Incredible Solutions Pourable Plastic Deep Pour Up To 2" Thick USA Manufactured Clear Casting Resin 3 Quart Kit Perfect For River Tables & Castings – Low Odor Epoxy, a 2:1 Ratio

I used this for an epoxy river table. It worked great, was crystal clear, and dried hard. A few tips: -This is very thin - it flows like water. If you have any leaks, it may all leak out. I did an initial pour of a small amount and tilted the table so it flowed into all corners and cracks. I let it cure for ~18 hours to partially harden and seal any leaks. Then I poured the rest. -Make sure your table is exactly leveled. This epoxy will level itself fairly perfectly, so any tilt in the table will result in unevenness in the thickness of the epoxy. -This takes a couple of days to "harden". It may be unnecessary, but I gave mine a week before putting it into use. If you are uncertain, save some epoxy in the pot you mixed it in and test its hardness by pushing a fingernail into it. -If you want swirls in tinted epoxy, it needs to be done when the epoxy gels. At the temperature I was working at, it took about 12 hours. I used mica-based tint, and it seemed to settle just a bit. So when I gently stirred the epoxy, it came out with nice swirl patterns. You must do this very slowly or you risk getting bubbles that will not come out. Definitely test on a scrap piece to see how long you need to wait, and how gently you need to swirl. Keep checking on it (and maybe re-mixing) every half hour since the swirl pattern can start to settle out even when the epoxy is gelled. You can also try mixing in another color, but I haven't tried this yet. -be careful of dust. This product is so mirror smooth, any dust landing on sticky epoxy can be visible in the finished product.

I ordered this to make live edge cutting (Charcuterie ) boards. I’m not a wood worker, so Its just learning for me. I ordered this based on reviews and price point. First, it pours just fine. I didnt use a funnel or anything other than 1000ml plastic cups. They have measurements on them. Second it mixed well with a silicone paddle. I was able to make three boards with this, although i did over mix on each of them. I covered the entire surface of my wood each time. This mixed well with the pigments I purchased with a few questions. I have not dialed in the right time frame to get the right swirl pattern. One session settled quickly. This seem to cure the best around 70-71 degrees. However it took a full 48 hours to harden and most I let sit for 72 or more before finishing. They polish well to 2000 grit, and upot further inspection I believe I should have sanded and buffed more. These did not surface well through the planer we used. Believe me when I saw this is a professional quality 20” carbide tipped planer. We instead built a router jig and that did the trick. Overall I am pleased. Check the photos for the output.

I bought a gallon to make a memorial for our grandmother who died last year, so picked up flowers from her funeral and dry them. I made this for my mother in law, but the other sons loved it so I decided to make more. So I bought another gallon and right from the the beginning something for not right. The epoxy was cloudy and I had to put it in warm water for the cloudiness to go away. Talk to customers service and they said that I was probably storing it in a cold place wich I wasn't (I have had worked with epoxy before and I know how store it and work with them). I also sent and email to the manufacturer and they never responded. Now I am very upset because I ruined the last flowers I had and the project came up horrible. Not going to purchase this again cause you never know how the product is going to be.

Easy to mix, low odor

I needed it to thicken up to work worth it easier, but it's nearly impossible to get this to thicken up. I tried letting us sit for over an hour, I've tried adding baby powder, I've tried adding heat... still really liquidy. My practice peices turned out pretty nice, but for something that was maybe ¼" thick I had to let it sit for 2 days before I could take out of the mold & it was still a little bendy. I do not plan on buying this again, it just doesn't do what I'm looking for...Shipping was fast & products arrived well packaged.