Whitestone DOME EA [Enhanced Easy Installation] Tempered Glass Screen Protector for Galaxy S24 Ultra [2Pack]

I upgraded from the S22 Ultra to the S24 Plus. The issue I had with the S22 was the curved display so finding a decent screen protector was not easy. You were basically limited to the protectors that involved glue and curing and those can get expensive especially if you mess up the installation. What I like about the new S24 lineup is the flat displays that allow you to find glass screen protectors that are cheap and will stick. I initially went with the Spigen screen protectors. They were good but during installation, I got dust under the protector and my OCD wasn't having it. Unfortunately, it happened with both installations. What I liked about the Spigen protectors was the fact that there was no cutout for the camera. This is the first thing I look for when purchasing a glass screen protector. The cutout is unnecessary and takes away from the aesthetic of the phone. After seeing YouTube reviews, I decided to give Whitestone a try. Installation was very easy and what I liked was the fact that the protector goes even farther to the edges than the Spigen while also not having a cutout for the camera. The fingerprint scanner worked with no issues but I found that this is becoming less of an issue because of the quality of the sensor that Samsung is using. The Whitestone does attract more fingerprints so you will be wiping off your phone more often. Another thing I liked about Whitestone is the warranty. Go to their website and register your screen protector. I believe they will replace the screen protectors but you have to pay for shipping which is not a big deal considering the initial cost of purchase. I highly recommend this screen protector and you will not be disappointed.

The screen protector is an amazing AR protector especially being glass. The last one that I found similar was the Benks. But installing benks was always a pain. This was easy to install and the quality is simply amazing. The screen is so smooth and had the perfect resistance. However like every other screen out there including the original phone screen the fingerprint resistance doesn't work. Good thing is that it gets cleaned up with a simple wipe. So I'll still say that's good.

UPDATE: Purchased a second screen protector as I stated before, however, the new one I received was USED, full of dust particles and scratches, was clearly a returned product. Give this fact, I can't recommend this product anymore. ------------------------------------------------------------------------ This is the absolute best AR screen protector for the S25 ultra, the AR coating is as good if not better than the AR coating in the phone screen itself, plus the oleophobic coating is the smoothest I've ever tested. I've used AR screen protectors from Benks, Blueo, Flolab, the AR coating on this is by far the most effective. I can't speak for the scratch resistance, it seems to be it's hard to get both, top notch oleophobic coating and top notch scratch resistance, since most scratches are not on the glass itself but on the coating, the thicker the coating, the more apparent the scratches are going to be. Installation is easy, just make sure you are on a dust free environment. All in all this screen protector is a keeper, so much that I'm buying 2 more just in case the get discontinued as is often the case.

The installation had no issues and unlike my previous screen protector, my phone can read my fingerprints easily now

This is a step in the best direction possible for phones.Short and simple.Bubbles:No, Feel:Great, visibility:Excellent, Durability:Basic , Privacy:No features, Fingerprint: Works and is fast. This is by far my favorite screen protector I have ever used but it's can be prone to scratches because of the AR coating(that's how it is 🤷🏻) .Its kind of oleophobic and at times it's prone to smudges but not all the time. **PLEASE INCLUDE A EASY DUST REMOVAL IN THE INSTALLATION PROCESS,THIS IS A PEAK(excellent )AR TEMPERED GLASS AND FOR THE PRICE WE NEED EASY DUST REMOVAL STEP WHERE YOU PULL THE DUST REMOVAL LAYER,ITS POSSIBLE.I would buy another if that was possible,i would highly recommend this for anybody but until that dust removal layer is added it wouldmt be worth the hassle.

Review is for s25 ultra anti reflective, easy install version. Installed in under 5 min. Perfect alignment - really like that the front camera is a hole vs a U shaped cutout. I do wish that there was the fool proof, dust free install like competitors have, but I got it installed without dust. The anti reflective coating is on par with the factory glass. This is very nice vs most other protectors. To alleviate fingerprint reader issues, always reprogram prints after a protective glass install. Usually fixes any problems. Will do a follow up in 6 months to see how this holds up

Installation of the protector was excellent with proper alignment. However, after less than a year, it is showing signs of pulling back from the edge. Considering what this cost for the S25 Ultra protector (only comes with 1 cover too), you would expect it to hold for as long as you own your phone. Note - proper cleaning was done on a brand new S25 Ultra before applying...

This shield was the easiest application I have ever experienced! The shield is already placed inside the frame guide. You just clean the face of your phone, pull off the back tabbed backing, place directly over your phone and snap the frame into place. Press down as indicated by the arrows and you are done! No bubbles, so no smoothing needed. I have not dropped my phone so as far as the quality of the shield is for protecting my cell faceplate from cracks remains to be seen.

I previously had another hybrid style screen protector but didn't like the feel, and the appearance when the screen was off. Tried this protector as I wanted a tempered glass protector. It's much better and as expected. The surface feels silky smooth and like the original glass. Also this hasn't scratched like the more expensive hybrid type and wipes clean nicely. It is also thicker than the hybrid type and gives confidence that it would protect the screen better. Despite it's thickness there's no issues with the touchscreen or in screen fingerprint scanner. I registered my fingerprints again once this was fitted and it's worked perfectly. It is more reflective but it's not been an issue. Fitting was easy and worked first time, and there's the bonus that there's 2 in the pack as well!! It's also covers the front selfie camera instead of a cut out that could be potentially misaligned and adds protection to the camera. Plus the price is excellent where others are twice the price and you only get the one protector.

Recently bought this for an S24 plus. As this is the first phone I've had in a while with a flat display I thought I'd give a screen protector a go. With a bit of research on Amazon and checking out other people's reviews I opted for the Whitestone EA Glass. I think if you're going to buy a screen protector you probably want to fit it as best you can. This was a breeze. As long as you don't show the adhesive side of the protector face up like you see on a lot of social media videos and apply it in a room that is free from dust (as best as you can) this goes on flawlessly. Having a jig is so much easier. The only downside is that i can't get the fingerprint reader to work as well but not the end of the world. As far as longevity goes we will have to see.

Es un cristal sumamente fácil de colocar ,quedando prácticamente imperceptible. Solamente te puede no ser adecuado para quien no quiera que el protector tape la cámara. Personalmente no me importa, es más , aprecio que sea entero ya que así ni se nota.El desbloqueo con huella funciona perfectamente ,grabé las huellas después de poner el protector y ni he tenido que subir la sensibilidad. Recomendable .

First, don’t make my mistake, I cleaned the screen on my s24 really well but forgot to use the sticker to remove dust. The protector went on perfectly, but there was one piece of dust I had missed so there was a bubble. I had to use the second protector and did it right this time. Erased my fingerprints and re-added them with no issue. You don’t even know the protector is on. Just go online and watch a video or two for flawless installation. Fits fine inside my j-tech case

Before that I used Ugreen glass and fingerprint didn't work correctly.