AirGearPro M-500 Reusable Respirator Mask with A1P2 Filters Anti-Dust Gas mask Ideal for Spray painting, Sanding, construction, Chemical, DIY

Excellent bit of kit. Use on a daily basis with my wood lath. Stops all the harmful particles. And very comfortable and does not effect glasses wouldn't be without mine. The Weight is acceptable for long period of time. Even with a visor on.

Filters really good. Great value.

Good mask but is difficult to seal on face with a beard and big nose but i managed to get it to seal in the end and it worked well.

I have used a simple paper mask to spray a large field in recent years and often found I had a slight taste of the chemical in my mouth afterwards. I realized I need something better and after reading reviews I opted for this mask/respirator. Does it work? Undoubtedly that's a yes. I have sprayed in conditions I wouldn't have normally with the paper mask and it is clear now that I am not inhaling any vapour or particles. I will be using it for painting in closed spaces and some other jobs I do as well from now on. The fit: this is going to be a very specific to an individual's face and what they find comfortable. The materials used in the mask part, which I believe are silicon based a very comfortable on the face. With the straps and the design I find it very comfortable myself. If you have a large face maybe a slightly bigger nose than average then you may begin to notice some discomfort but this is pure speculation on my behalf. It is easy to use and also easy to clean down after using to wipe off any overspray and wipe out inside the mask. It's easy to assemble and disassemble and replace parts to which is a bonus. The comfort really will be down to the individual themselves but in terms of providing safety and peace of mind I cannot fault this respirator It is one of those things you wish you had bought years ago when doing jobs but I never imagined I could get something as effective as this for this price

I’m very impressed, easy enough to put together and comes with 2 sets of filters. Head straps are very comfortable and easily adjusted. I was very impressed with the breathing ability, it doesn’t feel like I’m going to suffocate and is comfortable to wear, seal seems good without having to be too tight, must be good as my glasses don’t steam up. Highly recommend

Brill mask! So comfy to were the extra filters are a nice bonus! Can wear with glasses that was a worry of mine, has not caused any issues with my glasses at all! No steaming up!!!!! Fully adjustable straps!

Good price fast delivery good fit works extremely well no fumes when using thinners and when painting Comes with spare pre filters and clips Highly recommend

I use a lot of PPE in my day job. This product i bought for home use. Its well put together easy to fit and adjust. The valve works great and doesn't labour your breathing. I didn't have any issue using the respirator together with safety spectacles.

Masque bien protecteur,j'ai eu la qualité voulu.👍

Fonctionne bien, bien faite, facile à porter

Works well and seems to be decent quality. It’s a good buy.

È una maschera veramente molto utile e protettiva, specialmente se si fanno dei lavori dove si rischia di respirare un sacco di polvere, o micro particelle dannose alla nostra salute. Hanno anche due filtri di ricambio, e con questa maschera addosso non si respira nulla di nocivo. Io la uso quando devo levigare il legno o la resina e anche quando devo verniciare, e posso assicuratere che non sento nessun fastidio o dolore al fine lavoro.

Die AirGearPro M-500 Atemschutzmaske mit A1P2 Filter hat für mich einen riesigen Unterschied gemacht, gerade bei Arbeiten mit viel Staub, Spänen oder generell allem, was normalerweise später im Hals und in der Nase landet. Und genau da liefert die Maske richtig ab. Es kommt gefühlt wirklich nichts durch. Kein Staub im Hals, keine Späne in der Nase und endlich dieses angenehme Gefühl nach der Arbeit, nicht zu klingen, als hätte man versehentlich einen halben Baum eingeatmet. Gerade bei längeren Arbeiten merkt man schnell, wie angenehm das tatsächlich ist. Früher hatte ich danach oft Halskratzen oder dieses nervige Gefühl, dass irgendwo noch „Baustellenreste“ in der Nase wohnen. Mit der Maske ist das bei mir komplett verschwunden. Die Verarbeitung wirkt ordentlich und die Maske sitzt insgesamt angenehm und sicher. Auch das Atmen funktioniert überraschend gut dafür, dass hier ordentlich gefiltert wird. Den einzigen kleinen Nachteil, den man natürlich merkt: Darunter wird es warm. Man schwitzt schon etwas mehr, besonders bei längerer Nutzung oder körperlicher Arbeit. Aber ganz ehrlich, das ist bei einer dicht sitzenden Atemschutzmaske auch einfach logisch und für mich absolut kein Grund für Punktabzug. Lieber ein bisschen schwitzen als später Holzstaub bis nächste Woche im Gesicht spazieren tragen. Mein Fazit: Die AirGearPro M-500 macht genau das, was sie soll und das richtig gut. Endlich saubere Luft beim Arbeiten und deutlich angenehmeres Gefühl danach. 5 von 5 Sternen, weil Schutz und Komfort hier wirklich überzeugend sind. 😷🪵