INJORA 39mm Shocks- Aluminum Threaded Shock Adjustable Absorber Oil Damper for Axial SCX24 FMS FCX24M 1/24 RC Crawler Car Upgrade Parts(Grey)

I recently upgraded my Axial SCX24 and FMS FCX24 with the INJORA 39mm aluminum threaded shocks, and I’m impressed with the performance. Here are some key points: Build Quality: The shocks are machined from aluminum, giving them a sturdy and durable feel. The threaded bodies make pre-load adjustments quick and easy. Huge upgrade over stock SCX24 shocks. Performance: These shocks use oil dampening instead of friction, which provides a smoother and more consistent rebound. The inclusion of bladder seals helps maintain this consistency. Depending on the install location/angle you may have to do some adjustments to get them to work properly. The shocks are about 3mm longer than stock but I would still consider them more of short travel shock which helps reduce body roll and stability. If you are looking for more articulation and travel go with a longer set. Customization: The package includes three different spring rates, allowing for fine-tuning to match your specific chassis setup. Plus, the variety of colors available lets you match them to your RC crawler car. Value: At $20.99, these shocks offer great value for the quality and performance they deliver. Cons: You do have to assemble the shock mount. These parts are very small and can be very frustrating if you do not have the experience. I would suggest looking up videos to make the install easier. Overall, the INJORA 39mm shocks are a fantastic upgrade for any 1/24 RC crawler enthusiast looking to enhance their vehicle’s performance and appearance.

These shocks are great....but you have to do some tinkering. First they were sticking very bad. So I took them completely apart. Where the shock shaft exits the shock body it has a small plastic ring then a rubber o ring then another plastic spacer then a shouldered plastic washer that lines up with the hole in the screw on cap. What happens is the cap gets tightened and it squishes the o ring and makes them stick. Take out one of the plastic spacers and reassemble them. They work perfect! I actually lost one of the internal parts and they sent me new internals even though it was my fault. These parts are supper small. Like use a magnifying glass to work on them small. It took a few weeks to get the replacement parts but they cam through. I have no complaints. And I run them with no oil and they articulate great and just work good. And there about 3mm longer then stock so you dont have to replace a bunch of stuff to use them. Would buy again. In fact.....I did! Lol!!

long travel, they work great. only thing is they bind or get stuck when not used for a while. also when articulating, the shaft has some friction with the inner walls of the shock/oil tube. they should make it smooth on the insides. other than that, good shocks. improved articulation by a lot on my Axial SCX24 JLU.

Nice addition

Great shocks Priced right Looks great

These are some of the best shocks for your money. They are a drop in installation though spacers maybe required depending on your setup. These finish looks amazing and comes with springs of different stiffness. They have proven durable and I have yet to have a failure with them.

Really nice shocks. I love the length on them. Helps me to dial in my crawler and get the best performance out of it.

UPDATED: I changed my overall rating from 2 stars to now a full 5 stars... let me explain why. I was unhappy because.. to me at least.. the stiff/heaving spring is far far too heavy. Perhaps if you have a hard body, and, add a bunch of extra things with weight... 'maybe'. I expect for most, even the medium spring will be fine. But, my original complaint was that the lightest spring was still too stiff if you are using the polycarbonate body 'stock' for things like the Jeep. I wrote a review here criticizing the springs and Injora was VERY quick to respond. They advised for me to really double check the amount of oil in the shocks. I had thought 'no way'... I've been filling/bleeding shocks on 1/10 scale vehicles for years and that they must be nuts. LUCKY for me... I said 'what the heck' ... I'll give it a try. WOW ... what a difference. Just taking out about 4 drops of oil made it as if I had dropped down another shock rating. While I might still want a lighter spring to experiment with... I think now the shocks are very good. The shock instructions say not to overfill them. I would suggest to all of you reading this... don't fill them even 90 or 80%. Instead, add about 1/2 of the shock oil capacity and you'll probably fall in love with these shocks. Think of it this way, other shocks on the market for the SCX24 are 'friction' shocks. People out there are putting marine grease in the 'friction' shocks to simulate/cheat and make them perform 'like' these 'sealed' shocks. BUT.. if you try to do that with friction shocks, eventually you'll end up with a sticky greasy mess. So STOP... don't get those 'friction' shocks and instead get these 'sealed' shocks from Injora. Just put a medium oil (perhaps about a grade 25 or 30) and only fill them 1/2 way like I said here. If you want, you can try adding more, BUT, if they are too stiff... that probably means you need to take out some oil like I did.

Does what I wanted. Consider this a minimalist way to make your fcx24m better. It won't turn it into a climbing robot which is not what I want for this car so I'm very happy with these shocks. I used top mounting position which will add only a little height vs shorter stock shocks in the middle. Another reason I recommend top/upper position is that these being 39mm vs stock 32mm you will run into drive shaft issues if you try to stretch the fcx24m too high. Using 25w oil, 25% sag, medium springs thumb screw adjusted 75% all the way at the back but only 20% in the front. I'm new to this so forgive me. Drop test and it sits immediately. Lost a star which is harsh, I would have only taken off half if I could: when the car is left untouched for 30 minutes or more the shocks will kind off seize up. I'm ok with that as it's as simple as moving it past that point and they are super plush again. Its only after being parked for too long. I'm sure I will find a work around but I'm not that bothered by it.

Très bonne qualité avec les produits Injora, belle esthétique, s’adaptent parfaitement au SCX24

Gute Injora Dämpfer für 1/24 und 1/18 Crawler! Fahre ich auf mehreren Crawlern für verschiedene Einsatzzwecke!

An sich ein echt klasse Dämpfer der mit Dampferöl funktioniert und sogar auch noch dicht ist. Allerdings bei längerer standzeit ( 1 Tag ) hängt der Dämpfer leicht fest sobald einmal kurz eingefedert keine Probleme mehr und super Fahrgefühl

Amortisseur à bain d'huile travail bien réaliste pour mon SCX24.