E-5 9-inch Sure Split Wedge with 1-0.875-inch Cutting Edge

Forget the diamond shaped splitters, that get jammed in the log, get one of these, they make short work of thick logs, a sharp end and plenty of area to hit, using a 4lb lump hammer. No jamming or metal chipping, a chisel made to last for years, good and solid. Not cheap, but it saves hours in chopping time and cleaning up the mess, due to good clean splits. I'd definitely recommend!

Ok I was a bit worried when I read some of reviews, some people saying it was rubbish, some saying it was brilliant. It is very good when used with the right hammer! For small logs etc you just need to hold it and hit it a with a small 4lb hammer, then if required use something bigger... But if you hit with a bigger hammer first it will just bounce off. So I used it with a axe and splitter axe and it was fantastic. It's really solid I think it will last years! So it can handle splitting little bits of wood and also the really large stuff!

Bought this to split up logs for the fire when we needed kindling. It is easy to use and shows no sign of wear despite bettering it around. It is quite heavy,but that is probably why it has lasted.

Great product - easily splits large awkward size logs

This review is for using the wedge on tree-stumps, still in the ground. I bought this as I had three fairly large Leylandii stumps to get rid of, and didn't fancy paying someone a fortune to do it. This little wonder does the job - but be warned, if you are working on stumps in the ground, good as this wedge is, you will need to put in some hard work. You will also need something suitable to drive the wedge through. I strongly recommend a proper long-handled 10lb sledgehammer. A regular carpenters hammer, or a short-handled lump-hammer are simply not going to be up to providing the heft needed to get this wedge through a tree-stump. However, if you are just splitting sawn logs, you may get away with a smaller hammer, and indeed a lighter wedge. I found the best technique is to put two saw cuts, an inch or so deep, at right-angles, to make a cross on the flat top of the stump. This is to make a 'start' for the splitting wedge. Drive the wedge down through the centre of the stump. You may reach a point where it will go no further, or is below the point where you can continue hammering it. At this point it will also not want to come back out of the stump - ie, is wedged in. At this point a decent crow-bar comes in handy. Start again on one of the other cross cuts, then repeat. You'll end up with a stump in four sections. Of course, you'll still need to get under it to cut through the roots which will be holding it into the ground, but this is a lot easier when the main stump is in four pieces. This is a very useful bit of kit. Extremely robust, it literally took a big hammering and came through without any ill effects. It is made from forged steel - which means it won't shatter or crack.

Difficult to start splitting, the spike splitter is a far better option .

Eating through some oak with ease, using only a small lump hammer, perfect!

These are a must have piece of kit for any one splitting knarled logs. I decided to buy a splitting wedge after using my Wetterling Splitting Maul to cut 16" knarled elm logs. Athough it is an excellent tool it got stuck in the log. Upon lifting the log up for another swipe the log fell off and the axe deflected into my foot! I have now got three because I split not only logs for burning but also lengths of wood for machining. The wedges have 'wings' at the top to prevent them getting stuck which work in all but the worst situations. I didn't pay a huge price for mine. It is a case of shopping around.

Funciona perfeitamente! Material durável e resistente, uso para rachar a lenha em pedaços mais finos que os que me sao fornecidos, e para partir os nacos de carvão qdo vêm muito grandes, para partir o carvão dispensa a maceta pois o peso/massa da cunha é suficiente. Vai durar para sempre!

نوعية وجودة رائعة وممتازة

A tendance à rebondir difficile à faire prendre la tête pourrait être un peu plus large . Sinon plutôt satisfait éclate bien le bois ‘.

Robusto, utile per il suo lavoro!

Ik ben bezig met grote schijven (2m diameter) essenhout te verwerken (cf tennisracket-hout). Deze wig krijgt veel reclame maar is niet zo geschikt voor deze moeilijke taak met zeer flexibel hout. De wig gaat er moeilijk in en gaat er snel terug uit. In een reeds gemaakte scheur kan het wel nuttig zijn omdat de twee vleugels het hout goed uit elkaar duwen en ze zich niet snel vastsnijdt in het hout. Het is duidelijk dat voor het moeilijke werk de aluminium wiggen met scherpe rand en anti-terugslag randen superieur zijn. Voor zacht vers hout kan deze wig wel interessant zijn. Eén voordeel van het botte uiteinde is dat deze wig makkelijker in een bestaande scheur blijft en deze open splijt. De scherpe wiggen gaan soms in een bestaande scheur insnijden waar niet nodig. Uiteindelijk is deze wig toch een nuttige aanvulling op mijn scherpe aluminium wiggen. Maar voor moeilijk hout is dit niet de wig to go in de eerste plaats.