BDK PolyPro Car Seat Covers Full Set in Solid Black, Front and Rear Split Bench Seat Covers for Cars, Easy to Install Car Seats Cover Set and Accessories for Auto Trucks Van SUV - Solid Black

Very good for the price, however difficult to tie down the seat to keep in place, so just covered the seat without straps and it fits ok, looks ok. Slip resistance could have been better. The color matches the photo too.

Love these! Fits my 2020 Kia optima pretty good. The back seat don’t fit that good but suffer and passenger fits great and looks great! Backseat though I’m iffy with it

These fit for a Hyundai Kona '23 pretty well! Be careful when you put on your seats. One of the head rest covers tore slightly when placing on, but I just fixed with some needle and thread. You have to cut holes for the seat belts and the head rests in the back. They're not "perfect" but they are decent enough for universal covers and match the price point in terms of quality. I'm going to continue to use. I found them easier to put on my seats than previous universal seat covers I bought, so it didn't take long to get them in my car. For my Hyundai Kona, the head rest cover for the middle seat in the back - it is quite loose on the head rest but again, for me they work for what's intended : protecting my seats and giving my car a little personality (I got the purple covers)

Review applies ONlY to my experience with installing these seat covers on a 2024 Toyota RAV 4 Pros-price point, does not smell like chemicals, customer service responds quickly to emails, passenger seat cover fits just fine and was easy to install. Fabric is comfortable. Poured capful of water and it soaks in but it still felt dry under the cover. Cons-Driverside cover is difficult to secure under the seat, but not a deal breaker for me. Headrest covers all the same size, so it’s baggy on rear headrests and there were only 4, so I did not cover the tiny middle headrest. Seat covers are secured behind the tear seat, but that is not possible with the rear bucket seats as the fabric is sewn to the back and runs down thru the trunk. Customer service responded quickly to my 2 emails but I was advised to unhook the back cover (it’s sewn in) and then advised that their customers often just tuck the edges in instead. That did not work for me with passengers and dogs, seat cover was messed up in a day. Seems to attract more dog fur than regular seat but, if you consider that “grooming”, that would be a plus. Appearance is fine, no smell, box arrived damaged but product was intact in a plastic bag, don’t forget to note the instructions about the front airbags when installing. That’s important!

First off, I did not end up using the clips. I mainly have the trunk down because I am a fur-mom x2 (no 2 legged children); except for the neighborhood kids I take to church on Wednesday and Sunday, then the seats are back up in the sitting position. Back to the clips! Seeing as I have the seats down and pups in the back (American Staffordshire Terrier and Blue nose pit) I didn't want them walking on them, so they don't hurt the paws or snag on the felt interior. Also, the last picture I put a trunk cover down and didn't want that torn. For the non-dog car rider people these clips go at the end of the elastic and it was tough for me to pull the elastic under the crevice of the seat and trunk then stretch and clip. One end is the loop the other is like a tighter L-shape and I would use pliers and close them into each other to fasten more securely. The clips work but not sure how long it will stay and not pup moving the seat from up to down position. Therefore, I secured mine with zip ties! They seem to fix it all just like electrical tape! j/k. The zip ties wont hurt the pups paws; I could give it more slack in the stretch attachments that come on the seat covers and it doesn't feel so tight that it is gonna rip them. To be honest; that was my hardest part. Getting the backseat part on and then making sure they were nice and snug around the back part. Oh, and the front seats have a velcro snap to secure under the seat. Have to go under both sides of seats and feed them through the seat adjuster then velcro it. The part about removing the headrest and cutting small holes to fit the headrest back over and also cut holes for the seatbelt snaps was easy. For the head rest cut a small pinch out about the size of a dime and that is perfect to fit it nicely. The seat belts about the size of a quarter and you can wiggle them through and if it gets too tough just cut a tad bit more and they fit nice. My front seats look a little baggy in the picture because I have arm rest on my seats. I am going to got back and do the same like the headrest. I will remove the arm rest; pull the car seat cover into place taunt and then cut a small hole and put the arm rest back on. I was just getting tired and the rain was coming. Otherwise you could just cut a vertical line long enough to slip around the arm rest bar and down to the bottom of seat but that could be a lot of material cut versus a small size dime hole like the headrest. I also purchased the product for less than the NEW price. I picked the like new for about $13 dollars and they look brand new? I don't know if it was because the box appeared opened then taped back but mine look brand new and had no cuts or tears in them. What a deal! Item arrived quickly packaged nicely with no damage. Again, budget friendly for my fixed income disability budget. Seats are protected from dog hair and a quick spill of a drink if it happens. Got them in my favorite color too! Very pleased; would order again.

I am very disappointed. I knew this was an inexpensive option but the fabric is terribly cheap. Not only this, but the claim it “fits” my 2008 Yaris is dubious. Sure it will go on my seats, but it is bunchy and loose. It does not look nice, no matter how I pinch and tuck and pull trying to take up the slack. The worst part however, in order to use the back bench seat cover, you have to cut holes for the head rest posts and safety belts. This means cutting into super cheap fabric that will then tear and fray more. If you cut too large of a hole you have a problem so better be careful there. I would expect a lot better quality for a product at this price point. Even at $30, it was not a worthwhile deal

Fit and Compatibility Vehicle: 2017 Ford Focus I recently purchased the BDK PolyPro Seat Covers for my 2017 Ford Focus, and I couldn't be happier with the fit. They slide right on and look like they were custom-made for my car. The front and rear split bench seats are covered perfectly, giving my car a sleek, updated look. Installation Ease of Installation: Easy Installing these seat covers was a breeze. The instructions were clear and straightforward, making the process quick and hassle-free. It took me about 30 minutes to get everything set up, and they haven't budged since. No need to wrestle with them or constantly readjust – they stay put, which is a huge relief. Material and Comfort Material: PolyPro (Polyester blend) The PolyPro material is soft and comfortable, making every drive more enjoyable. It's breathable too, so even on longer trips, I don't find myself sticking to the seats. The fabric feels durable and high-quality, which gives me confidence that they'll last a long time. Durability and Maintenance Durability: High These covers are a fantastic shield against spills, stains, and the general wear and tear that comes with daily use. I have a dog who loves car rides, and these covers have held up great against his claws and the occasional muddy paw print. They're easy to clean – a quick wipe with a damp cloth usually does the trick, and they're machine washable for deeper cleans. Aesthetic Appeal Design: Gray on Black The gray on black design is stylish and modern. It blends seamlessly with my car's interior and gives it a refreshed look without being too flashy. I’ve gotten a few compliments from friends who’ve noticed the upgrade. Price and Value Value for Money: Excellent For the quality and convenience these seat covers offer, they’re an excellent investment. They provide a cost-effective way to protect my car’s seats while enhancing its interior look. Overall Impression The BDK PolyPro Seat Covers have been a fantastic addition to my 2017 Ford Focus. They fit like a glove, are easy to install, and offer great comfort and durability. The gray on black design adds a stylish touch that I'm really pleased with. Overall, these covers have exceeded my expectations, and I highly recommend them to anyone looking to protect and upgrade their car’s interior. Rating: 5/5 These seat covers have truly transformed my car’s interior, making it feel fresh and stylish while offering practical protection.

The covers did not fit my car even though Amazon checked and told me they would. That is my major issue. I spent at least 2 hrs trying to get the backseat covers to rest in a natural place on the seats; I even used the hooks provided which bent after normal use (see picture). Still, they would not fit. I needed to be able to put the straps through the seat between the back and seat, but my car doesn't allow for that. Aside from that, the seat covers themselves have a little foam to them to increase comfort, but the stitching is subpar. At the slightest tug while trying to apply them, the stitching on the edge's rips. Similarly, you must cut holes in the backseat for any headrests as they are not precut. I understand the want to be versatile in design, but it comes across as tacky and cheap in my opinion. The ability to unzip sides of the backseat to allow a side to fold down is pretty neat and could be very useful. It does add to the complexity of putting the covers on in the first place, however. Additionally, the smell of the fabric is very minimal if any at all. Based on the material type, I imagine these would not be particularly good at preventing liquid stains and would be somewhat difficult to clean well as the fabric is fairly porous. Overall, I think these covers attempted to be versatile, but, in the process, made the product less user-friendly and of lower quality than its competitors. Although, what can you really expect for their price?

Let me start off by saying, For the price your paying, it will work well enough. I installed mine on 2009 Tacoma crew cab and if you have one you know what the rear seats are like. The product fit ok on the front, it will do the job. Has the marking for side airbags. Now for the rears, the zipper back to the seats and the minimal cutting you have to do for seat release handles and head rests aren’t that big of a deal unless your a moron. I did have to cut a extra spot for the middle seat belt. The bottom for the rear seat IS NOT 2 pieces, it does fit well, just a pain to flip up both bottom seats for the storage, or you can reinstall the bottom cover every time you open it for storage. The rear back seat cover tie downs are kinda a pain to set up, it’s a goofy ass hook system and once again, if you own a Tacoma you know the rear seat backs have hard covers so nowhere to hook onto. But if you hook them all together or too them selves it holds well enough, although don’t pull to hard because they tear off easily. Like I said before, for the price it’s not a bad product, but it’s a cheap material so expect to replace them. I’d give it a 3.5 out of 5

Gillade

Comme on dit, ça fait la job! Vos bancs sont dans un sale état? Vos enfants ont échappé du jus, de la liqueur ou une partie d'un repas! Même après avoir payé un lave-auto, nettoyé les bancs en profondeur, on voit encore des cernes de café, de la sauce BigMac et des traces de jus rouge? Vous êtes gênés quand des invités s'assoient dans votre véhicule? Cet ensemble de housses est une solution à prix modique. Vous aurez sûrement un tour de rein après avoir installé la housse du banc arrière, mais les vestiges crasseux de vos enfants auront disparus! Attention, elle est facile à déchirer lors de l'installation. Ne tirez pas trop fort sur les élastiques. Si ça ne se rend pas où vous voulez, recommencez, mais ne tirez pas! Sinon vous aurez une déchirure... :( La housse ne se déchire pas quand elle est bien installée. En plus, elle est lavable! Si fiston échappe encore son lait au chocolat, pas de panique. On enlève tout, on met ça dans la laveuse et le tour est joué. Pour le prix, c'est correct.

These seat covers were extremely simple to fit in my Suzuki Grand Vitara Sport. I was dubious after reading all of the negative reviews, however the instructions were very straightforward and it was not at all difficult to fit the seat covers, so I don't know what people were complaining about. Cutting holes for the seatbelts also was not an issue. I found the straps were sturdy enough unless you put undue pressure on them, and the covers withstand our large dog sitting in the back seat. All in all, very happy with this product for the price.

Facile à installer, bonne qualité perçue.