UniqueMe [2+3 Pack Compatible with Samsung Galaxy S21 5G - 6.2 inch Tempered Glass + Camera Lens Protector Screen Protector with Easy Installation Frame[9H Hardness][Not for Samsung S21 Plus]

I've used quite an array of different screen protectors over the years. Some were pretty good while others were just a waste of money. This kit has to be the best experience I've had with installing and using a screen protector. I invested in this kit about 4 years ago. It came with (2) glass screen protectors. After the usual anxiety I experience when having to install one of these I mentally prepared myself, watched the online installation video and proceeded with the install. I was easiest installation of a screen protector by far and the kit included everything that was needed to ensure a smooth and easy installation. As far as durability, I am usually pretty careful with my phone but of course I did drop it a few times. The protective glass did develop some minor cracks in it but the phone was still usable and was in no way any kind of inconvenience. Just recently, after about 4 years it started peel a tiny bit on the upper part of the screen which was made worst over time from the downward swiping motion. While still fully functional it became a bit of an eyesore and then I remembered that the kit came with a 2nd screen protector. I just watched the installation video again and followed the steps to replace it on the phone. The process was a piece of cake and now the screen on the phone looks brand new again. The kit also came with a glass protector for the camera lenses on the back of the phone which I originally install. The original one is still in place and in perfect condition so there was no need to replace that even through the kit came with (2) extra covers for that. Factoring in the long term durability, the fact that they provide a video for installation instructions, and the kit is designed for and makes installation a breeze, giving this a 5 start review is a no brainer and why I took the time to wrote this review.

Pros: - INSTALLATION. There was a bright orange neon frame that came with the screen protectors that made it SUPER easy to install. I did not watch any videos, although I've owned quite few phones before (each with their own screen protector) so I am well-versed on installing my own. However, the frame literally makes it impossible to install this protector crooked. - THE FEELS (for a lack of a better word to describe it.) I don't know what it is, but this screen protector feels "soft" compared to other glass protectors I used. I compared it with another screen protector on an S20 FE (which also has a 90 hz screen), and this one just felt softer and smoother, almost like I was touching directly on the screen itself. (Disclaimer: For the three days I was without a screen protector, I would also describe the glass on the phone screen itself as "soft" and "smooth.") (MINOR) CONS: - CAMERA LENS PROTECTOR. The glass for the camera lens is awful. I carefully installed it then turned on my phone camera immediately (it's a bright and sunny day.) The camera app itself immediately told me to clean the lens, and stationary objects on the screen had a sheen/shine to them, which makes sense since the protector glass seems to be of sub-part quality in comparison. Note that the only sticky part of the lens protector is a thin strip around the edge. - FINGERPRINT NOT AS SENSITIVE. I'm NOT saying it doesn't work. I had the fingerprint sensor in my settings turned on to maximum sensitivity PRIOR to owning any sort of protector, so a light tap would normally unlock my phone (and a slightly harder one guaranteed it.) This is in line with some of my older phones that did not have in-screen fingerprint readers. After installing the glass and re-registering my fingerprint, it requires a much harder press/multiple presses to unlock my phone. I do find this kind of annoying but I doubt there's a solution given that an extra layer of glass is going to come with sacrifices! Overall, my gripes are minor. I gave this five stars because I got exactly what I wanted - a screen protector that works and feels great. The extra camera lenses were a bonus for me that I didn't need, and I can't see them being a good idea for ANY phone camera, regardless if it was an S21 or an iPhone12, etc.

Easy and simple to apply. Looks amazing, fits perfectly, and good quality Only conventions are: there was only two wet wipes to three screen replacements and the back lens protector adhesive protector was rather difficult to remove. Once applied, sticks lovely and still worth it.

It's important to get the correct size since not all models of the Galaxy S21 are the same size. This product , when I chose "S21 (6.2 inch)", fit my phone, which self-identifies as "Galaxy S21 5G" with model name "SM-G991U1", perfectly. The kit has three protectors and my first attempt produced a flawless result, leaving two more in the box. My previous technology was a "wet process" with a TPU protector. It invariably took four tries to get one without bubbles. And then, when a case was installed, edges and particularly corners would come up. With this product, my first installation produced no bubbles. (I'd look at both the video referenced on the product page as well as the vendor's videos on YouTube as they emphasize different things.) Unlike the wet process, which required several minutes of squeegeeing, this product magically self-adheres! (I did have to initiate that process with my finger.) It then left a small bubble I quickly eliminated with the squeegee. The wet process requires overnight drying before installing a case and I followed that protocol for this one as well although it's not mentioned in the instructions. I now suspect that was unnecessary. In any case my JETech case has not caused any problems with the protector and I don't anticipate any future problems. Because the plastic alignment tray provides such precise positioning on the screen, there is a tiny line betwee the edges of the protector and the case itself, protecting the corners/edges from turning up. Initially I could not get biometric fingerprint scanning to work. However, about a month after installing, I could. Perhaps this interval of time somehow helped. I much prefer fingerprint scanning to face recognition as the latter seems not to be used as authentication for apps. With two more protectors in the box, I fully expect the protector to last the life of my phone. I have finally found an effective screen protector technology and will buy this brand for all future phones.

Super easy to install. Went on like a dream. No bubbles, no squeegie-ing (obviously, not a word), no muss, no fuss. Adhered to the screen beautifully. The camera protector bit was a little more tricky, but again, once I got it correctly positioned, went on without a flaw. Easy to reposition, by the way, which I had to do a couple times due to my old shaky hands. ;) This screen protector seems very substantial compared to the one that came with my husband's phone case. (It better be--he works a physically demanding, filthy job and his poor phone will need all the help it can get to survive!) Here's hoping it lives up to it's appearance. ;) Two of each type of protector came in the package, which is a really nice perk if either the first protector or the camera protector sustains damage. The case I bought with these protectors seems very well constructed and thoughtfully and practically designed, so here's hoping they'll team up and save me from having to buy another phone in a few months. :)

First off, the installation was flawless. If you follow the instructions about cleaning and installing, you almost won't need to squeegee out air bubbles - it'll tack itself down. I had one bubble near the camera and it came out easily. The surface seems to repel fingerprints and keeps the screen looking sharp, unlike some film screen protectors. Not sure about the rear camera protector yet. There is an air gap between the protector and the camera glass, which will probably add glare. The fingerprint reader on the screen becomes nearly useless. I cleared my old prints before installation, turned up the sensitivity, then went to re-register my prints. It took 2-3 minutes each and I got repeated "cover the entire sensor" warnings in the process. After registering, the sensor will normally fail 1/2 to 2/3 of the time, so repeated tries are usually necessary to unlock. Without the protector, it unlocked 90% of the time on first touch. I think this is a function of the glass being too thick to let the fingerprint sensor work right. If you like unlocking with prints, you may want to look elsewhere. I don't know if any 9H glass protector will be compatible with the S21's fingerprint sensor. I'm going to try it out for a few days and see how it goes. I might be able to get by with facial recognition most of the time. I usually use fingerprints to unlock when driving, so if the facial recognition doesn't work well enough there, I may have to peel this one off and try a new one.

Buy it! Fingerprint works. You have to add your fingerprint with the protective screen attached. Everything works as described. Thank you for an awesome product!

I figured the privacy aspect would work moving the screen all ways but only works side to side. Not to mention they sent me the wrong one lol I ordered the black rear camera cover and they sent the clear one instead): other than that, the installation was easy enough.

Lo resistente que son las 2 micas

These are great screen protectors easy to install if you just follow the directions. Some people mention the fingerprint reader not working properly you need to go into your display settings and turn your touch sensitivity on this will increase the sensitivity of the screen it's for use with screen protectors. I often program in my same fingerprint twice in the biometrics and have zero issues unlocking my phone first try every time with fingerprint. No moon where the fingerprint reader is like with some screen protectors. If you use a spigen tough armor case you will get edge to edge coverage. Overall a good buy very happy with this purchase. Having the frame that pops over the phone makes installation super easy and perfectly aligns the protector. You need to make sure that there is not a single speck of dust on the screen when you install the protector or you will get bubbles. Clean well with the alcohol wipe then the microfiber cloth. Then use the dust removal stickers to clean up any and every speck of dust this part is crucial. No dust no bubbles it's that simple.

Llevo varios meses usándolo, cumple 100% con su cometido. Si te importa la privacidad, este es tu producto.

Perfetta!

Die Installation ist, dank der mitgelieferten Schablone, sehr simpel. Ansonsten funktioniert auch alles wie es soll. Die Fingerabdrücke müssen neu angelernt werden, aber die Berührungsempfindlichkeit musste ich nicht erhöhen. Ergo, passt.