when there are other SwitchBot devices that don't require a hub, but having at least the keypad has made it possible for someone else to unlock the lock without me being around.