AeroPress Stainless Steel Filter Standard

I wish I'd got this sooner instead of muddling with the disposable paper filters for so long. Grounds wash off very easily. It seems to flow a little better than the paper filters too. If you're a coffee snob then the taste is slightly different, maybe better (something to do with what paper absorbs). edit: Finely ground espresso grounds can clog the tiny holes on this filter (just like they tend to compress into a plug with paper filters), but using the plunger to pull everything "up" a bit, and then pressing back down, that seems to help. In other words, easier to deal with than the paper filters if very fine grounds are your thing.

This is a very sturdy filter so unless you're straight up abusing it, the mesh should hold up for a long time. Make sure you make your ground slightly coarser than when using a paper filter, otherwise, you'll be getting a very gritty cup of joe. Even with a slightly coarser grind, you will still have some ground stuck in the filter, so make sure you clean it before the ground dries up and gets stuck. The description doesn't tell you this but you pretty much have to use the inverted brewing method for it to work, otherwise, your coffee would not brew at all and the water would just instantly leak through. For anyone who has not tried the inverted brewing method, it's not hard but may take a little bit of practice. The AeroPress and its standard paper filters changed my life but this filter changed my life all over again. Instead of that super clean coffee, you get a nice full-bodied coffee with a great mouth feel and a lot more flavor. If you don't mind a little extra cleaning or the inverted brewing method, this is definitely a good buy.

This one little piece of metal is great! For roughly ten years, I've used my AeoPress making each cup of coffee to my liking. I probably make too much each day, but that's my issue. Since I travel virtually year-round away from the US, I'v found the paper filters a source of frustration, frequently running out. Mid-year I returned to the US and ordered a supply of paper filters, and after trying this product out left them back in the US. No longer paper for me, I truly love this filter.

As a more eco-friendly (reusable) alternative to paper filters, this is a good option. So far, the taste isn't as nice, but probably there's a learning curve. It could be helpful to give more direction about precise grind size for good flavour because "medium fine" is open to interpretation. It is a bit of trouble to clean out the grounds unless a lot of water is used (offsetting the ecological benefits). The method I've landed on is pushing off the grounds, followed by a quick soak while we drink coffee then rinses while we rinse the other components. Some grounds remain lodged in the fine holes in this filter-- these are more easily dislodged when they dry-- and I've located a soft toothbrush. A lint free could work but may get "shaved" by the metal. So, like so many gadgets, this is useful, but in no way as trouble-free as paper filters. So select as best fits your priorities.

This was a great buy! I'm not a coffee expert but I do like a good cup of coffee (a cup of 100% Kona coffee is perfect for me). I like the AeroPress because, unlike the coffee press or drip coffee maker I have, it uses air pressure that I control to move the water through the grounds, so in at the end I have a gap of air between the coffee grounds and the press. I feel like I have less grounds in my coffee and I have a little more control of the flavor since I control the rate the water goes through the grounds. I do use the metal filter and I haven't tried it with the paper filter so I am not sure of the difference in flavor if the paper filter is used. I must also say that I'm used to drinking a big cup of coffee and the press I got makes a smaller cup of coffee which means I have cut down the amount of coffee I drink. For the price, I definitely think it was worth it!

It's a challenge to issue a blanket statement that this filter is bad. For 99.9% of coffee drinkers I've met throughout my life, this filter is bad. I have met a single coffee drinker that wanted coffee colored water flavored water. This is perfect for him, as the water will just rush through it and absorb absolutely no flavor. There are some comments suggesting an invert brew process, this is both irresponsible from a consumer-to-consumer standing and just not actually a solution. The solution is the manufacturer actually develops a product instead of paying an intern to gin it up in SolidWorks and then off to the races with production. Whatever percentage of the "filter" I have covered with polyimide tape there transforms it into a mostly functional item though it adds a not insignificant amount of resistance plunging the coffee. IF AeroPress spent more than 30 seconds on product development (this is assumed to not be the case) the assumption is that time was spent making it easy to plunge rather than making it actually work. There is relatively little room in my perceptions to be more even-handed on their product development team but they brought it most of the way there. There isn't much to actually do for product development to bring this to the finish line. Getting rid of the branding, at least where and how it's situated as AeroPress is cut into the surface of the filter, would be the solid step forward. It's almost certainly a petty nitpick, but they aren't entirely clean edges and you're scrubbing and rubbing this thing on a daily basis. By far the most important angle they abandoned or never considered is just actually figuring out your waterflow impedance. There are so many holes in this "filter" and they just immediately pass through any amount of liquid poured in that it obviously needs more testing. I'm unsure, but the assumption is these parts are stamped. Stamping tiny holes is cumbersome, I'm not oblivious to the challenges but they must be overcome to actually be a marketable product. A typical, modern corporation would have (and should have per shareholders) manufactured 2-5 different impedance "filters" and sold them individually at this same price point - knowing for damn sure people are going to end up needing multiples to find their brew. They didn't do this. A moral corporation from yesteryear would have designed the same 2-5 impedance filters and thrown them in the same packaging with no or marginal price change. This is , obviously also, not the case. They do have a restricted flow filtration cap, a cap they charge $25 for. So then, clearly, that is VITAL to this metal filter. If it's vital to this filter, it should probably be included. It is not, though it is sold in a bundle together. This isn't a review of that flow control filtration cap nor did I buy it or was it clear when ordering the metal filter that I'd have impotent coffee without this. This is a minor annoyance. I consider this to be a gamble, investing in owning any of their products. There isn't a lot to talk about. I've covered the actual user experiences I've had. I'm now going to actually just throw shade at AeroPress. I stand by the above as being more fair than not, and I'm baffled by the overwhelmingly positive reviews. If you read farther, I stand by it as being an irate outburst at a mostly harmless company just trying to get you quick and easy coffee and I would favor you take it as entertainment than a negative towards the product. "Keep Pressing: Designed for use with AEROPRESS coffee makers, our metal filter is an alternative to paper filters for those who enjoy a fuller bodied cup of coffee; Get consistent, grit-free results no matter what brand or blend you use" This is what I'd call a Product Description As Lies. There is no fuller bodied cup of coffee, there is colored water. There is no consistent, grit free results - the holes are gigantic and even at a large granule grind I have pure silt at the bottom of my mug. Because the filter just flushes fluid through too rapidly. This is not an alternative to paper filters, you should either buy those instead or get an actual french press. "Fuller Bodied Coffee - The reusable AEROPRESS metal filter allows oils to pass through for a somewhat fuller-bodied cup of coffee, whereas the paper micro-filter keeps out those oils for a cleaner flavor profile" They double down on their fuller bodied coffee here. They think it's so much fuller bodied they need to mention it twice. Despite making coffee colored water. If those oils are beneficial to any flavor palette, it's wasted with this filter regardless. "About AEROPRESS: Smart design and creativity have always been the heart of what we do, and we are now squarely focused on inspiring even more coffee lovers around the world to revolutionize their coffee routine; Designed in Silicon Valley, Made in the USA, Materials used in AEROPRESS coffee makers are free of BPA and phthalates" I'm offended by this entire snippet of product description. They made a filter that filters nothing out, while declaring smart design as being central to their culture. Being BPA and phthalates free is neato burritos, if you aren't applying polyimide and silicone adhesive into the "filter" to make it a filter. Also please don't. One it's expensive tape, I have it because I'm weird. Two it's a silicone adhesive. They're both extremely resistant to heat, well over what I'm brewing coffee at, but hey don't voluntarily contaminate foods/drinks with these. In short, my design is also terrible but I needed a flipping cup of coffee and was PRESSED for time. I'm done with my meandering efforts to convey that this product isn't for you. I hate paper filters, I think you should also have an opposition to paper filters. I strongly suggest you stick with paper filters for your AeroPress, or buy a french press.

I’ve had this metal filter for years. Easy to clean. Awesome accessory!

Does not work the way it should. Grit gets through and the water flows through so fast. For two servings of coffee, it isn't abnormal to have the water filter through so fast that it's akin to a mug of the coffee concentrate. That shouldn't be happening. Paper filters are better. I gave this a good try for several months. I really do appreciate a sustainable approach. But if you love your coffee, this is not the way to be a bit more sustainable. Obviously, this wasn't SO bad that I couldn't put up with it for a few months. But today I really got down to my last straw with this filter. Some people will find this filter to be an acceptable option. But if you are a snob about your coffee, don't get this. For a more sustainable approach, I'll make two servings of the coffee concentrate and drink a cup of coffee a day. Store the portion for the next day in a small container in the fridge.

Eu já tinha um, de outra marca, mas esse da Aeropress é ainda melhor! Pra quem a mini ou a go, é o ideal.

Useless to buy because it doesn't work unless you have a paper filter so don't waste your money.

Cloudy coffee. Paper filters are better

I'm not a big coffee drinker and so I wanted to get something very portable that wasn't a single purpose bulky appliance. Aeropress was the perfect solution. It originally comes with 100 circular paper coffee filters and when you pour your coffee, a lot of pressure was needed to push and strain the coffee through. These metal mesh permanent filters don't need any pushing. Just lightly tap the sides and the coffee just flows through without any grains making it pass the filter. Very fast and efficient. Also, fast and easy to clean. And also, no need to ever buy paper filters.

Good. It’s very thin and one needs to be careful while cleaning or handling it.