Vgate iCar Pro(BT3.0/ BLE4.0) OBD2 Scanner Code Reader Diagnostic Scan Tool

This OBD2 scanner is great. It's helped me diagnose problems. It's also saved me money, I can turn on and off certain features. Like fog lamps, which I added factory ones. I don't have to pay the outrageous fees to the stealership.

Using it with JSCAN. Works great. Connects easily. Has saved me tones of money diagnosing my vehicle problems.

Worked great for reprogramming the tcm after regearing my Jeep.

This little miracle saved my eyes and my wallet. My Jeep had the flashing sway bar dash light on that affects Rubicons with the stupid electronic sway bar nonsense. The mechanic said, tough luck, $1800 minimum, Jeep said the same thing. I stumbled across a Jeep forum that recommended this and the JScan app. I bought the $20 app license and this little buddy and 10 minutes later, I was able to disable the sway bar light, change the tpms sensor settings and it even fixed an evap leak code that is also very common on JK’s. I had to reset that code a few times but it turned off after the 3rd or 4th attempt. Easy to connect, good signal, highly recommend.

Jeep. Tire pressure monitors TPMS do NOT go together. Off roading or even potholes break sensors. Easily changed by removing all your tires remounting and rebalancing…. Right. This allowed me to shut it off forever. You need the APP and a subscription per VIN number of about 21$ worth it since the off-road shop wanted 200$ to turn off the light. ( not repair it, to disable it!!!)

I used this to read and potentially clear codes with the Car Scan app on my iPad. It connected easily and read all the codes. However, I discovered that there are codes that only the dealer can clear, so it cleared most of my codes, but left a couple others. The booklet that came with the reader mentions this fact, so be aware that it may or may not be able to clear your specific codes. I also discovered that the reader will work with the Bimmercode app, which I own. Good value for the money!

Easy to use, fast. Detailed scanning of car. Highly recommended if you don't want to spend $$$

A slight step up off my old ELM327 counterfeit clone that just used regular Bluetooth. I can see sensor changes faster. One issue I have with this is sometimes I have to re-pair it with my Bluetooth to work, something my 10 clone didn't have to do. Besides that it works well. 2016 Honda Accord Sport

I picked up this Vgate iCar Pro OBD2 fault code scanner, and it has been an incredibly handy tool to have out in the garage. When you do your own vehicle maintenance, having a reliable diagnostic scanner is essential for figuring out exactly what is going on under the hood before you start turning wrenches. It plugged right into the port and connected seamlessly to my Pixel 10 Pro XL via Bluetooth without any hassle. It reads and clears codes quickly, saving a lot of time and unnecessary trips to the mechanic. If you need a compact, dependable scanner to help diagnose vehicle issues yourself, this is a highly recommended pickup.

Took a bit to get it working as the instructions were not 100% accurate - the "link" used to connect via iOS was different than the instructions stated but it did connect and work as intended. I used this device to deactivate the DRLs on my 2012 Jeep Wrangler. Previous owner hacked in a set of cheap LED's and they burnt out leaving me with no factory assembly to install. Reviews said lights would flicker because Jeep uses "odd" voltage / pulsing to run DRLs so I hard wired the DRLs to a acc switched fuse and shut the DRLs off so they didn't send odd voltages to the low beams. Worked as intended - lights are doing exactly what I want them to do now. Have not tried anything else as the outside temps are -25c and colder so may play more in spring / summer.

Excellent module Wi-Fi OBD transmitter

This product is the perfect plug and play product. I installed it in my 2015 Ram 3500 pickup and it synced with the truck right away. I did have to purchase a vehicle pin to make it work for programing key fobs. I like that it now monitors the truck if I want or it can be left off if desired if you are not driving your truck for long periods of time. I definitely recommend this product.

If you want to save a lot of money, never ask a dealership because basic program adjustments will cost you a fortune. If you want to go to a service centre, This little OBD2 scanner can accomplish all you need. Most of the vehicle's functions are deactivated by the dealership, such as DRL, but this little guy can simply do it for you. All you need is the bypass cable for only $20 and you can do anything that only a professional can accomplish.