VEVOR Electric Honey Extractor, 4/8 Frame Stainless Steel Beekeeping Extraction, Honeycomb Drum Spinner with Transparent Lid, Apiary Centrifuge Equipment with Height Adjustable Stand

Decided to a spend little more and get an electric extractor instead of a hand crank. Haven’t tried it with frames full of honey in them yet. Tested it out with empty wood frames with plastic foundation and 21st bee frames. Both super and deep frames. Spun with no problems and seems like it will work well during extraction. Only adjustment I had to make was one of the metal pieces on the lid that hits the switch to let it know the lid is open or closed. It was pushing in too much not letting it spin and also not letting the lid sit completely flush. Just loosened the screw on the metal piece attached to the lid. Pushed the piece in, then tightened while holding it in place. Lowered lid back down. It sat flush and made proper contact with the switch for the motor to run. Definitely recommend it for anyone else getting started and don’t mind spending a few dollars more to not have to crank a handle. Which means instead of standing there turning a handle you can do something else like decapping the next batch of frames to go in.

The good... easy assembly, but you'll need a #2 Phillips head a 14mm box wrench or socket and small crescent wrench, heavy duty construction sturdy legs. Quiet, adjustable speed and clear lid. The bad... there are some sharp edges and O got a couple of small nicks on two fingers while unpacking. The worst is that there are no side handles. It really needs handles and I'll add them to move it around. The ugly...it unpacked with a fist sized dent in the bottom but despite the heavy construction zi gave it a decent thump from the inside with a rubber mallet and no harm done. Overall very nice for the price. I got it on sale for $160 but probably worth full price too and so much easier than my manual extractor!

Great extractor for the price. Easy to put together and operate. Was very surprised by how quiet it was. In summary here are pros and cons. Pros Good price, works well, easy to use and put together. Disassembly is easy but you do need a tool to loosen the mounting nuts. Cons Slight defect on one of the hinges for the lid. So that side has a small gap, no biggie. Slightly awkward to put med frames in the perpendicular slots, but they do fit. Disassembly is easy but assembly can be a bit fiddely due to the arms that attach to the motor/ central bar not being rigid. They basically flop around and it’s fiddely to align them again. Also no biggie. Lastly the hole for honey gate is a little high up the side of the drum so you need to tip the extractor quite a lot to get the last couple gallons out and if you tip it a 5 gallon bucket no longer fits underneath. I set it up on the longest leg setting as well so this is the main reason I didn’t give it 5 stars. Luckily I’m strong enough to have no issues picking it up and putting it at an angle on top of the bucket to drain the last bit. The extractor seems well made but is not overly heavy which helps. FYI don’t tighten the main 4 nuts on the motor/ central bar too much, I think you could bend it out of shape if you are not careful. I basically used a socket by hand to tighten so there was no play. That was good enough.

My husband is new to the bee world but wanted something to help get the honey out and this extractor worked great. He has used it once and did not complain about any part of it. I'd say that's a win for me!

This item is junk! This was our first time using this honey extractor and I was excited because we have always used a hand crank extractor. We were extracting our honey and after completing 5 frames of honey we turned it off so we could put more honey supers in to extract and when I went to turn it on nothing happened. Tried unplugging, closing lids tighter, checked the outlet to see if it blew the GFI and it still didn't worked moved the extractor to different outlets and tried again. Still nothing! Contacted Vevor and they wanted a video showing it did not work. So we did that and then they wanted (on video) for us to take the electrical box apart to see if there were any loose wires...did that! Then we were told to take the covers off and squeeze the connectors by hand. We did that. Then they responded by sending us an operation video and it was in Chinese and we could not understand any of it. We responded by telling them we had purchased this item in good faith and we expected them to honor the warranty and we wanted a full refund since this was clearly a product fail. We were told we would have to pay for the shipping to return it or we could keep the piece of junk and they would refund $90.00 of a $260.00. Vevor does not stand behind their products and clearly sell junk! DO NOT BUY THIS JUNK EQUIPMENT!!!

I was pleasantly surprised how easy this was to put together and use. At first I thought the motor might be too small for the job, but it spun out all the honey on an 85° day. And hallelujah, I don’t have to hand crank as this replaces an ancient hand crank one that was owned by my parents. I’m also happy with the small size and legs as I can easily move it around. Other reviews mention that it vibrates or wobbles, but I found that if you pay attention to the weight of the frames and put comparable weights opposite each other that it remains stable. Also starting slow and and working up to full speed also kept it stable. Overall for me it’s a good investment for the few hives I have.

If you’re a hobby or somewhat small scale beekeeper, I highly recommend this! Granted, I don’t know what’s considered small scale. Ha! I bought this after seeing a Beek on YT do a video review and I’m so glad I did! This was perfect and made extraction so much faster! Forget cranking a handle by hand when you can get this electric extractor! We did 10 deep frames and a week later our friends came over to extract 11 mediums! I’ve told numerous people about the extractor and sent the link via text. It’s easy to put together, operate and clean along with being shockingly quiet. Perfect!

This was our first year extracting honey from our bee hives, and we are glad we chose this extractor. It is quite and does a great job releasing honey from the frames. There are some tiny screws involved in the assembly, but nothing to take away from this product. We can place four frames at a time into the extractor. I will be building a simple wooden stand to hold it in place during use. There should be no surprise that a rotating tub will "walk", but the movement was minimal. It was easy to assemble, and the instructions were surprisingly clear and easy to understand. A simple rinse and the tub is clean and ready for another season.

Schweze Ramen passen nicht sonst habe nicht probiert

Die Schleuder hat jetzt zwei Honigernten hinter sich und die mit Bravour gemeistert. Wenn man ein bisschen auf das Gewicht der Waben achtet äußerst laufruhig. Ich vermisse eigentlich nur einen Linkslauf, das wäre manchmal schon praktisch. Zur Reinigung leicht zerlegbar. Insgesamt ein tolles Gerät mit super Preis/Leistungsverhältnis.

Ich habe sie bestellt aber nie benutzt

Imballato bene e pare che funziona ma ancora non lo uso per smielare. Manca il rubinetto e le viti per montare i piedi.

No me gusto las revoluciones que tiene asi la miel no sale correctamente a no ser que el operculo no este cerrado y pueden probar ustedes haber si no. Es correcto lo que digo