SP999 Nite-Shades Lens Cover Tint Translucent Black Paint Can - 10 oz.

Vht always a good product not legal in AUSTRALIA road use

Covers well and produces a very nice translucent effect.

Works very well. Did three coats over the clear part of my lenses. It looks good but was a different shade from the factory red. I pai td over that part with two coats a d it looks li,e it came that way. Highly recommend.

Some vehicles you can't just buy a set of GTS light covers for. Or you spend 3x what a stock light housing is to buy a custom ones. The VHT lens tint is a cheaper way to get a custom look. There are a few ways of painting your light housings, but I would rather remove the light housings off the vehicle in sted of masking half the car to keep the over spray from getting on your paint. Plus you can get a better even coats of paint when having all the parts in front of you. I did the taillights on my 05 Mercury Grand Marquis, including the lenses on the trunk hood. I first cleaned the lenes with wax and greas remover. Masked off the areas I didn't want the spray tint to be painted on. Gave all the paintable areas a light wet sanding with 600 grit sand paper. Now the lenses have a dull look to them.Now youjust gave something for the spray tint to grab on too. Clean again with wax and greas remover and wipe dry with a clean rag. Look to make sure there is no dust or hair on the parts you are painting. I found 3 light coats of VHT lens tint is more then enough, but if you want darker add a few more. With the parts laid out in front of you and clean, spray light even coats on all parts. Make sure you put the same amount of spray tint on all parts or one part will look darker than the other. Your light housings will look like they have a gloss to them. This tint will dull out to a flat black. If you are looking for a flat look, like your car is a flat black this will work for you. I like the custom look so I bought the VHT SP515 Quick Coat Clear Acrylic Enamel. If you use this clear, when the tint is dry to the touch but not harden give them a light coat of the clear. I did 3 light coats of clear, spraying when the clear was tacky. Let dry over night and put the lenses back on the vehicle. Remember the more coatsof tint, the darker or harder it will be for others to see. Also, check with your town or state. Might have laws against lens tints.

Easy to use - looks top notch! Durable and instantly changes the look of your lights. Highly recommended!