PC-Woody Paste Epoxy 6 Ounce

This worked well for me. Make sure you use separate applicators and mix on a tile. I kept amounts small always using separate trowel for each and mixing with a third. The tile was genius kept it cool (I was working in hot sunshine). Wear gloves and be ready to go go go ..completely sealed my very damaged window sill.

I love this putty for repairing damaged wood externally. It's so much better than standard wood filler and the how to videos you can find on YouTube are great.

Slightly too light in colour for the teak on our boat but the closest so far. And I have tried a lot. This was by far the best to work with. The color match is close when dry but it stays light and the teak goes dark when the repair stands out. But as I said by far the best I have tried by a long way.

I had some very rotten windows and a decaying front door but no interest in using highly toxic chemicals to repair them and nowhere near enough money to replace them. After much research I found this. I closely watched a four part YouTube video on how to use it best (recommended) found a UK supplier on Amazon and then set to work in the hot dry weather of earlier this year. It's worth doing the proper prep work if you want it to last but that's true of any job. I sanded off the old paint (pretty much gone anyway) removed all the most rotten wood, drilled holes into the remaining frames/door (angled down where necessary to ensure maximum absorption) and coated all the wood and drill holes very liberally in PC Woody's wood hardener, which true to description has hardly any smell. I let it cure for a few days to very hard since even a spring heat wave doesn't match Arizona desert temperatures and drying time for both hardener and filler is temperature dependent. Then I took a glob from each of the epoxy wood filler tins in a 1:1 ratio mixed well and applied. It isn't the easiest stuff to apply, especially since I was replacing so much of the wood - I had to do it in layers. I recommend wearing latex gloves or similar as it's very sticky, but also true to advertising it doesn't have to be super smooth as it sands down really well and easily when fully dried. I also tried sawing and drilling it and that works too. It smells slightly while drying but nothing to notice (less than low VOC paint). For the record if you add slightly more brown than white it's more malleable but takes longer to dry and vice versa. And don't expect it to harden as fast as it would in a very hot dry climate, but once it does it's rock solid (again I left it a few days). Although the tins look tiny they do more than you'd think. After sanding and painting the windows and doors look like new. You can't tell what's the wood and what's the filler. But it won't look like natural wood without a bit of artistry if you aren't painting it. I'm so pleased there's a non toxic solution to fixing/filling rotten wood that doesn't carry danger of death warnings all over the tin. Yes it's a lot more expensive, but what price health?

I have used Abatron WoodEpox before, and thought PC-Woody would be similar. It's not - it's MUCH harder to apply cleanly because it's so very sticky. I ended up with a very rough surface, and filler sticking to the surrounding wood. Also holes in the main body of the filler that will need a second application. No doubt it will sand down and I can use a surface filler on the holes but Abatron WoodEpox would have been quicker and easier. Never again!

Good stuff, a pleasing repair to broken door handle !

I used this to repair a wooden garden bridge that was beginning to get a bit week in places. I was cutting out old rotten wood and replacing it with new wood and PC Woody. To date the repairs have been really strong. Would recommend or perhaps WOOD recommend.

Haven't actually used it yet but has clear instructions. There was a slight delay in customs but seller was easy to contact

Got this because of how many great reviews I read on this stuff, and also because touted by some woodworking magazines. Now, it can be a bit tricky to spread as it really is sticky and gooey like thick cold peanut butter once mixed. But spreads well, you can shape it well and it is SOLID. Has endured really hot summer sun and heat, rain, snow, and is also enduring bitter cold this winter. It hardens well and really strengthens any gaps and holes. What surprised me most was how well it takes a satin. Used this on my deck to fill in some big knot holes. Was afraid that when staining my deck (dark walnut), the puttied spots would be glaringly light colored but actually not too bad. It soaks up enough stain to help blend the spots well enough. It won't soak up stain as well as wood and will stay a bit on the light side, but certainly acceptable, at least for me. All around, very satisified so far.

Good but pretty small tube.

I used this product to repair three stripped screw channels on the same hinge as part of a folding leaf on a solid wood dining table. The table was becoming unusable because of the bad joint. The product was easy to mix. Getting the mixture into the screw channels was challenging since for various reasons I couldn't flip the table face down on the floor. Therefore I was fighting gravity. However, I eventually was able to fill the holes. I waited 24 hours and drilled pilot holes into the hardened mixture. What I found is that the mixture drilled well and was also still very, very slightly malleable. This actually worked to my advantage as I was then able to put the hinge into position and twist the screws easily into the pilot holes. I then waited another 24 hours for the screws to finish hardening into place. I have been using the table daily for two weeks and the hinge seems to be holding very well. I have a usable dining table once more.

I used this product to repair a carriageway door in the New Orleans French Quarter that had a 6" diameter cavity of rotten wood. The 2 1/2" thick door was almost rotted completely through. The rotten wood was dug out with a dremel tool and the cavity was filled with PC Woody three years ago. After three years of constant use the door is still perfect. I haven't tried staining PC Woody but for priming and painting this works better than anything I've used and I still use it today for wood repairs.

This stuff worked good for filling in some holes from my door hinge. It settled quick and dried and was strong. I was able to put new screws in the door hinges and they closed without issue.