Vertical Heat Pressing Machine,Heat Set Insert Tool,Brass Inserts 3D Printing,Heat Set Insert tip for Thread Knurled Nut M2/M3/M4/M5/M6(1/4)/M8

Works wonderfully, assembly was a little confusing. The steps are listed on the store page and come printed in the box, take note that they look like 1,2,3 6,5,4 This threw me a bit. It also came with an extra M5/Tnut which I was confused on what step I missed. Otherwise, this seems like a well machined piece of equipment, and I believe it'll last a long time. The included iron heats up incredibly quickly and has temperature control that my other soldering irons don't - helps to create as little smoke as possible. It's super easy to get straight presses now, in a consistent manner. I was able to press several in a row without tons of re-heat time in between. It's light, but also has some weight which makes pressing a breeze. It comes with the tools you need to assemble as well, so it's a full kit. The best part is that it also includes the heat insert tips! If I had realized, I could've saved some money on a different set I bought. However, the tips I bought fit this iron as well, so I'm not out anything. Finally, it came with a plastic cap piece that's not in the instructions; it goes on top of the vertical tower to cover the exposed aluminum and give it a finished look. Great price, great tool. Would definitely recommend and would buy again if needed.

This vertical heat‑set insert tool has been a solid addition to my 3D‑printing setup. It heats quickly, holds temperature well, and makes it easy to install threaded inserts into PLA and PETG without warping the part. The vertical alignment helps a lot — inserts go in straight and seat evenly, which is a noticeable improvement over using a handheld soldering iron. The build feels sturdy and the motion is controlled enough to get consistent results. It does take up more space than a simple iron, but the accuracy you get in return is worth it if you do functional prints. After using it across several projects, the inserts have held tight and the tool has stayed reliable. If you want cleaner, more precise insert installation, this is a very dependable option.

This does a great job of setting heat-set inserts into our 3D prints. Overall assembly was straight forward. It is not as rigid as I would prefer but that said, it is rigid enough. There is a slight deflection has you push down, causing a very slight loss of perpendicularity. It is not enough to cause a bad insertion, but I would have preferred it to remain square. Understand that for the money, this is still more than worth the cost. The iron works great and heats up quickly. This is a great addition to your 3D printing setup if you are making functional parts that require real metal threads.

I was blown away by the quality of this 3DZWMAN Vertical Heat Pressing Machine! The build feels solid and durable, and it performs with precision every time. I’ve used it for a variety of brass inserts (M2 through M8), and the heat set process is smooth and consistent across the board. You definitely get more than your money’s worth with this set — it includes everything you need and then some. The range of tips and inserts makes it super versatile for different 3D printing projects. Setup was simple, and it heats quickly without overheating. If you do any amount of 3D printing and want clean, reliable threaded inserts, this is a must-have tool. Highly recommend!

The rig is easy to set up. Works well. Cool ability to add threaded inserts to 3D printed parts. Price point is very reasonable.

I was somewhat unsure about ordering this item because of mixed reviews. Don’t be. Buy with confidence. This thing is very well built and designed. The comments about it fitting loosely are simply because they didn’t assemble it correctly. The instructions are not the greatest but are far from the worst. I will offer some advice on putting it together. There are three rollers on the carriage. The roller on the side by itself adjusts to make it tighter or looser on the rail. Behind the roller is a hex nut that is not present on the other two. The hole for the bolt to go through this nut is purposely off center and the nut has a flange that keeps the nut itself centered on the rail. Rotating this nut tightens and loosens the fit on the carriage. Very clever design. Tighten the carriage first before mounting the soldering iron. When the bolts on the iron are loose there is side to side play and you could windup tightening it out of square. Lower the assembly until the tip of the iron is close to the bed. Use something square like a credit card to align the iron perpendicular to the bed and tighten the bolts attaching the iron. My iron is perfectly square and has zero wobble. This unit far exceeded my expectations. Frankly it is one of the best made products I have bought off Amazon.

Works pretty well. But I got the one with 210mm capacity and often enough that is not enough for me. If I had gotten the 400mm one it would be harder to stow away. Will print an offset adapter that raises the iron so that the tip is a bit higher and that will keep the smaller size and give me more range. Overall good product

I'm putting together a Voron 2.4, which seems to require a gazillion heat inserts. I bought this to make my life easier, and ensure the heat set inserts go in straight. For the most part, this has worked well and been a timesaver, but there was some tweaking involved. Easiest way is to do this as pros and cons: Pros: - Easy to put together. - Wheels on 2040 extrusion work well once you tighten up the eccentric nuts correctly. I'm familiar with this already on my old CR-10S. - I like that you can easily adjust the height of the spring. Some parts are short, some are tall. I find that pulling against the spring makes it challenging to do the short pieces, so I like that I can adjust that spring location with one thumb screw and move it down to reduce the spring tension for the shorter parts. - Soldering iron works okay. No, it's not awesome, but for heat inserts it works just fine. I had to go about 10C hotter than I did on my main soldering iron (I'm running it at 250C for inserts into ABS, could probably go a little hotter). - I've had no issues with the soldering iron coming out of the holder. It seems solidly in there. Cons (reason for 4-star review): - "Verticalness" (squareness) of the soldering iron itself. The physical components (e.g. base and extrusions) are square. However, the soldering clamp is a bit iffy, as the clamps hold the iron on the rubber area instead of something that is solid and square. After building it, I eyeballed the iron with a machinist square. The iron was square in one direction (across the bed plate) but off a few degrees in the other (looking towards the vertical 2040 extrusion). I shoved some wire as a "shim" on one side of the mount to make it more vertical and not angled. Still not perfect, but good enough. - Although the included heat set insert tips do work, I found them to be a little tight in the inner portion of the heat set insert. I preferred my old heat insert tips, as those have a little more tolerances and aren't as tight in the heat set. Frankly, this is probably just personal preference. Overall, I'm happy with it and have been successfully using it for my build. It is nice to not have to worry about keeping a soldering iron straight and steady in your hands to ensure a straight heat insert. Just make sure the iron is actually vertical before you start with those gazillion heat inserts.....

高さが280ミリの表記はありますが、スプリングの長さ分、加工出来る物の高さに注意が必要でした。高さ90ミリ程が加工高さの限界です。スプリングの全長を短い物に交換するか、10ミリ幅の輪ゴムに変更し長さ調整すれば、高さ130ミリくらいまで加工出来そうです。デジタルハンダごては、設定温度に素早く上がるため大変便利です。耐久性が心配です。製品本体は精度も良く組み立ても簡単でした。

Einwandfreies Produkt, funktioniert hervorragend, super geeignet für die Verschmelzung zwischen Gewindehülse und dem gedruckten Teil.

Nos gusto mucho su funcionamiento facil y preciso, para colocar insertos, nosostros colocamos al rededor de 300 insertos en una tarde, habia veces que quedaban chuecos, con esta herramienta, hacemos que todos queden derechos, terminamos comprando 2 herramientas de estas. A parte estan robustas.

As not been used yet. It will soon. Firts look, fine thing. Son happy. Hopefully, it will work great fornits purpose.

Que c'est pratique !! Un bon moyen de mettre des inserts proprement ! Le mieux est de s'entraîner un peu avant.