Mercers Furniture Corona LARGE 1 Door 1 Drawer Bedside Cabinet Pot Cupboard Solid Wood Pine Wooden Mexican Style Night Stand Lamp End Side Table 67cm High. 53cm Wide. 39cm Deep.

These are lovely bedside cabinets. Look great, good size, easy to construct and will last for decades. Very pleased

Very happy with these little bedside cabinets! OK they're only pine, but their construction is very sturdy and the way they're stained they could easily be mistaken for oak - very nice, pale, neutral colour. I bought two, they come in lots of pieces (basically almost every individual piece of wood) and take a little while to put together properly (at least an hour each for one person), but as long as you're handy with a screwdriver you'll have no issues. Some of the drawer fronts can take a little tweaking to make them line up perfectly, but really not a big issue. The overall build quality is excellent and the finished product is well worth the £34 I paid and the effort to construct. There's also nothing stopping you leaving off some of the metal details (as I've done in the photo) to get a more modern appearance. I'd recommend these to anybody looking for a good value, compact sized piece of bedroom furniture.

This is a sort of review but mostly it is a couple of tips and advice that might help you put it together a little easier than the instructions advise. The cabinet is very nice once put together, it's not made from the best quality timber, it is soft, but it looks pretty good and feels sturdy once put together properly. For the price I cannot really complain about it. There are however some issues with the construction if this cabinet I'd like to share here in the hope that it might help anyone purchasing one. So here are some tips on changes and care you should make through certain stages of the instructions for putting this together. It will make life a lot easier as you progress. Also there some additional things you could do that will help as well as getting wood glue (as none is supplied) and a cordless drill with a narrow bit to drill shallow pilot holes which it does not say to do in the instructions. Also you might want to get some rough sandpaper ready and a sanding block too (though this is just a suggestion). I definitely advise that you absolutely do pre-drill shallow pilot holes for ALL screws and glue ALL dowels. SIDES & DRAWER RUNNERS: Section 1 This section misleadingly makes you think that you need parts 6, 7 and 9 for this section, you do not, you will need parts 6 & 7 for section 2 and part 9 for section 3, but I suggest you fix and glue the dowels into all of them ready for use later. I also strongly suggest getting all part 8 (x6) pieces and 12xB screws (from section 7) and do the same to those as you are better off fitting them here in section 1, than in section 7 as instructed. My reasoning? It was at stage 7 where I realised there was an issue with the order of the instructions. And it was where I learnt I should have used a drill to pre-drill shallow pilot holes for ALL the screws at the same time, not just those in stage 7. I had a really hard job in the cramped space screwing the drawer runners down whilst on section 7. If I'd had a shorter screwdriver it might have helped but the pilot holes definitely would have helped regardless. It's so cramped inside it by the time stage 7 is reached. My DeWalt cordless would not fit in there to drill the holes either and there simply is not enough room to get an arm in there to tighten the screws, it has to be done through the drawer openings etc..... So, in section 1, after hammering in the plastic lugs (J), pre-drill shallow holes through their screw holes into the sides to aid you with screwing the drawer separators on in section 3, do not drill right through, 5 mm will be fine. The instructions will tell you to put on the part 8(x8) drawer runners onto the insides of the sides in stage 7. Don't do this - put them in here, at stage 1 as otherwise, like me, you would have an awkward, if not hard job screwing them in. Make sure to use glue on the dowels as well - and pre-fill 5 mm pilot holes and screw them in really, really tight because if you don't get them completely flush to the sides when it's put together the drawers won't slide in easily or may even not go in at all. I also suggest sanding these runners and their top and bottom edges a little to aid in sliding/clearance, as even after doing it this way the top drawer on my first cabinet was still stiff to slide. FRONT DRAWER SEPARATORS Section 2 I nearly made a mistake here, all the parts 6 (x1) and 7 (x3) are identical to look at in size. But part 6 has two pre-drilled holes. I nearly put this in the wrong place - it has to go on the bottom of the number 4 pieces (not flush with the top). The holes in this piece are to screw it onto the bottom/front plinth, there are no dowels to guide you on the 3 plinth parts. SECTION 7 If you've done as above section 7 will be no longer necessary. DRAWERS Section 9 This is where the price of this unit shows. There are no dowels to guide your fitting at all in the drawers with regard to fixing them together. It is all held together by screws (24xI) so can be fiddly to get done without leaving gaps or having the sections drop below the drawer front bottom edge if you are on your own and have no vice, which is what I had to do. I suggest a vice or some helping hands to hold parts flush and tight while you pre-drill pilot holes through the guide holes that are in the sides. Line up the drawer base groove in each of the sides (one side at a time of course) with that on the drawer front, making sure that the bottom of the side also does not drop below the front bottom edge of the front. (you will probably notice here that the alignment of the groove goes out a little but there is plenty of tolerance so it will be fine). Pre-drill the pilot holes, 10-15 mm through the guide holes in the side piece and screw in. I used glue here as well. Once you slide in the hardboard base do exactly the same for the back part. The rest and sections not mentioned here are basically as is. Basically these are the things I learnt from putting the first of these units together. I bought two of these, the second one was a lot easier to do than the first by doing the above, mainly because of incorporating section 7 into section 1. And using pre-drilled pilot holes. The cabinet is sturdy, looks good, I never used the black furniture parts, I got wooden knobs for the drawers as I prefer them

This item was purchased as it would be intended as a pair. I reversed the door on one side as it was more appropriate for its placement. The cabinet was not marked for this but it was easy with the expected results. Both units went together very well. Build quality of the cabinet is very good, strong, sturdy. It is entirely natural wood with the exception of the metal fixings. This includes the back board and parts which will not be seen. The drawer is held back via dowels not metal runners at all but that can be changed if you're good enough. Building the cabinet was very simple and produced good results. It took about an hour and all screw placements are marked with the exception of the base front and sides, a clamp was useful here. Do not use a power screwdriver for the risk of ruining the tapped thread you make in the wood. Make sure you leave enough room at the bottom front for the door to open comfortably and match the sides to this fit. No warped or poorly fitting parts encountered. Overall, very pleased, a good finish, very good quality finish and would recommend to buy. Finally the supplier was more than accommodating when it came to part replacement. A knot in the top surface was poorly positioned. There was no shortage of fixings when assembling. The only disadvantage I may have found is the drawer runner but for the price not a consideration. Top stuff! My DIY skills: High, All but a few jobs tackled with ease including plumbing and electrical work. I've been helping assemble and assembling flat pack furniture for decades. It was nice to work with this as everything was real wood.

Good solid little cabinet. It was a bit tricky putting it together and this is not my first flat pack. But if you do it well and take the time, it's worth the effort. Everything fitted well, all joins are effectively screwed, so no need to use any wood glue. I only used some for the draw bottoms and the cabinet back, just for the extra support. All round, good quality, no missing parts, no damage. Well recommended.

We chose this cabinet because it is the correct height for a bedside lamp to sit on and shine down onto a book for comfortable bedtime reading. From our experience, to assemble the cabinet, you will need: A long handled screwdriver A soft hammer A flat bladed screwdriver A pencil + an average level of DIY ability. The instructions don't mention glue but really the whole thing would be a lot stronger if it were glued together during construction. We didn't follow the slightly intimidating instruction sheet, just used common sense. It took a handy chap one and a half hours to make it in a careful and leisurely fashion. We did buy two and the second one only took 45 minutes - this time a power screwdriver was very helpful, and this second time we glued it all together. Firstly he laid it all out on the floor to check through. We decided against using the enclosed round black decorative studs as we liked the look of the finished article without them. Unluckily for us, when we unpacked this bedside cabinet one small part was cracked and broken away from the piece. However we glued it together successfully; it was part of the drawer so not too important. I read from other reviewers that there wouldn't be a problem getting a replacement part but it seemed easier just to mend it there and then. It is a rough and ready item, as even after careful attention some joints just won't fit well, they gape a little. It was declared less easy to make than some Swedish flat pack furniture can be. It's not MDF though, being proper wood, dark pine, apart from the back panel, and the black metal fittings are attractive. I was happy as they perfectly matched a desk I had bought some while ago; do take a look at the image I have posted above of the two items together. Now complete and in position I am really pleased with the cabinet. I gave it a generous treatment with beeswax polish. The cabinet is heavy and solid; no reason why it shouldn't stay where it is being serviceable and attractive to look at for years to come. Even with the niggles I have described I still think it is worth 5 *s as it was so inexpensive and yet when made really looks to be worth more.

Once assembled this is a very good price for what you get but assembly is not as simple as it should be. The main issue with this as a flat pack item seems to be a lack of quality control as the item I received had several faults such as holes that had not been drilled in the right place or not drilled at all. That said if you have a drill to hand. to drill the necessary holes to finish the cabinet off it only takes about hour to put together I would say that to do a good job on this you would want to have: a Drill, A good cross head screw driver, a mallet (some parts can be forced into place) and some wood glue to make it all a little more solid. while I am critical of the flat pack system's quality the wood used on the cabinet is of surprisingly good quality given the price which means once it is together properly it looks considerably better quality than most flat pack furniture in this price range. the quality of the wood also means that it is very easy to repair any flaws in the construction.

Arrived on time and it took about one and a half hours to assemble not including the 20 minutes or so to check all parts and screws were correct before i started assembly so allow a couple of hours of DIY fun. The parts as some of the reviewers have said are not numbered but there is a bag of screws and dowels and other bits and pieces that are all clearly labelled in separate bags and they all match the instructions very well, make sure you do not tear open the bags without first laying all relevant parts down on the floor or a table with the correct letters to match the parts and if you do that you will find the instructions very straight forward. I assembled this on my own and although fiddly at times it can be done with one person quite easily i definitely didn't find the assembly as bad as some appear to have experienced with this cabinet. I wouldn't recommend the use of any power tools as the wood is very soft and there's really no need as all the screws go in pretty smooth anyway. The cabinet arrived without any dinks or factory marks perhaps i was just lucky there and does look very good once assembled but i didn't bother fitting( imho) the ugly black plastic type washers as i could see no point in them at all and the cabinet looks so much nicer without them on it. Very pleased with this for the price would buy another if needed.

Es cierto que cuesta un poco montarlas, pero las instrucciones no están mal y lo cierto es que la calidad/precio es increíble. Personalmente creo que le falta una capa de laca protectora, aunque se podrían usar así.

Ne ho acquistati 2 per una casa di campagna, mi sono piaciuti molto, danno un tocco di rustico all'ambiente, io li ho scelti per questa caratteristica, devo dire che anche i materiali sono buoni considerando il prezzo, ne ho visti alcuni allo stesso prezzo che erano poco più di cartone il montaggio non è difficile per chi ha una certa manualità, tuttavia consiglierei al produttore di migliorare le istruzioni soprattutto per quanto riguarda l'identificazione dei pezzi. Giudizio complessivo buono

la j'avoue que je suis très satisfait de ces commodes j'en ai acheté deux, facile a monter de très belle finition et produit pas très onéreux seul petit bémol le délais de réception assez long facilement 1 mois et demis mais bon c'est pas vital.

très belle table de chevet bon design la couleur pin est magnifique attention tout de même un tiroir ne rentrait pas obliger de limer le guide pour le faire rentrer mais quand très content de mon achat

La mesita es muy bonita, tal cual se ve en la foto. Todo de madera maciza de pino. El montaje no es difícil, nosotros hemos tardado unas dos horas. Se necesita un atornillador de batería, con destornilladores manuales es imposible montarlo.