4 Pack Rubber Case Feet with Screws Screwdriver Kit Set for Apple Macbook Pro A1278 A1286 A1297 13 15 17 (Not for Retina Display)

it perfectly fit to my macbook pro. Amazing!

Good quality screews and back cover feet with high quality adhesive

Screws feel as if the head would strip easily compared to OEM screws but they do the job well, just make sure you use the right screwdriver and don’t try to over tighten and you’ll be fine

Repairing a Macbook Pro and found the inside very dusty and grimy due to a missing foot and screw so this combined pack is ideal. Care is needed removing the foot from the backing strip as on mine the adhesive wanted to stay on the backing. I tried from the other side and with care it stayed on the foot. It sticks fine to (pre-cleaned) socket. Screws come with threadlock already applied. The bonus is that the little 000 screwdriver is actually quite good. They usually end up chewed up and put in bin after first use.

The feet fitted like a glove, and the spare screws did the job, even if I only used one of them. The screw driver has a slight tendency to slip off, but the screw heads are ever so tiny, and the blue bit at the end produces quite a bit of resistance, so no wonder it took a bit of effort. I'm very pleased with the job the kit did, and the price I paid.

I bought these to replace missing screws and rubber feet in a MacBook Pro.They were perfect.

The feet are plastic, not rubber like the originals and they also sit higher.The screws were pretty good, inferior quality to the original ones but right size , length and supply (which is what matters right?).Honestly, I think that it is fair to what they cost.

What can I say, they are a perfect replacement for my old worn Apple ones. The screwdriver is quite cheap and poor quality but it will probably do the job if you don't have a better one lying around somewhere.

Auf der Suche nach Ersatz für Gummifüsse von meinem alten 2009er MacBook Pro bin ich auf diesen Anbieter gestoßen. Hier mal meine Erfahrung:Bestellung und Lieferung:Wie gewohnt bei Amazon ging alles sehr leicht. Bestellt, am nächsten Tag bei mir.Umfang und Qualität:Im Lieferumfang befinden sich die 4 Gummi/Plastikfüsse mit Klebefläche, ein kompletter Satz Schrauben (7x kurz und 3x lang) sowie ein kleiner Kreuzschlitzschraubenzieher.Füße: nach Reinigung des abmontierten Deckels mit Spiritus kleben die Füße sehr gut. Auch Wärmeentwicklung stellt bisher kein Problem dar. Haftung der Füße auf der Tischoberfläche 1a.Schrauben: Schrauben sind passgenau, richtige Anzahl und vor allem mit Schraubensicherung versehen um ein unbeabsichtigtes lockern möglichst zu vermeiden. Kopf sehr robust, wird nicht rund.Schraubenzieher: Das ist der einzige Kritikpunkt. Nach der 6. Schraube hatte ich plötzlich kein Halt mehr und der Schraubenzieher drehte durch. Grund war aber nicht ein ausgebrannter Schraubkopf sondern abgebrochene Stege des Kreuzschlitzschraubendrehers. Das ist Low-Budget in Hochform. Lieber Mal etwas mehr in Schraubendrehersets investieren.Fazit:Alles in allem ein klasse Set zum Reparieren vom MacBook. Da die Ersatzteile super halten und von der Qualität auch gut sind, gebe ich trotz des spielzeugschraubendrehers 5 Sterne. Immer wieder würde ich hier bestellen.

الغواء ليس قوي كفاية

Este juego de patas de goma es ideal para mi MacBook Pro. La instalación fue rápida y sencilla, y se siente muy duradero. Los tornillos y el destornillador incluidos son de buena calidad. Después de usarlo, puedo decir que es una excelente compra para mantener mi computadora en buen estado. ¡Lo recomiendo totalmente!

USEFUL TIPS:First, only replace the broken feet. Leave the ones that are still attached alone.You'll want to remove the entire bottom case, fully remove the any leftover adhesive from broken feet and clean it well with rubbing alcohol on a paper towel. Here comes the trick: heat. You need to heat the aluminum before you stick on the replacement feet. Blow dryer, heat gun, electric stove burner. It doesn't matter. Heat it to about 130-150F (just too hot to comfortably touch). Don't touch the area that you cleaned. Quickly put the case bottom down on a handy heat-resistant surface (cotton towel is fine) and carefully attach the new foot.ACTUAL REVIEW.Shockingly good, at least the ones from seller JetecOnline. I suspect there's a lot of fakes on this part, which likely accounts for the bad reviews. Almost indistinguishable from OEM: the same stiff grippy rubber, and the same aggressive stick to the case bottom. I've been using it as usual, and the new feet show no sign of coming loose. The screws are decent too. As mentioned in other reviews, the blue loctite won't do much, but it really doesn't need to. These screws rarely come loose.

Ottimo prodotto per qualità e dimensione, direi pari all'originale. Pulire preventivamente ed in modo accurato l'alloggiamento da residui di colla, collocare il gommino nel foro centrale non dimenticando anche di centrare il piccolo foro posto verso il bordo esterno, esercitare una discreta pressione ed il gioco è fatto. Non ho aggiunto ulteriore colla e dopo diversi giorni i gommini sono fermi e stabili. Il cacciavite in dotazione è un po' "debolino"(io ho usato altro fornitomi con acquisto batteria di ricambio) comunque adeguato al prezzo del prodotto, utili le viti di ricambio. Consegna OK in 24 ore