MOTO4U Portable Wheel Balancer Rim Tire Balancing Weights Universal Motorcycle Bike Motorbike MX Wheel Balancer 35CM

I concur with others’ observations indicating both difficult to roll bearings & the shaft materially narrower than the cones. However: Bearings cleaned up well after an overnight soak in WD-40 & are up to the task. The balance issues associated with the undersized shaft were overcome with a 5 gram weight (a little more than 1/8 of an ounce) after the bearings were cleaned. This can easily be addressed once known &, IMO, does not diminish the value of the product. The product is not only effective & easy to use, but it also packs down well - this is key since it’s only used occasionally (packed away most of the time).

I bought this as a backdrop for selfies at my son’s western themed wedding. It was well worth the price and looked great. Would definitely recommend it

I used it today on my KLX300's front and rear wheel. The bearing holders fit my stand and the spindles locked in place just fine. I got both tires done in short order.

zero stars, product is USELESS, the reason is the holes in the tapered cones are much larger than the long rod/bar, so when you tighten the set screws on the tapered cones it pushes the bar off center, most people would not even notice this, and what then happens is the wheel is off center on the rollers, and when you try to balance the wheel it will indicate that one side of the wheel is way way heavier than the other (FALSE reading), then you would add a bunch of wheel weights where they are not actually needed, now you have made your wheel balance so far off from where it should be, so after you have worked to remove the wheel from the motorcycle, and done other work, such as new bearings , or possibly a new tire, and spent time to re install on the motorcycle , this item will have caused you to make your wheel so out of balance it will be dangerous to ride, this item will end up causeing you more time and money to correct the problem it casued tha its worth, IT Does Not, and Can Not do the job it is sold to do.

Make sure it fits your paddock stands. It is built really well, and the idea is great, really well done. It just didn't fit my stands is all. If I get some different stands that it does fit I'll be back!

Great kit and built really well. Problem is the shaft diameter is to small for the cone collar. The cone is pulled off center when the allen set screw is tightened making the kit useless for balancing. Kit would be a great value if they had included the proper size shaft.

Easy to setup and use.

Very good unit, cost me a lot less than most other balance/truing stand parts

I got what I was looking for.

I ordered this because i needed it for a job quickly - the item arrived quick, the shaft was true and straight however the set screws in the cones where so tight that i only got one open.... snapped my MacTools Allen key on the first one, then broke a driver bit Allen key in the hole trying to get the set screw out. Ended up cutting the cone on the lathe... absolute brutal! Not worth $50 when you have to modify the parts before you can use them.