True MODS 2pc 3ft RGB LED Whip Light for UTV ATV RF Wireless Remote Antenna

This is a great whip! The parts are simple, the installation is simple, the LEDs are bright as heck, the controller is easy to use and provides many options. The colors are rich, the build is great, and it comes set up with an American flag kit. Customer service is outstanding also. They are responsive and pleasant to deal with. Other whips cost a lot more, I see them on my buddies' buggies and this one is just as good or better for less money too!

Flags work great . Forgot to take them off first time loading into enclosed trailer and they bent completely over and were perfect after still. Mounts and wiring were not as advertised but actually nicer than I expected .

We purchased and installed the ONLINE LED STORE 4ft LED Whip Lights w/Flag [21 Modes] [20 Colors] [Wireless Remote] [Weatherproof] Lighted Antenna Whips - Accessories for ATV Polaris RZR 4 Wheeler The wife requested a removable LED whip for her Jeep JKUR Recon for cruise nights, and night-time off road use. It can also be used to provide set-up lighting when setting-up camp after dark, or assisting in nighttime rendezvous with other group campers, also night-time trail/dune safety. We chose the 4 foot whip because it was already mounted quite high off the ground on the lifted Jeep. Note, the 4 foot whip as mounted, will NOT clear normal/slightly higher than normal garage doors and must be removed and stored. Depending upon trail conditions with low overhead clearance due to vegetation, a shorter 3 foot whip may be a better choice than a longer 4/5/6 foot whip in this case. Installation - Was simple as we had already installed a TeraFlex reinforced tire carrier with a Hi-Lift jack bracket which has two antenna holes. One was in use for a Firestik CB antenna, the other was available for a LED whip light. On Jeep JKURs, there was a 12 vDC outlet inside the rear cargo area (passenger side). The anodized aluminum mounting socket (silver*), at its bottom has a steel metric hex-head bolt, washer, lock washer, and a nut to mount it in a mounting hole. *Note the manufacturer's website shows the mounting socket as black, not the silver anodized we received (and silver is pictured on Amazon) if that's important to you. Only small issue we saw from a hardware perspective was the vertically oriented steel hex-head bolt recess could collect water and rust over time (making removal difficult when inserting a hex wrench in a rusted hex bolt socket), this is preventable with stainless steel hex-head bolt substitution. The flag clamp bolts and ny-loc nuts appear to be stainless. Power Cord - The LED whip includes about 4 feet of power cord, so power was easily available (with several feet to spare) by adding a male 12vDC cigarette power plug to the (solder finished) end of the whip power cord wires. The LED whip strips only draw between 1.5 amps (3 foot) to 3.0 amps (6 foot) 12vDC depending upon the length for the whip. General Construction - The LED whip appears to be made from a clear flexible polycarbonate tube (some folks prefer a opaque/milk white tube for more uniform lighting than LEDs in a clear tube. The clear tube has three interior LED strips running the length of the whip, providing multiple programmed colors and patterns, including white, and solid or variable colors (see JPG of remote details). The whip also has the following flag mounting hardware - two adjustable rubber-padded tube clamps with stainless bolts and ny-loc bolts, and two aluminum carabiner loops to mount the included USA flag - or another safety flag of your choice. Detachable Whip - The mounting hardware allows for easy removal of LED whip when not in use. The mounting socket best resembles a special oxygen sensor socket tool with a wire slot along its length, to allow for the power cord, and to hold the whip firmly. An easily removable "round wire locking retaining pin" (see photo) holds the whip shaft in the mounting socket. The detachable power cord is of simple, and with careful use, reasonably reliable design. It won't likely stand up to rough use/abuse so be prepared for possible repair at some point. We recommend sliding the whip and its power cord carefully in and out of the whip mount socket when installing or removing it. The long part of the power cord is detachable (if desired) from the whip via a screw collar retainer and an indexed two-connector male and female connector that has an o-ring seal. If treated gently, this mount, retaining pin, and simple power cord design should be fine compared to other trouble-prone interior/integrated/proprietary power sockets. When the whip is removed, no connectors are exposed to moisture/the weather for corrosion considerations. Note: Product posting on Amazon claims an IP65 waterproof rating, manufacturer's site does not mention an IP65 rating. The whip tube is sealed with a flexible sealant at the bottom and a black cap (possibly with sealant) at the top. The small RF wireless mini-remote thoughtfully comes both with a CR2025 battery installed, and an extra CR2025 battery. Be sure to remove the clear battery isolating/shipping strip before using the remote. Specs from the manufacture's site: "The OLS RGB LED whip comes in multiple sizes and have a universal mount, making it suitable for all types of off-roading automobiles. Combing the prominence of a sand flag and visibility of RGB LEDs, the LED whips offered here promotes both maximum safety and style. Packed full of different modes and numerous color selection, the OLS RGB LED whip with flag comes with a RF remote control, allowing you to set it at a color to match the trim of your wheels or to suit your mood for the evening. Whether you like kicking up the sand cloud with your ATV, UTV, dune buggy, or sand car, equip your wheels with the OLS RGB LED whip and make your presence known to everyone around. Interchangeable/Compatible with: All automobiles and devices equipped with a 12 Volt DC power source. Features: USA flag with secure flag clips included. Universal mount and waterproof construction. Remote control for ease of operation. Flexible whip capable of handling the strongest of winds. Bright RGB LEDs add style and promotes safety. Product Content: 1 x LED Whip 1 x Flag Whip Mounting Accessories Flag Mounting Accessories Instruction Manual Specifications: Input Current @ 12V: 3ft: 1.4A (+/-0.1 A) 4ft: 1.9A (+/-0.1 A) 5ft: 2.5A (+/-0.1 A) 6ft: 3.0A (+/-0.1 A) 1 Year Manufacturer Warranty"

Easy to install. Has positive and negative wire at the end of the light. All you do is add a terminal ring connector and hook it up to the battery. I saw a post that said warning it will catch fire. Upon further inspection, I did not see any fuse on the light so I could see where someone had a bad experience. I got an inline fuse with 3 amp fuse blade. If anything were to happen, the fuse will blow and hopefully prevent any sparking which can contribute to a fire. The light is bright but these are not the spiral LED. It's just an LED strip inside the tube. The picture shows an image where you can bend the light back 180 degrees, you can't do that. It will snap for sure. It's really stiff. This is the difference between a $100 light compared to $200-$300 on the market. It comes with 2 remote. I wish it was app controlled because the remote is not waterproof and it can break. If these lights were bluetooth and app controlled, you don't have to worry about losing or breaking your remote. Someone mentioned that the lights does not sync together with the same color. What I did is use both remote and press at the same time. It seems to work for me to keep both lights on the same color. Overall, it's okay for the price. It's a little cheap. I feel like this unit should be worth about $60-$80 for a pair. It's just a clear tube with LED strip. You can get those strip for $10 and a clear tube for about the same price and make your own for under $60 for a pair. You can get caps on each end and silicone to waterproof the inside. Normally LED strip are waterproof anyways the caps is to seal any moisture trying to get inside and that's it. You'll have your own lights for half the price as this

a verry good product

Great whip Light. I wanted a little shorter whip because I do a lot of trail riding in the trees. This whip light has held up very well. The flag was on the cheaper side and unfortunately after a 100 mile ride last weekend, it disappeared leaving only a grommet and a hook but it can be replaced. I received many positive comments on it. *Update: The only flaw if the wires going into the bottom of the whip are weak and will short out. Quit working after about 5 months. Tried to fix it myself but could not. Really like this whip, but frustrated that it no longer works after such a short time.

I have Had nothing but trouble out of these since receiving them. One of The Whips wouldn’t work initially. I contacted The company and they said they would send a replacement however i never Received it. I was Annoyed and decided to just take the loss. They were still hooked up however. The last ride we went in it miraculously started working which was odd but we thought “okay whatever”. Ride for about 10 minutes and it started flashing in and out so we rode about 5 more then stopped to check it out. I was Sitting in the buggy, buckled in a six point harness, when everyone started yelling to get out, turn the buggy off, etc. They caught on fire from the base of the whip and followed the wire all the way to under my seat before it was extinguished. Could have been a horrible outcome had i not Gotten out soon enough or not had an extinguisher near by. I contacted Them again about a full refund and i would Gladly send these back to them but have not heard anything. Unless you want your buggy, vehicle, etc burnt to the ground i do Not suggest buying these.

Brighter than I expected for a single LED strip but not nearly as flexible as depicted in the pictures. Easily installed on a Kayo Fix 70 by wiring into the taillight wire so that it powers on with the headlight switch.

Helemaal geweldig