HH-66 Toluene Free Vinyl Cement, 118 ml can - RH Adhesives

This specialist glue is excellent for bonding vinyl for a permanent fix.Because it soon dries,if using on a large area,it is best to bond small sections at a time

Strong bond.

Great bit of kit for little money does the job

Used this HH-66 vinyl cement for some patch repairs on inflatables and tarps, and it’s fantastic. Bonds really quickly and holds tight, even under stress and water exposure. Being toluene-free it’s a bit less harsh on the nose too, which is a bonus when you’re working in smaller spaces. Only tip is make sure the surfaces are clean and dry before applying for the best bond. Absolute must-have if you work with vinyl or heavy-duty materials.

Strong bond for vinyl. I ordered twice as it is the best I found around.

Glued my paddle board with this & first time I had the pvc misaligned, I couldn't part this glue once it had dried, started ripping the material. Fantastic glue.

Very strong - doing the job. Eye watering price though

Used this glue to add and camera mount, 4 hoops and a handle to my SUP - just the job.

Cette colle a été utilisé pour coller des d-rings sur paddle collage rapide reste à tester si cela tient et le petit pot n’est pas bien grand 😂😂😂

I came across this HH-66 Toluene Free Vinyl Cement, in the 4 oz. can. After doing extensive research online for my specific project. I purchased a used, but in excellent condition, full size, tonneau cover for my F150. I have a tool box in the rear and I wanted to cover the exposed bed. The tonneau cover had a length of 72" and i had to shorten it down to 45". As a handyman by trade and an RC hobbyists at heart. I took the tonneau frame apart and put it back together, almost achieving a factory finnish. 1. I performed a small test on two strips of vinyl. I didn't clean them (intentionally) because I wanted to test the cement on unclean surfaces to check the level of adherence. The cement bonded phenomenally! 2. Prep your surfaces/wipe both sides with alcohol before applying the cement. 3. Please note: The cement dries as you brush it on, if possible, I suggest working on small manageable sections like 5" to 10" sections at a time, brush on quickly. Once a desired section is complete, move on to the next piece immediately! "Do not waite to bond the pieces together after brushing the cement on them. Once the 2nd strip is covered in the cement start bonding the ends together so they don't dry-up on you in the process....if they dry, your going to be left with a weak/ poor bond, the ends may lift or you will end up with air bubbles trapped between the vinyl 4. Wetter is better! You need both sides to be tacky wet, not tacky dry. I can't stress this enough 5. Press and hold for a few minutes, I used duct tape, blue painters tape and a variety of different size binder clips for my application and it worked great, get creative 6. Take your time, my specific project took roughly 3 days. I worked on it mornings and late evenings. I wanted to finnish my project but I wasn't in a rush and it turned out great! 7. The smell wasn't overwhelming for me, (I have worked with an array of chemicals) but if your sensitive to smells, yeah, it's best if you work outdoors, a garage, a shed, or a porch or just crack open a window. 8. My seams bonded extremely well, tight, no water leaks, no issues, no lifted ends. 9. Clean up is a snap! If you don't have thinner just use your 91% rubbing alcohol on a rag and wipe everything clean, it will break down the cement the same way. If you made it this far, I hope the small details described in my review will help you during your next project (s) i would use this on flexible thick vinyl products, not the cheap flimsy stuff. Preferably on tonneau covers, pool covers, air mattresses, vinyl tarp repairs, etc. Just to name a few. Also, if you intend to use this cement on PVC pipes, don't! Just go to your big box store, they sell a kit specifically designed for PVC pipes. Reminder: Always try a test piece first, before moving forward. This way you will be able to move forward confidently. Take care all, just a handymans honest perspective.

Ho usato questa colla per riparare il mio SUP. Super resistente, facile da stendere e soprattutto fa ciò che promette.

ok

Perfect adherence to our paddle board. No leaks since we used this for the repair and the board had a pretty significant tear. Used in conjunction with these patches. https://www.amazon.com/dp/B08B61JNV9?ref=ppx_yo2ov_dt_b_fed_asin_title