EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black

Obviously vertical gpu mounts work best when you've got water cooling, but I decided I wanted to go with a horizontal fan look with my Wraith Prism and my EVGA 3080, so I opted for this gpu mount versus using the one built into my Corsair 4000D, as that slams the car right up against the glass. The product is built well. Assembly was actually much easier than it seemed it would be when I first took it out of the box, which for the record the packing was excellent and everything was packaged and insulated well. The riser cable is nice and flexible, although the end that goes into the PCIe slot of the motherboard is a bit too loose at the front end for my taste; had to keep pushing it back in after positioning the gpu, even after flexing the cable as flush against the motherboard as possible. That said, in my Corsair 4000D, with my Wraith cpu cooler, you cannot install the bracket. Period. There's no way of finagling it to get it to mount in the seven slots of the case like it's supposed to, as the gpu pcb and cooler overlap with the cpu cooler by a good solid inch. Regardless, the product is excellent, and given the needed clearance, seems like it would work very well when mounted properly. In my case, I've just got it propped up as flush against the back of the case as I can get it and am leveraging the included support bracket to help it stay in place. With the glass on and sitting at a normal distance, you can't tell anything is amiss. So, good product! Just make sure you take into consideration the necessary overhead clearance for the gpu.

Arrived in great shape, packaged well. Instructions were a bit vague when it came to attaching the gpu, riser, and bracket all together. Since I've seen reviews for a totally different bracket, I want to be clear: this bracket has the logo on top of the lightbar, which seems to be of different design compared to the ones with the ezdiyfab logo on the front of the lightbar. PROBABLY GOOD TO PLUG IN DISPLAY CABLES BEFORE YOU SEAT THE BRACKET IN YOUR CASE Pros: -adjustable support bracket -sturdy -adressable rgb works with aura sync -relatively easy install -looks great Cons: -can be a little tricky *patience* -'white' rgb doesn't get too white; you can see blues and purples amongst the LEDs so I had to kind of tune the RAM color to match its ice-bluish color which is still pretty cool

This was a monumental PIA to install. Instructions are terrible and just completely skip over the hardest part which is how the hell do you connect the riser cable to the motherboard once it's installed in the case? The cable is so long and the vertical mount is so close to the mobo that it's impossible to be able to maneuver the cable and connect it. Any of these so-called "guides" on how to do it on youtube of course gloss over any of the difficult parts and say "its so easy".

You need EXACTLY 8" or more clearance between whatever platform your GPU will be sitting on, and anything above it (cpu cooler in my case). This is such a cool mount though!! I had a hard time getting it to install, because it's so weirdly engineered. But it's over engineered, it actually was pretty sturdy! Unfortunately it doesn't fit in my case with my 4080 because my cpu cooler is way too big.

Looked good but functionally, too flimsy for the weight of a 4090. It would be fine for smaller, lighter GPU's.

No issues what so ever, just be mind full that the support leg needs to rest somewhere so could be a bit tricky if you have an inverted fan underneath the leg.

Update with a new pic: I'm dropping my rating a couple stars because in less than six months the LEDs went from being a nice bright white to discolored yellow. While I was initially inclined to think, "oh, maybe it's just a little grimy because I like to puff on some herb while I'm gaming", that doesn't appear to be the case here. I took it out and cleaned it thoroughly with no effect, none of the other lights in the system discolored like those did, and if I look closely at the LEDs inside the plastic housing, I can see that only some of them (all but 3) are discolored, so this definitely seems like a QC issue with the LEDs and not smoke damage. I've made no attempt to contact EZDIY for a replacement because I had modified the frame to get it to fit and wouldn't expect they'd replace it (nor do I want another one at this point), so I can't speak to the quality of their customer service, but ultimately, I took the loss and removed it from my system. Original review: So I knew upfront there was a risk that this wouldn't fit in my PC. I was mounting a 3080 on it between 3 Fractal Prisma AL-14 fans and a Noctua NH-U12A air cooler in the full size Fractal Torrent case. Out of the box, it didn't fit, the 3080 was about an inch too tall to fit under the cooler. It's also not the easiest this to put together but once it's together it is pretty solid. When I discovered it wouldn't fit, I looked it over and instead of returning it, decided I'd try to modify it to fit. I was able to drill new holes into the back plate that slots into the PCIe covers, a touch over an inch lower than the factory holes, showing me to attach the GPU bracket lower which got it to fit about as perfectly as it could've and it looks very nice now. My main complaint, or I suppose recommendation to the manufacturer, is that it doesn't just come with multiple sets of mounting holes in the back plate to allow people to adjust the height. As a 3rd party product, it's pretty easy to assume that it won't fit as is in a lot of PC's and having mounting holes at various heights would be just the thing to add the adjustability needed to install it in almost anything and would probably save you money in the long run as people who don't want to make the modification I did would still be able to use it rather than returning it. Tldr: I think it's a great product overall to add some extra flair to your build, but it's not very adjustable so be warned, it may not fit in your build without some modification.

The Good - - Does the job, no issues during install. - Dig the LED bar. - Installation was not as bad as I thought. The thing that took the longest was getting the card to fully sit properly into the pic ribbon slot. The slot mounts under the frame, so it looked like not enough of the slot was jutting out for the card to go into. A little trial and error and I got it in fully. Otherwise, install was easy. The Bad - none. The Ugly - I don't know how it fares with longer cards. Im using a rtx 2070, so its not crazy big. I guess fair warning, your card may be so big that in a vertical position certain components on the mobo may be blocked. I dont habe easy access to my internal drive ports, but it's to be expected I guess.

Hi This is good virtical mount .i use it for rtx 4090 tuf with no problem in my coriser 5000t case and the rizer cable is good quality also play with it cyberpunk and the Witcher with no problems with the frame rate. It is very good product I totally recommend it .. you will not regret it. One more thing, you can even adjust the vertical mount forward and back inside the case.

大きなグラフィックボードもしっかり支えてくれるので安心。

Updated Review: Well, it looks like I was thankfully wrong on this one. Even though the cables didn't leave my with the warm and fuzzies, I now have my PC all setup and can confirm that this vertical mount rocks! The cable isn't cheap, I'm getting identical performance with the mount and with the gpu in the motherboard. Plus it looks so good, I've had a lot of compliments and ppl asking me for the link to buy their own. Only con I have for this is regarding the locking latch quality. I tried to take my gpu out but it's not easy to get at the clip when it's in there and I ended up breaking it off without using too much force. I don't plan on removing my card for a long time and it is in there nice and snug so I'm not worried about it falling out, I just hope that taking it out won't be hard without the clip... Anyways just be careful and you should be fine. ARGB works but my motherboard lighting software can be finicky with this thing... Some effects light up all of the LEDs and some light up just the last one, so I'm going to chalk that up to bad programming, hopefully an update fixes things. This mount was cheaper than most others and it has RGB lighting, so I highly recommend it! Original: I won't be building my pc for a couple of weeks, but I'm hoping this cable performs better than it looks. It's very dirty and there are some paint(?) spots on some of the pins. Hopefully it won't effect performance... I'll update this review once it's installed.

Excelente kit de solución para colocar la trarjeta grafica vertical. Se ve totalmente increible. El ensamble es complicado pero todo funciona muy bien.

Fast delivery and a fine product, just one small problem . . . . . My 4090 is so big that I can't use it in the case I bought just for this project. Good design though and the extra support bracket is a good feature. I also liked the fact I could remove the RGB with four screws. Price/performance is great. Also good is the open bottom area for max airflow.