Hard Case for 13 inch Microsoft Surface Pro 12th (2026)/11th/10/9 | Shockproof Folio Rugged Cover with Clear Transparent Back Shell Compatible with Type Cover Keyboard, Blue

The item fit correctly, gave it a more distinctive look, and guaranteed protection.

I have four surface devices, a Go 2 Tablet, a Surface Pro 7+ LTE, a Surface Pro 9, and a Surface Book 3 all with cases. I bought a lot of the rubber Moko cases but they all break at the bottom within a year where the hard plastic holds the bottom. This case is superior to every case I have had for my Surface Tablets. It weighs a bit more but there is no weak spot on the case bottom to break AFAIK so far, a year in. Update after a year: I bought another Surface Pro 10, i7ULtra 16GB and 5G, platinum color this time, to upgrade from the Blue Surface Pro 9 intel i7 and no 5G I have had protected in it for a year. I made the mistake of ordering another brand. When the other brand case came in, I tried it right away. I am right handed so I hold it in my left hand and that case rolled off the tablet when I held it on the left side. I realized that day when I tried it that it needed to be returned and I needed another Fintie. I got my return approved and Immediately ordered another Fintie case. My old Pro 9 was blue and I had bought a black case. This time I ordered the blue case and put the new case on my the Pro 9 I am replacing. When I took the black case off the Pro 9 it was like new, not the usual scuffing some cases make on the Surface Pro finishes. So now the Blue Pro 9 is in a perfectly matched blue Fintie case. I put my new Pro 10 platinum color in the old black Fintie case and it looks much better than the blue one did in it. Sure it has some hairline use scratches but so little they can't be seen except in the light at a certain angle. The clear plastic doesn't show scratches like opaque colored plastic See the pics of the new Pro 10 in the 1 year old hard daily use black case that cleaned up like new with soap and water on the outside surfaces. The inside was like the tablet, scratch-less and like new. See pics of old Pro 9 in the new black case case and the new Pro 10 in the old black case. Amazon did a two day delivery on the blue case. End of update. I would really prefer the spongy rubber kid proof black cases like I have for my Fire tablets with the built in stands. But I have yet to find that for Surface devices. However my Surface is a blue color that looks good through this clear case.

This case gives solid all-around protection for the Microsoft Surface. The clear back looks nice and lets the original color of the device show through—though I’ll say the blue rim looks a lot better in pictures than it does in person. Still, the corners are well-protected, which is what really matters. It’s pretty easy to put on, though not quite as easy to take off. One feature I really like is the separate kickstand—it slides on easily and works great. The type cover stays shut nicely with this case, which I personally love, though I can see how that might annoy some people. Now for the downsides: the type cover strap looked kind of ugly to me, so I just ripped it off—and honestly, I haven’t missed it at all. The cover still fits snugly without it. The case definitely adds some thickness and weight, but that’s expected with this level of protection. My biggest gripe is with the cutouts. The OEM charging cable and a standard USB-C fit fine, but if you’re using a chunkier USB-C adapter or need to plug the cable in upside down, you’ll run into some issues. Overall, though, the case is worth the price. It’s protective, functional, and does its job well.

High quality of materials, perfect fit, easy to install, really high level of protection (already dropped it by accident), doesn't add a lot of weight and doesn't make the product too bulky. But your luxury tablet computer will look a bit like an Amazon Fire Tablet for Kids with silicone bumpers. If that's okay with you and you have enough self-esteem - I recommend this product

The case is really nice quality and the extra storage space was super useful.

This Fintie hard case fits the 13-inch Microsoft Surface Pro perfectly, offering solid protection without adding bulk. The sturdy exterior keeps the device safe from everyday bumps and scratches while still being lightweight and easy to carry. It feels well-made, and the snug fit gives peace of mind when traveling or commuting. Great value for anyone wanting simple, reliable protection.

This case is different from what I originally had in mind, but I like it a lot! It seems very protective yet not in the way. All of the holes are big enough for the accessories to fit. I like the way my Surface closes. Because I had a small issue at first, I talked with customer service, and they were extremely helpful. They told me that my product had a 90-day warranty, and were ready to send a new case to me, but that turned out to not be needed. I think a good product + good customer service can't be beat! To add to this, the unthinkable happened: I had a stack of papers, a notebook, and my computer in this case on my coffee table. Unfortunately, the papers were too close to a candle, and the papers caught on fire. I was in the kitchen so didn't see it at first. When I finally saw the smoke, my papers were burned up, my notebook partially burned, and the case around my computer was melted ... but my computer was protected. I say this because this case protected my computer! Yes, the bottom of the case melted, but my computer was unharmed. I bought another case just like this one!

The case was easy to use. I expected the case to cover the back of the keyboard too, it doesn't. I was a little disapointed. It fits perfectly otherwise.

This case offers a very good balance of protection and low-profile look at a pretty solid price point. I bought this case (black colour) for simple all-around protection and extra drop protection without adding too much bulk to the overall look of my device. I carry my device around in my bag and use it during my commute. This case is thoughtfully designed. The plastic material offers more grip than the original metal surface of my device. My type cover sits nice and flush against the edges of this case. The opening for the charging port is long such that I can position the charging head in either direction without worrying about it coming off. The covers for the volume control and power buttons feel good. The corners feel particularly stable, which gives me even more peace of mind. I also really like the elastic at the top right corner of the case, which makes my type cover feel even more securely attached. Looks-wise, it adds a 5 mm border around the device but it does not look too bulky. When choosing a colour, keep in mind that there will be a 5 mm border around the outside of your screen. I bought the black case, so the black border blends very well with the edges of my screen when I am using it. I was considering the grey coloured case but I think having a grey border on my screen would have bothered me. This is up to personal preference. This case feels more secure than the skin-like cases that are meant for decoration. There are other protective cases that will offer much more protection but they come at the cost of overall aesthetic value as well as a higher price point. For me, this case offers good protection while maintaining a low-profile look that I appreciate. I have yet to put its drop protection abilities to the test but hopefully I won't have to.

S'adapte parfaitement à un Surface pro 11. Je craignais que le clavier devienne difficile à ouvrir, heureusement la coque ne gêne pas.

Great case just not the same color as pictured. I received more of a baby blue than the blue in the description.

The case is perfect when you realise that you slide the rear cover on. Great value for money, a year on and it’s still as it should be, it’s strong enough to protect and slim enough not to get in the way. It’s a golden buzzer from me…

Bottom layer is of low quality l, should be of solid materials