Orzero (12 in 1) Compatible for Samsung Galaxy Z Flip 3 5G, 3 Pack Soft EPU Protector + 3 Pack Front Screen Protector, Premium Soft EPU (Not Tempered Glass) High-Definition Anti-Scratch Bubble Free-Transparent-6.7 Inch

The first screen protector I got was only one and I messed up, bubbles everywhere and it didn't last eventually cracking at the fold in about a month. I ordered this set of 3 and actually watched the video on how to install it and still messed up the first one but the 2nd one went great. I still have one left for the front screen and 2 for the back and paid about the same as for just one set before. I went to Verizon and they wanted to charge me $65 to put one on and I decided to give it another shot and glad I did. One secret she told me is that you don't fold your phone for 24 hours after installing the front screen. So I am waiting to do the back until I can fold the phone. It all looks great and no bubbles. Very happy so far.

We have Galaxy Z flip 3 5G phones. Almost at the same time the factory installed inner screen protectors started to delaminate in the center where the phone folds. Of course, it was after the warrantee expired. I was very hesitant to remove the screen protector myself but after viewing a couple of videos, I felt confident I could remove the screen protector. I was not about to send in my and my husband's phone for 3 to 5 days to get a new one. The old protectors removed easily without damaging the foldable screen.Viewed videos on the procedure for installing the new one and it went very slick. I had a mat for keeping the phone stable and did not need the included pads. I would advise watching the company video and maybe more on You tube on installation, if you are unsure.I washed the screen two times and used the dust remover even though I didn't see any dust or other junk. Make sure you check the numbers on the tabs when you install. Numbers for steps 2 and 3 are on transparent film and hard to see in dim light. I just went really slow and had almost no bubbles. the squeegee pushed the few small ones out. the center where the phone folds is perfect like when I first got the phone. It took me 20 minutes to remove and reinstall the new ones on two flip phones.

It comes with instructions which has tiny and abbreviated descriptions. The website has video instructions which is helpful but not very complete. The product has more stickers for use but no instructions on what to do with them. No matter how I tried, there were still some tiny bubbles and application defects when I applied the screen protector. I am glad that it comes with 3 screens available for doing it over. Still, it is worth my money when comparing to cheaper items (BTW another cheaper product appears to use the same material as this one, but with only 1 screen included).

This screen protector was great at 1st. Installs pretty easy when you follow the directions and adheres very well. But it didn't hold up well. I never expect a soft cover to last but my thought was if I replace it every 6 months, the 3 pc set would last about 18 months or longer. Unfortunately, this wasn't the case. It spouts an indestructible protector but after only 3 months almost to the day since I installed it, it started splitting at the fold. I replaced it today. So looks like I will only get about 9 months use out of the 3 pack. I will say it sticks better than any soft cover I have tried and only started coming up at the fold after the split started. Otherwise it is a good screen protector. But since this was designed for the Z Flip 3 phone, I would have thought it would have lasted longer. FYI... the split looks longer as it tore even more at removal. It was only about 1/4 inch long at the time of removal. Had it not started peeling at the split I would have left it longer before replacement. But the lifting from the screen was creating operational issue with the screen swipes so it had to be replaced with the 2nd one.

Maybe the negative reviews are from before it said "upgraded version?" I have a Z flip 3 and I highly recommend this. I've gotten so many screen protectors over the years for various phones, both film and glass ones, and this is the only one I applied to my screen without a single air bubble or blemish. I was stunned. It's due to the installation process, which isn't difficult but it's different. It comes with installation instructions and has a video on this page. I got it on the first shot. It's TPU film which is recommended for the z flip because it stretches with the crease. It's film, mind you, NOT glass. It offers the same protection any other film protector would. As far as the fit, there's a 1/16 inch gap between the film and the edge. Any other film protector I've applied had that. It's a perfect fit for the Z flip 3. I didn't think the outside protectors looked as great as the inside until day 2. There is a line up the center of the outside protector due to the way it's installed but it's not always noticeable and doesn't bother me. I would recommend definitely getting this for your inside screen and if you don't like the outside ones purchase another protector specifically for the outside. For $16 on amazon and the fact that you get 3 of everything, definitely worth it!

Really annoying to install. I tried twice and no matter how gentle or careful you are, it leaves a crease where the films separate at the to actually stick to the screen. The front screen cover (when the phone is closed) doesn't form around the edges and pulled up the factory screen protector when I tried again. 😑 I was able to avoid bubbles, but there are what look like perfectly straight scratch marks running the length. The fold/spine protector is useless and doesn't stick to the curve of the phone at all. When I opened the phone it just peeled right off. HORRIBLE product.**edit. This happened twice, I had my phone in my pocket on a cold day and the cold made the screen protector brittle and bubble at the fold crease. When it warmed back up inside it was warped and had tons of bubbles I couldn't get rid of. If I could give this negative stars, I would.

After doing a lot of reading and research about whether it was a good idea to try to replace a screen protector on the Samsung Galaxy zFlip 3 ourselves, we decided to go ahead and tackle the job using this Orzero protector. My advice for anyone wanting to use this product is to watch a bunch of short install videos that are available on YouTube for this type of protector (doesn't even have to be the same brand of protector, just one that is meant for the zflip.) The process for installing the protector is not rocket science, but you do have to follow the instructions, including thoroughly cleaning and de-linting the phone screen before starting. The screen protector itself is marked with numbered tabs and you simply align the protector over the screen and then use the provided squeegee to peel back each numbered tab one at a time. I won't say it isn't daunting, but if you take the time to watch some videos and familiarize yourself with the general process, it will be fine. This was 100% worth not having to send the phone back to Samsung for a 2-4 week repair. I am very pleased with this screen protector.

Fácil de instalar, la pantalla se ve perfecto y él precio por la cantidad de piezas es increíble.

Nach ca.1 Jahr hat sich die Folie in der Mitte gelöst, ist wohl ein bekanntes Problem. Habe jetzt die Folie bestellt, die alte abgemacht und die neue Folie drauf gemacht, hat alles super geklappt.

Tienes que ver video en youtube para entender qué dice las instrucciones. Pero es fácil de aplicar. Tengo 3 semanas con el y ha ido perfecto. Aparte viene con 3 protectores.

ممتاز

Protege écran facile à mettre ,j'ai réussi du premier coup . A mon avis il ne tiendra pas aussi longtemps que la protection d'origine mais franchement pour le prix ! Je préfère le faire moi-même que de payer la somme que Samsung me demande !La boite est complète avec tout le nécessaire pour nettoyer avant d'appliquer le film . Génial ! Je ne regrette pas mon achat ! Je suis plus que satisfaite de ce produit .

Onduidelijk hoe je moet aanbrengen, blijven bubbels zitten 3x geprobeerd alle 3 niet 1x gelukt rare lijn ergens boven aan waarvan je denkt dat die in de vouw van het scherm hoort maar zit daar niet.NIET KOPEN