Spiral Cable Wrap - 25 Ft 3/8" Spiral Wire Wrap Cord Covers Bundle Sleeve Hose for Computer Electrical Wire Organizer (3/8 Inch-25Ft)

I bought this plastic cable wrap to protect the rubber on my Tesla charger cord, which tends to get scuffed up when dragging across the ground. It works exactly as I hoped—sturdy, easy to wrap, and it stays coiled without unraveling. The material feels durable and adds a nice layer of protection. Overall, a simple but effective solution that does the job well. Definitely recommend if you want to keep your charging cable in good shape.

Just what I needed

I got 2 of these to cleanup the cabling for my KVM switch. I have 3 PCs on the KVM. each has an HDMI, a DP & a USB 3 cable. with this stuff I was able to clean up the cabling so that I have one 6' bundle, and a second bundle that breaks out a set of connectors at 6' then the second set about 3' after that. Putting it on was a bit difficult at first. you need to wind this stuff around the cables you are bundling and it tends to get twisted around the cables and it need to be straightened out periodically. I wound up putting most of it in a gallon ziplock bag that you can then twirl around the cable bundle. This made it significantly easier to install. there are also a few things to consider while your wrapping a bundle of cables. 1) make sure the ends are properly aligned on the end you start with (which should be the end where alignment matters most). once you have the bundle wrapped, i couldn't make any adjustments. 2) Make sure your cables are the right length. one of my DP cables was 6" longer that the USB & HDMI. this made it difficult to connect to the docking station it was running to. 3) I found it was easiest to wrap the cable loosely, then go back & clean up the spacing between wraps. Overall I'm very pleased with the way it turned out. the resulting bundle is a bit stiff, but there's significantly less of a rats nest behind my desk thanks to this stuff.

Decent quality, i originally bought for 3/8" Hydraulic line but this did not fit. Ended up needed 3/4" wrap for the line but that was my fault for not measuring.

works for me

As described

Not a huge fan. This seems like it could work if you're protecting cords from being chewed on. However I bought it for my blow dryer because I hate how the cord tangles on itself. I find this product to not be up to the task :/

I am using it for the CAT5 cables from my security cameras that are penetrating through the floor behind the system. I have cats and they love cables. It appears to keep them at bay.

This wrap 1/2 X 20 feet is awesome!! I bought it to bundle 3 20" guitar cords together into a sort of snake for my effects pedals, to my rack mounted equipment (preamp and amplifier) I needed 3 cables #1 marked Yellow from my APHEX Crunch Factory Optical Compressor pedal to the Rear input to my Preamp TECH 21 SANSAMP RBI. #2 cable marked BLUE from my RBI Effects Loop send to my IN On my Behringer Noise Reduction pedal and SEND from my NR pedal to my Detune pedal and OUT to my Zoom 708II pedal and Out back to the return input on my NR pedal and then Cable #3 marked GREEN in my snake goes from the OUT on the NR pedal back to my RBI return effects loop. I was trying to figure out a neat and tidy way to organize all there cables and I think that this is going to be great. I left enough cable at the pedal end, so that I can change my pedals around, if I want to. At the rack end I left enough cable so that only the individual cables will be supported by the jack pots and not a heavy snake with multiple cables. I can just drop the snake behind my amp and pull whatever cable I do not need behind my amp and then loop it back and drop the end on the floor, and plug in the individual cables. I will post a picture of the back of my amp once I get it all connected. This wrap helped to manage these cables in a tidy and professional manor I have gone over the wrap to try and adjust the spacing and tension, a bit. I am planning to tape the ends of the wrap with electrical tape to secure them, once I go over it one more time for spacing and tension. It was quite easy to install other than it getting a bit wound up from going around the cable over and over again. I found it the easiest to leave most of the wrap in the plastic bag and put a couple of the cable Velcro straps around the bag to limit the amount of wrap I had to wind around the Cables. I would feed out about a foot at a time from the bag twisting the bag one turn for every wind to try and keep the wrap from getting twisted. Just take your time and try and get it on as evenly as you can. I cut off about 18" at the end so I would have about 4.5 Feet of free cables at the end. For my usage and about 18" on the pedal end free cable. CHEERS!! ROCK ON!!! covers about 15' with 3 guitar cables.

Por el precio está bien, no se puede pedir más. Si tus necesidades no son muy exigentes te lo recomiendo.