USB ATS Shifter

Works perfectly on my fanatec shifter with ets2, and like you get a spare button too, quality build and solid on my shifter, and long enough cable too

perfect build quality, easy to setup on the shifter, easy to setup in games, recognised straight away, only problem is had was the wire was very long and hard to hide but worked great

Little bit of faffing to get set up but works very well once done with TH8A shifter. A lot cheaper than the US import options. The first one I got was opened/used but quickly replaced. This adds quite a bit more to the 18 speed range/splitter trucks, much better than any 6 speed shifter, you will notice the lower gears actually work with heavy loads / slopes. Only issue is I had to lose a button box to get this working as 4th controller.

Great shifter mode. Works perfectly with American Truck Simulator and European Truck Simulator 2. Feels premium, the buttons give a satisfying tactile click when used. My only small issue, and it is a nit pick really, is that, I use it on my Fabatec gear shifter and, even with the screws and other parts included to secure the shifter mod, it still rotates slightly on the gear shifter stick. It would be perfect if it fitted ever so slightly tighter. Don't get me wrong, this in now way effects how good it is to use. Its a great piece of kit and id 100% recommend it.

A great product but a little expensive. Recommended. Robust switches so should last. Also an easy fit on my Thrustmaster TH8S stick.

Finally, bought different one pc wouldn't recognise it tried everything to get it to work nothing just a paperweight now. Took a chance on this one pc recognised straight away didn't have to do a thing setup the gears and off I went brilliant good quality too.

Very good so far had it a month and still working fantasticly

Very good quality I drive a truck for a living and it feels just like the real thing easy to set up and install on my thrustmaster th8s shifter , makes the game more immersive, would highly recommend

Una maravilla. De calidad, fácil de instalar y funciona perfecto. Lleva el simulador a otro nivel.

Best purchase for american truck,and eurotruck Great quality works like a charm

商品の造りはおもちゃっぽくなくしっかりできてます。しっかりトラック気分味わえます。右手でも左手でも操作に違和感ありません。やはりアメリカントラックのミッション味わうには延長ロットで床から長くしてみたいですね。残念点はVNMシフター経由でdefモードの認識してくれず残念。USB接続するとGAMEEXTENDと出るのですがウインカーのデバイスと同じになり見分けが出来なくなります。windows立ち上げ時にusb認識に失敗します。立ち上ってから接続すればいいんですけど。少し残念点もありましたが、説明書と8-10-12とアダプターもついてます、売り手の真剣な熱意を感じられます。古いデバイスをひっぱりだして組み込んでトラック気分になりたい時だけ接続するといいと思います。ありがとうございました。

Bought this to go with my t300 wheel and pedals because using the paddle shifters as range selectors just felt wrong. Other options for truck shifters like this can be in the hundreds of dollars so felt like this was a low risk to give it a try and it turned out to be great. Shifter was instantly recognized with no drivers. Both switches and the button work perfectly in Euro truck simulator which is what I use this for. Shifter itself feels pretty good. About the quality you would expect from a stock shifter in a fleet truck. Nothing fancy but it doesn't feel super cheap either. No sharp edges or weird manufacturing defects. Switches feel good to click. The only part of the whole thing that bothers me is the bottom which features kind of an ugly unfinished look almost as if there is a plastic trim ring that is supposed to go around the bottom that is not included. This isn't a big deal because it's just aesthetics and I will probably end up 3D printing beauty ring to go there eventually. Mounting was relatively easy on a fanatec club shifter. The threads of the knob do not match up with the shifter so for a while I was forced to use the included grub screw adapter. The included adapter worked okay. It comes with a variety of rubber caps to go over your shifter to stop you from marring the threads and they did that job just fine. Unfortunately, the grub screws kept loosening themselves with use, so after pretty much every session the shift knob would be floppy. The adapter also adds additional height to an already pretty tall shifter which felt slightly awkward. I scoured the internet looking for a thread adapter and while I was unable to locate any on any of the usual sites including McMaster, I was able to track down the exact thread adapter I needed that was even the perfect length I needed from a Chinese seller on eBay. A couple weeks later it showed up at my door and I threaded it on and it went mostly perfectly except for when it was fully tightened the indexing of the shifter was off so it was about 90° too far to the right. Luckily I was able to 3D print spacer to fix this issue pretty quickly. So now my shifter sits perfectly centered on the shaft and is at the correct height. Overall a pretty great experience for the money, especially if you're willing to do a little tinkering. Construction seems pretty good. The cable is literally just a Microusb cable plugged into the control board inside the shifter. So if the cable ever goes bad you can just change it which is really nice actually. It also seems really serviceable as all of the parts seem like off the shelf components and are easily accessible by simply popping off the cap, so if any of the switches ever start going bad you can probably just swap them out for a couple bucks versus buying a whole new shifter.

Si la vdd me gustó mucho y es súper fácil instalar