Mini Milling Machine Work Table Vise Portable Compound Bench X-Y 2 Axis Adjustive Cross Slide Table , for Bench Drill Press 12.2inches-3.54" (310mm 90mm)

The unit was a delivered with perfectly adjusted gives. There was no need for any adjustment at all. Everything works perfectly in two planes. The only issue I had was the slight adjustment to one of the screws in a handle so it would spin more freely. I don't think you'll find another unit like this in this price range.

Used on my drill press, it’s not a full blown heavy duty “machine shop” milling table, but works for small simple projects. You need to tighten up the slides as they are loose. Adjustments for such are provided.

It’s ok. Forget about clamping anything using the two nuts, bolts and plates provided. There is too much play in the table adjustments. The slots are too wide and too deep for most T bolts. Not expensive but not very sturdy either. Wouldn’t take much to make it a great product.

Bought this to put an electric bench grinder on to sharpen stump grinder teeth using it with a drill press. Worked great. Just need a larger one with more stability.

Great item fast shipping wonderful to work with great transaction as it should be

The gibs that control the movement of the ways backed off in seconds, and a very accurate table that trammed under a thousandth of an inch over four inches of travel ended up wobbling a quarter inch or more in a few seconds of vibration. I bought a new heavy steel X-Y vise, and I hope it works.

I got it for doing little odd repairs small things it's very good at what it does gives me the idea of running a Bridgeport and it's small enough that I can run it to make the parts I need more accurately

This unit met my needs - to be able to drill lines in a row so I could cut out a rectangular hole in a plastice cover. Placing the unit on a Dremel Drill Stand allowed me to drill multiple lines in a row so I could dut the waste between out. This unit is accurate enough to achieve a straight line of holes. The only downside was initial binding due to a cover over the cross feed screw sticking up over the crossfeed screw and interfering. Accurate enough for my work - I could NOT do this free-hand.