












☀️ Light up your safety game with zero hassle and maximum impact!
The Aolyty Solar Strobe Warning Light is a compact, solar-powered safety beacon featuring 6 high-intensity LEDs for 360-degree visibility. With an IP54 waterproof rating and a sealed design, it offers durable, maintenance-free operation ideal for construction, traffic, and marine applications.











| ASIN | B07FQ737B7 |
| Best Sellers Rank | #72,529 in Automotive ( See Top 100 in Automotive ) #134 in Automotive Emergency Strobe Lights |
| Item model number | A1217 |
| Manufacturer | Aolyty |
| Product Dimensions | 10.92 x 7.49 x 7.49 cm; 191 g |
C**S
Missing the magnet :( which was supposed to be on the box.
T**9
Bought to scare off geese and it seems to be working. It’s decently bright flashing green light that turns on and off with the sun. Works as I need it to.
G**4
The top is not sealed and can be taken off, then it can be sealed with silicone glue. There are two screws in the bottom, take them out, and the top can be removed and sealed properly. I use GE Silicone GLUE, NOT regular silicone. Seal the bottom too. The circuit is powered by a 1.2 volt 800 mAh cell that is soldered on the PV cell. With a full charge (1.38 Volts) the unit will flash all night. The Solar panel has a circuit board that is integrated into the back of the PV panel. It has a couple of resistors and a capacitor and what looks like a choke for, or is the inductor? It also has what looks like a tiny 555 timer, the components are set up similar to a 555 flashing circuit. See You Tube. The solar panel, AA cell & circuit being incorporated into one piece is great. No Wires. The low light "turn on" is decent, charging was at a decent rate, so it has a decent, protected Solar (PV) Cell. The panel is a tight fit in the top but not glued in, it will pop out after you remove the two screws that go through the red holder. The top is solid and the PV cell inside is protected from acidity in the rain. A cell with more mAh could be added. I would go no higher than 1300 mAh. 1.2 volt. Overall, it is built very well, better than most Chines solar stuff. I added a switch leg with a push button switch to the bottom of one unit in the pic. The Switches were bought here. It would be nice if the body were made of glass, that way the sun won't destroy it. The solar lights I build are in glass jars, upside down & silicone glue, they do not leak, fade, or crackle. Switch info: Cylewet 12Pcs 12mm Self-Locking Latching Push Button Switch (Pack of 12) CYT1091. sold here on AMAZON
A**R
Installed 3 of these on 6 ft steel T rail posts and tapped 3/4 in gray conduit over the posts. Post were hammered 3 feet into the ground. They have worked flawlessly since installing, they have been through several big downpours with no problems! Installed these to see if it would stop people from driving into our yard. We live on a slight curve and for past 2 years 5 people have missed the curve and have driven into our yard. Very hard not to see now!! I would definitely recommend these I’ve been using them for over 3 months with no problems.
C**T
This product flashes all night even in freezing weather. Can be seen at a long distance down the road. I use them for lane way markers
Trustpilot
2 weeks ago
2 weeks ago