Spigen Tempered Glass Screen Protector designed for iPhone 14 Plus/iPhone 13 Pro Max [2 Pack]

I purchased this for a new iPhone, and it has been an excellent screen protector so far. The biggest highlight was the installation process. The EZ Fit system made applying it much easier than traditional protectors, with far less stress about alignment, dust, or bubbles. It went on cleanly and evenly, which is exactly what most buyers want. The glass quality also feels very good. The screen remains clear, responsive, and smooth to the touch, so daily use does not feel compromised after installation. I also appreciate that it preserves the premium feel of the phone rather than making the display feel cheap or cloudy. Finger swipes, typing, and scrolling all feel natural. Once installed, it gives peace of mind against scratches and normal everyday wear without drawing attention to itself. This is one of those accessories worth buying early for a new phone. Overall, easy to install, high quality, and dependable protection. I have been very satisfied with it. Five stars.

Easiest screen protector I have ever put on! I used these when I had a 13 pro max and now that I have a 16 pro max they are just as easy to apply. I recommend them to everyone I know. Doesn't get a lot of bubbles, scratches and cracks don't leave glass behind on your hand, it stays smooth. The size is perfect for the phone, doesn't effect the screen at all and I just wipe it with a glass cleaning wipe I use for my glasses.

I've gone through dozens of cheap tempered glass screen protectors and this one gets the job done. The installation process was a breeze. As long as you clean the phone thoroughly and use the included dust stickers, there shouldn't be any issues with install. The alignment tray makes it impossible to mess up. Just follow the instructions and it'll be a perfect fit. Compared to cheaper screen protectors, this one is definitely worth it. I've dropped my phone a few times while hiking and it survived the rocky trails with minimal scratches. The screen coverage is perfect, it leaves just enough room for my case so the screen protect and case aren't touching. It is easy to forget that I have a screen protector with how smooth and clear it is. Definitely worth it's value

*Review is for the iPhone 17 Pro Max* Screen protector installs usually fill me with dread. Bubbles, dust, buying a three pack to finally get it right on the last one - the usual sad story. I was ready for another battle with my iPhone 17 Pro Max. But this time? Flawless victory! The installation process was incredibly smooth and easy. No fighting, cursing or tears, just perfect alignment. It felt like tech wizardry rather than a DIY project. Quick tips for success: > Drop the frame straight down, zero angles. > When you peel the bottom tape, it looks scary...like a bubble apocalypse is imminent. Ignore your fears and trust the process. The included squeegee handles any leftover air pockets like a boss. My tiny top-left bubble didn't stand a chance. The result is amazing: crystal clear glass that feels naked and fits my Spigen Thin Fit MagFit case with precision. The included "install pad" is pretty useless at preventing your phone from sliding around during the install, but the main event is a total winner. Stay tuned for the durability report when my butterfingers inevitably drop this beautiful phone.

I am a fan of Spigen products and decided to give this screen protector, the AluminaCore, a try. The product seemed comparable to others that I have used but with the promise of increased durability. The application was simple albeit the alignment device could not apply the protector straight on my iPhone 17Pro Max. After some adjustments, I could get it close but not perfect. I have been using the Alium screen protectors for years. They are much cheaper but they can be a bit reflective. Protection wise they have been fine. Well, I assumed this more premium Spigen would be better. It is less reflective but not more protective or less prone to scratches. Example: my old Aliums would only ever get micro scratches that would be barely visually after a year or more of use. I take very good care of my phones. They never go into pockets or bags with anything else. This Spigen got a noticeable scratch on the protector within two weeks. I have never had a screen protector get a scratch so easily. Well, I can vouch at the screen. Protector is less reflective than some of the cheaper very inside. Tried, it is not stronger or more resilient against scratching then cheaper competitor products. Sorry Spigen, I am still a fan of your cases and other products but your hype about this alumina core technology making this a super screen protector is an exaggeration.

I purchased two of these screen protector packages (each contains two screen protectors) for the new iPhone 17 Pro Max that both my wife and myself now have. I've used this same product on our previous phones (14 Pro Max and 15 Pro Max) and they are very good. Having two in each package means you can replace one down the road if needed, which I have done several times over the years. Apple continues to improve the durability of their phone screens, but I prefer to install a screen protector to ensure that the phone screen itself does not become scratched over a few years usage. It is very difficult to even notice that the screen protector is in place, once it has been installed, and as far as I can tell it does not affect anything when using the phone. The package includes a frame that you use to install the protector, which makes it really easy to fit it properly. Just follow the instructions to clean the phone screen before installing the screen protector, and to remove bubbles once in place. I have not had problems installing these screen protectors. This is the screen protector I'll continue to use and feel it is a good value and durable.

This makes for a very easy review. Ever since we started putting screen covers on our mobile/cell phones a little over a decade ago, the procedure has been a nightmare. Most of us live in a dusty, dirty urban or dusty rural environment which gives rise to dust and/and or dirt particles in the air—even inside our homes, apartments, condos or town homes. There’s simply no getting around it. So, putting a glass screen protector on an iPhone or similar is practically impossible without issue. Our hands shake and other things we can’t control occur causing the placement of the protector to go onto the phone’s screen off-kilter. In my experience, I have never yet been completely successful in placing a glass screen protector on a phone’s screen EXACTLY as it was meant to be. UNTIL NOW! Spigen has finally come up with the answer. Since my last phone was the iPhone 7+ which was purchased over two years ago, this method used by Spigen might not be brand new, but it’s new to ME and could be new to you. AND IT’S FANTASTIC. Before starting the installation process make sure you have removed the somewhat hard to remove heat-dried thin plastic lining that Spigen lines the outside and inside of the Ultra Hybrid Case (assuming you are using one of the Spigen cases to go along with the Spigen Tempered Glass Screen Protector. Failure to do so will cause you to use the second screen protector provided in the box by Spigen). Following their instructions, this NEARLY eliminates all possibility for error. As always, they provide all the tools necessary for installation; and to that end, Spigen has added an installation tray to ease the pain. Once you have used the wet cloth for cleaning the screen and phone if you desire to, I recommend laying the cleaned phone on a flour-bag kitchen towel because of the lack of lint. Then I use their provided soft microfiber cloth to wipe down any streaks left by the wet cloth and any remaining fingerprints or other debris left that have settled onto the phone’s screen at no fault of your own. After all that is done, I blow my phone’s screen off with non-moist canned air as an added precaution (air not provided). Then you should use any of the four (4) stickers provided to lift off any still-invisible particles before the final stage. Next, peel the cover off the plastic installation kit and place the phone screen-down into the installation case/kit. Turn it over and place the phone now inside the kit on something lint free such as the aforementioned flour-sack towel. The instructions to all these steps are on a small piece of paper in animation form without words. On this now-obverse side face-up, written instructions tell you to push your finger from the top to the bottom of the slit that is carved out of this side of the plastic kit—this helps press the glass screen protector to the phone’s screen. After 30 seconds, remove the tape that covers the slot, and lift this case away from the phone. With the phone face-up, immediately take the non-handled squeegee and from the center of the screen rub toward the outer edges of the screen until the bubbles are completely removed. If after doing this, one or more bubbles seem to linger with a dot in the middle, this is caused by a tiny speck of dust or dirt that landed on the phone’s screen even after you cleaned off the screen. As I said, it’s virtually impossible to live in a completely clean environment. Although it has been the suggestion by manufacturers to lift up the screen only as far as necessary to attempt to remove the small speck, and then lay down the cover again, and use the squeegeee to stick the glass protector back onto the screen to rub out the bubble, I strongly don’t recommend it because I have found that once removed, it never sticks to the screen as well the second time as it did the first time. It’s best to leave well enough alone or to purchase another Spigen Screen Protector and try again. Remember, there are two complete sets in each box. So with each attempt, you always have two tries before being forced to purchase another. This particular glass protector does not lessen any feel of touch by finger or stylus away were it not placed on the screen one iota. Highly recommended for it’s quality and lack of loss or feel of touch, and especially for it’s ease—finally—of installation. Whether or not you purchase a Spigen Case for your Mobile Phone, all smartphones need protecting by a Tempered Glass Screen Protector and with Spigen’s latest case and provided tools to use to install these screen protectors, Spigen has risen above the masses of manufacturers by taking the guesswork of how to place the screensaver onto the screen as well as making it the most foolproof installation—ever!

I have bought Spigen products quite a few times and now it was time for a screen protector for my IPhone 17. Those Spigen screen protectors seem to be the only ones that will give you a bubble-free one, perfectly installed using the included adapter! The excellent quality, attention to detail and good instructions are still like before and their customers service is excellent. Very highly recommended.

J’avais quelques réticences par rapport au prix. Mon frère m’en avait parlé en bien donc j’ai décidé d’acheter cette protection d’écran. Le « sarcophage » fait un peu peur au déballage. Après la lecture du mode d’emploi, on se dit que ça ne peut pas être si simple… Et bien si ! Un nettoyage de l’écran (avec lingette humide fourni), un tour de chiffon soyeux (fourni aussi) avant de se lancer puis un bon coup d’adhésif (fourni) afin de capturer la poussière sur l’écran. On fini par mettre le « sarcophage » sur le téléphone, on presse bien où c’est marqué. On retire la bandelette. Normalement, si vous avez fait l’effort de correctement nettoyé , essuyé et capturé la poussière: vous n’avez même pas besoin d’utiliser la mini-spatule. Tout est centré et sans prise de tête. C’est posé. Si le prix ne vous fait pas peur: je conseille cette protection d’écran de téléphone. Ça à l’air solide et le ressenti du toucher est bonne et la définition de l’écran n’est pas déformé. Facile à poser. 90% de la difficulté revient essentiellement au nettoyage et à enlever la poussière de la surface. Le reste est plus que simple.

جودة ممتازة وحماية قوية

Can't be easier to install and great quality too. Just get one.

今まで色々なものにチャレンジしてきましたが、コレが一番簡単、しかもピッタリと装着できました。次回もコレにします。

Se coloca muy fácil y sin burbujas.