BALL RESCUER: Tennis Ball Pressurizer – Converts Compatible Tennis Ball Container into a 30 psi Ball Pressurizer & Extends Ball Life (Pump & Container not Included in Standard and Standard Plus)

First and foremost, the Ball Rescuer does really work. It can preserve the liveliness of new balls between uses, and it can re-pressurize slightly dead balls as well. The design is superior to other similar products because the air pump valve allows you to really dial-in the pressure according to your needs (think ball preservation vs reconditioning). Second, the customer service is great. The guys are quick to respond if any issues or questions arise. They went above and beyond to take care of my minor issue. I have owned mine for a little over a month and it has already almost paid for itself. Would recommend (and do often).

Worked great until it started leaking from the valve. I messaged support and they shipped an upgraded replacement within the week

Overall, I’m happy with it and it does work much better than the Gexco and Tourna twist style ball savers. Using a bike pump gives you a lot of control over the amount of pressure. Couple of tips: 1. It is VERY finicky about the can because it relies on having a regular Penn Championship can with a perfect metal rim. You may need to try many cans before you find one that holds pressure. Dents and cans that are out of round will cause leaks. 2. You can use this to repressurize completely dead balls but if you use too much pressure and the ball collapses it will never gain pressure. You have to take your time and pressurize until just before it collapses and leave it there for a week. Then add a little pressure and leave it there for a week etc.

Okay this is for those wondering what the relaxed diameter of the unit is. Couldn'tget an answer frombthe manufacturer. I wanted to know what the actual diameter of the unit to see if other cans in my possession would fit....see the pictures. I measured the bottom sleeve, furthest from the screw down pressurizing cap and the the top where the gasket makes contact with the metal rim on the tennis ball can. Note the bottom is approximately 75mm and at the top it's 74mm. These dimensions are relaxed without stretching the sleeve. Good luck to all hopefully this helps a few. So now you can check your existing stock of used cans! Had to repurchase, apparently I got a used/returned one?. Looking forward to actually putting it to use. Well made and designed product. I will follow-up with review once a replacement is recieved, but looks promising based on concept and design.

Worked great for the first 2 months, then started leaking. I tried the manufacturer's suggested fixes, but nothing worked. Now it loses all air in just a few hours. Since I'm past the return window, I’m stuck with a useless product. Save your money and skip this one.

Overall a good product. It seemed to be complicated to use at first but it actually is a lot easier than it looks. It does revive balls that have been used moderately (not intended to revive old, dead balls, but for preserving the life of new balls, it works well). Try to make sure to maintain this product by lubricating so pressure doesn't escape, and troubleshoot by using a wrench if the device gets stuck on the can.

It holds the pressure on tennis balls really well. You do have to have the right canister. I used Penn's. Dunlop did not work. Assemble as instructed, make sure you tight it well - if you hear a hiss then you know it's not tight enough. A simple bicycle pump would suffice (schrader valve). The included pressure valve indicator is a must to know if air is leaking or not. Balls last easily 10 sessions or more (just up to you if you like to play with balls with barely no felt left). Works better than manually screw on to create pressure type of ball saver canisters.

4/23/2024 My unit leaks, after some experimentation think I have found a solution. You need to fill in the space where the unit joins the threads. I used a silicone to fill the joint. Keep in mind that just gluing the joins together may not or may not work. In my case I put the unit together and tighten it. There was still some space between the joints. I filled in that space with silicone. Make sure it is well lubricated so that you don't glue the cover portion to the bottom section. the lower rating is because I have not found that it repressurizes the balls, but it does keep the ball pressure up so you an use them longer. 5/2/2023 I have tried the recommended Penn and Dunlop plastic cans and even Gamma, they are too large for the Ball Rescuer. 5/4 Update, opened up another Penn Championship can just to test again. This time the can fit. Will see how it performs.

⭐️⭐️⭐️⭐️⭐️ Producto espectacular y una marca y empresa de 10! Llevo ya unos meses usando el Ball Rescuer y solo puedo decir una cosa.... que gran idea 👏🏻 Si juegas al pádel y te da rabia tener que tirar pelotas que aún están nuevas pero se deshinchan, esto es justo lo que necesitabas. Convierte un bote en un presurizador perfecto, y encima con indicador de presión para tenerlo todo bajo control. De verdad funciona y yo era de los que no daba un duro por este gadget. Pero a parte de dar durabilidad... consigue meter presion si tienes bolas ya trilladas. El diseño es sencillo pero súper eficaz, se nota que está hecho con materiales de calidad. El color amarillo es llamativo y asi lo tienes siempre controlado y el cierre encaja a la perfección en los botes que tengo de tres o cuatro pelotas. Además, Ball Rescuer como empresa merece un aplauso: no solo hacen productos de grandisima calidad, sino que tienen un proyecto de responsabilidad social para recoger bolas inservibles y darles una segunda vida. Eso dice mucho de ellos 💚🥎. La atención al cliente también de lujo, rápida y amable. Se nota que hay gente detrás que realmente se preocupa por mejorar la experiencia de los clientes. He tendio que pedirles ayuda sobre un producto y han actuado de 10, no puedo estar mas agradecido y contento. En resumen: ✅ Fácil de usar ✅ Material resistente ✅ Funciona de maravilla ✅ Empresa comprometida, seria y eficaz. Si juegas habitualmente, te ahorras dinero al mantener tus bolas al 100% ¡Un producto imprescindible para cualquier jugador de pádel 💪🏻. Ahora que vienen fechas de regalo, pidete uno o regalar a tu compañero para que no tengas que abrir botes cada 2x3.

The product is of good quality, it is easy to use and performs its function efficiently, I am quite satisfied.

Highlights am Anfang: - Verlängert die Lebensdauer und Sprungkraft von Padel-Bällen deutlich - Leistet einen Beitrag zum Umweltschutz - Hilft langfristig Kosten zu sparen - Passt nicht auf alle Padel-Dosen Anfangs war ich skeptisch, ob ein Druckluftbehälter wirklich notwendig ist. Neue Bälle gibt es im Angebot schon für 6 €, und ich war mir unsicher, ob so ein Behälter tatsächlich die Haltbarkeit der Bälle verbessert. Nachdem ich aber erfahren habe, dass jährlich mehrere hundert Millionen Tennis- und Padelbälle weggeworfen werden, wollte ich dem Ball Rescuer eine Chance geben. Ich habe mit Nox Titanium Bällen getestet, da ich eine 4er-Dose hatte. Dabei fiel mir auf, dass der Ball Rescuer nicht auf alle Dosen passt: Bei der Nox-Dose war kein druckdichter Verschluss möglich, bei der Wilson X3 Dose hingegen funktionierte es problemlos. Die Nox-Bälle waren bereits zwei Wochen alt und dreimal gespielt worden. Ich lagerte drei Bälle im Ball Rescuer und einen als Referenz normal. Nach nur vier Tagen bei 30 PSI im Ball Rescuer sprangen die drei Bälle deutlich besser als der Referenzball. Das Ergebnis hat mich positiv überrascht, und ich werde den Ball Rescuer weiter nutzen und auch mit neuen Bällen testen. Ich bin überzeugt, dass die Haltbarkeit dadurch weiter verbessert wird. 5/5 Sterne

Enkel att använda och håller trycket bra.

It doesnt work well. It loses the air even closed tightly