[4 pack] Samsung Galaxy Note 20 Ultra Screen Protector - TPU Film Screen Protector for Galaxy Note 20 Ultra 6.9 Inch, 2020 [High Definition] [Bubble Free] [Anti-scratch] [Anti-Fingerprint]

I'm using this on a Samsung Galaxy Note 20 Ultra 5g. Although it's a nice phone Samsung could not have made it harder to protect if they had tried. The screen is huge and extremely curved at the edges. The fingerprint sensor is located on the screen and is quite finicky. The rear camera module is huge and protrudes so much that the phone wobbles when it's on its back. Although it appears that Samsung has a factory screen protector on the phone when you buy it in some countries that's not the case in the US - it comes without a protector. I would have rather had a tempered glass protector, but every single one even the very expensive ones had reviews complaining about the fingerprint sensor no longer working and problems adhereing to the curved edges, so my only option was a TPU protector and I went with this one because the price was right and all the install accessories it came with. I've always had terrible luck applying TPU screen protectors, but I watched the video they direct you to and followed the directions. The result is that for the first time in my life I have a screen protector that is perfectly aligned and looks great - and since there are 4 to a pack I have 3 more left in case it wears out or gets damaged. Here are some hints based on my experience: (1) Watch the video - this is easy to do, but it's a multi-step process and you have to follow the order of steps. (2) The black foam piece that you place the phone against is needed for a good install, BUT be careful where you place it. The glue on the foam piece is a bear to get off when you remove the piece, so make sure you don't destroy an expensive piece of furniture. The foam is also not quite high enough for the Ultra AND the Ultra itself doesn't lie flat on a table surface because of the camera module. I solved that by placing a soft micro fiber under the phone so that it wasn't wobbling. (3) When they say to press hard they're not kidding. Also at least on the one I used the green edges never just came up from the pressure, I had to reach in and get them started. (4) When I was done the alignment was great, but there was a line of small bubbles in the middle which I couldn't get out no matter how hard I tried to push them to the edge. I was not a happy camper, but after about 7 hours they just went away by themselves, so there's no bubbles on it at all. The fingerprint sensor works as well as it always did (I increased the touch sensitivity but it really isn't necessary to do that), and the display looks about as bright as it did before, and the feel when using the S-Pen is about the same as before. I don't think TPU screen protectors protect as much as tempered glass ones do, but until if and when they make a protector that works well with the Ultra this will keep the screen from being scratched, looks great and the price was really low. I don't know how long it will last (I've only had it a day), but since you get 4 in the pack and the price is so low I'm set for a long time.

Very easy to apply with no bubbles the 1st and only attempt! Followed included, clear instructions word for word. It worked!

Trying to put a screen protector on a curved screen has always been a challenge. Either its hard to get it to line up, or the edges don't stick or you get air bubbles. Omotion has mostly solved the above issues but it could still use some work. Their process of lining up the screen protector and applying it is pretty nice, but the problem arises from the huge camera bump on the 20 Ultra. Because of this it doesn't sit flat on the table which causes difficultly when using the included bumpers, if you get a little help friend from a friend you can get the protector on clean with no bubbles. I've used the screen protector with both a Spigen Neo Hybrid case and a SUPCASE Unicorn Beetle and neither of them had any issues with the protector. My only real issue with the protector itself is after a couple months the sides seem to peel up and I have to put on another one. Luckily it came with 4. Also Omoton has some good customer service as when I ran out they sent me a new pack of 4. I can't really comment on how it effects the fingerprint reader as I was never impressed by the responsiveness of it to begin with but it does work, it just seems to require multiple presses.

I'm pretty picky about screen protectors. I look for the following: 1) Ease of foolproof installation 2) If it's not glass, holding up well without getting all gnarly creased from use with my Note stylus 3) Smooth to touch, smooth with stylus 4) Sticking to the glass This thing rocks on numbers 1, 3 and 4. Its method of installation is brilliant and almost idiot-proof (which I need). If you can't get this on your phone without bubbles or dust beneath it, you haven't followed the instructions. Even better, there's a simple, understandable included instruction sheet. You don't have to go to Youtube and watch an installation video. You can READ the instructions, look at the pictures, and just do it. Moreover, you don't have to spray water on the glass, the protector and your fingers and you don't have to try to squeegee liquid out and wait overnight before putting your phone in a case. Honestly, I don't know how this screen protector will last. Will it get grooved by the S-Pen and become a ridged mess like most other TPU screen protectors I've used? I don't know. But if it lasts at all well, this will be the only screen protector I buy in the future. I thought I'd found my lifetime screen protector when curved tempered glass protectors with UV-cured fluid attachment came out several years ago. But over time their glue would crack, making a spiderweb look beneath the tempered glass of the protector, and the process of installation was always dicey to get right. After several broke through contact with my case I decided I was done with them at $40 apiece. This is a bargain for a great protector. If it doesn't last well, I'll update this review. But right now, I say buy it for your Note 20. (Update, two months later I'm even more convinced this is the best screen protector I've ever used.)

It's been a good year or so since I last installed a screen protector and although it wasn't impossible, it was, for me, a decently frustrating experience. Having trouble lining it up with the screen, doing it quick enough to keep dust out, still ending up with micro dust and then annoying bubbles and end up having to let it "set" for hours. But they worked well enough. So I'm not sure if all screen protector technology has changed over the last year or not lol, but this was a very new experience and I was left very impressed with the process and ease, as well as the result. The little tools included help very well with lining up as well as a bumper for your phone so you can use both hands to work. So that solved that problem then the way you "spread" the two halves without even touching the inside protector side makes sure you have less chances of adding in dust or lint. Not only that but it also apparently solves any bubble issues as there were absolutely none for me, even though they include the tool to squeeze them out if needed. And then that was it! And it was ready to instantly use. It looks great, feels really nice and seems to work really well with the fingerprint reader. It's only been a few days but so far I love it! And it came with 4 total so even if it breaks down or something it's easy to throw another one on. My only semi-complaint is I believe these might be designed for another phone as they are just a tiny bit short on the length. Not much at all, and not enough for me to even feel the need to knock off a star rating, but just a heads up. My guess is maybe they were originally designed for s20 or regular size note 20 or something and then since it was very close they just sold out for note 20 ultra. I don't know for sure, and again, it's not much at all (see pic) but the only thing I could say is a negative so far. PS go watch their install video on how to do it. The written directions are not great, at least for me.

I may be bit biased probably because I have used tempered glass screen protectors for years. But lately those have failed my needs, so I decided to try this since I saw good reviews both on and off of Amazon. The install was easy (watched the video), though the film didn't line up exactly with the screen (there is a small gap at the bottom), but I could overlook that. It feels fine, none of that sticky-plastic feel, very responsive and the finger-print reader works like a charm. Day 1 it looked great. No bubbles or dust trapped. Day 2 I noticed 2 small bubbles at the edge, but I was able to squeegee those out. Day 3 I'm noticing the corners at the top are starting to peel up slightly. I used a credit card to gently push those back down. We'll see how long this holds, but only being day 3 and seeing some peeling, I'm not getting my hopes up to high UPDATE: day 4. Woke up this morning and the top left corner is severely peeling up. Happened overnight while the phone was not in use. Seeing this, I don't expect this screen protector to last more than a few more days.

This is a true perfect five-star product. No hyperbole. At first I was intimidated by all the pieces that were included in this kit. Instructions were clear but I still prefer visuals to learn so I followed the link to the YouTube tutorial. Watch the video. It makes it so much more helpful. Go to YouTube and type in "OM M11" and it's the first result. The video makes much easier to follow than the written instructions and by following the video, I got the screen perfectly aligned on my phone on the very first try. Not only that but with zero air bubbles. ZERO. 2 things to do before putting on the screen protector: First, I had to remove my phone's case because the sides were blocking the edges of the screen. Second, I put on latex gloves that I already owned not for my greasy fingers to keep staining the screen after I cleaned it with the included alcohol pads. It comes with 4 pads. I only needed 1 pad so I have 3 pads left if I ever have to apply the second screen protector that comes in this kit. I wish I could rate this product higher than 5 stars. It is truly perfect. There's no annoying fingerprint image on the lower part of the screen like some other brands have. Yet, the fingerprint reader on my phone works perfectly. It's like the screen protector is not even there. I didn't even have to recalibrate my fingerprints. The entire plastic is clear with no markings (pic1). Second, it was a perfect fit and had NO air bubbles thanks to the included scraper tool which let me put the screen on perfectly the very first time The 1 thing that you should know is that this screen protector is NOT glass. It is a type of flexible plastic. I don't know if the listing says the word glass anywhere but yeah, this is not rigid nor glass. I'm really happy with this purchase. I can't believe it's under 10 bucks Considering you get two screen protectors and it comes with all the accessories to put it on perfectly. What a steal. It is a PERFECT fit for my Samsung Galaxy Note 20. The first picture shows how the screen protector fits right up the edge. The second pic shows that it doesn't interfere with my phone case.

I went through all 4 of these screen protectors just trying to get rid of the adhesive line. The first 2 tries I had 2 clearly visible "adhesive lines" on the screen, horizontally one at the top, one towards the bottom. The final 2 tries I reduced it to 1 line, however in all 4 tries that top line was THE WORST. It was about 1/4" thick, straight across the screen left to right, with 2 parts to it... the "middle" of it that looks like a giant crack across the screen, then about 1/16" on either side of that where the residue folder and/or was not applied completely. Doesn't matter if you push down hard or light, or how far back you lift the application guide... it's there which makes this a visible nightmare. In addition to that, with the camera on the Note 20 Ultra specifically, the little foam pieces they include are not big enough... the phone slides right over the top so they are worthless. You have to double them up just for the phone to stay stationary. The only reason I am giving the "Ease of Install" 2 stars instead of 1 star like the overall review, is the protective cover and alignment tool that goes in your charging port is a great idea and does a good job of keeping the protector aligned with your phone properly. Other than that... the rest of the installation is a total nightmare unless you like the looks of your phone screen being cracked.

Easy apply, durable.