YOOPAI 3D Printer Enclosure with Ventilation - Multifunctional Tent Cover to Eliminate Odors, Noise and Dust for Creality, Anycubic, Elegoo Series LCD SLA DLP

Excellent value, the material is robust, full enclosed the print keeping in fumes and spills. Assembly was quick and easy took less than 10 minutes. And plenty of space, fits a Elegoo Saturn 4U with space to access the USB port, and space to lift the lid without needing to fully unzip the flap. Decent length of ventilation hose and fans works well. Has made a huge difference as I no longer get any fumes at all when zipped up and fan running. This is a must have for those who don’t have space for a fume cabinet.

This enclosure is a game changer! when I first started 3D printing without an enclosure, the fumes from the resin was filling the house and it became quite dangerous, once i built this enclosure and used it for the first time I couldn’t smell it at all (Apart from when opening it to take out prints) but when you have prints going for long periods of time it can become very intoxicating without the enclosure. The only problem most people have with this is the instructions aren’t great but there’s a video on the product page that makes it easier to follow, my advice is when you’re piecing the frame together, push the poles into the corner pieces until it somewhat clicks to get a straight and even level all around the frame, also check the fan for the airflow arrow to make sure it’s blowing outwards of the enclosure like an exhaust. The quality of the materials is great and it’s lined with an insulating material which will help keep your printer at a stable temperature which means less print fails! The size is good, I’m using a Elegoo Saturn 4 Ultra 16K and it just fits comfortably where I can open and close it without issues and still have some space for the USB drive and some space for the exhaust fan to draw in air. The plastic screen at the front of the enclosure adds another layer of UV protection to your printer which is a great bonus to prevent resin curing inside the vat. I would say it’s worth the price if you don’t have time to DIY an enclosure, definitely recommend, wish I bought the bigger one to put the wash and cure station in too

So I needed an enclosure for my Saturn 4 Ultra to help reduce the fumes and to be able to vent them outside. I purchased this unit. Positives: Once put together it feels fairly sturdy. The zips do not feel cheap and have not caught or caused any issues so far. It does help keep the fumes down. You have a limited option to vent the fumes out. The Saturn 4 Ultra fits, you can open it up while it is in the enclosure. Room for improvement: There is only one vent hole, located on the right as you look at the unit. It would have been good to have an option on each side and the back as this limits where you can put the unit if you want to vent out of a window. The Saturn 4 Ultra fits as stated above.... but only just. If you use the USB drive that came with the printer, you will find it is virtually hitting the extractor fan. I have replaced the USB drive with a micro one to help with this problem. Also if you have a heater fitted to the printer, you will need to slide the printer over to reach the heater power switch. The hole at the back for the power leads etc is just a rubber grommet and cannot be sealed so some fumes will inevitably get out. The frame is plastic. It does seem strong enough, but for the price, a metal frame would be a better option. It does the job and overall has performed well but a few simple tweaks could make this a 5 star product.

This is a great peice of kit. Comes with a hose, extraction fan and carbon filter. Never used the filter as the fan extracts the smell. The hose extends pretty well... about 4 feet in length. All fits together nicely and has covered gaps for electric leads.

This is a great item ,was Spain to put together but got there in the end. I just wish you had the option of placing the hose on either side of the cabinet. Also can someone tell me what the diameter of the plastic part that sticks out to attach the hose too

The enclosure was fairly easy to assemble, just make a note of the three axis in the instructions. It fits my Saturn 2 with loads of space left to include a small heater, I find in my very cold conservatory it helps maintain a more consistent temperature. I also run it without my printer's UV lid and have had no issues leaving resin within the enclosure for several days. Watch out for the metal core in the exhaust pipe when trying to twist it onto the mount. Overall very satisfied with functionality and build quality.

Excellent, keeps resin smells and VOCs to a minimum. Highly recommended for safe resin 3d printing at home. My partner is very sensitive to the smell of resin and this has been the only solution that she agreed worked.

Well built, fits together well, houses our Elegoo Saturn 4 Pro with space to open the lid completely. Would buy again if we had a second printer.