Question 1

how much coverage can you get from one tube of sealant

Accepted Answer

The depth and width of the crack your filling will dictate the length or amount of coverage. 
For example, if a crack is just about a 1'2" deep and a 1/2" wide it's possible to fill as crack between 5' and 6' long if you know how to apply this material. I learned the hard way and I wasted a lot of the contents of a few tubes until I found the correct method to apply it. It's simple, since  your hand that is pulling the trigger portion of your gun gets tired and needs a few seconds to rest I used to let the material still in the tube leak out of the tip onto my driveway as it was still under pressure, so when you need to rest for a few seconds be sure to hold the gun with the tube still in it over the crack your filling so whatever leaks out of the tube will continue to fill the crack until your hand is rested enough to resume the actual filling of the crack. Keep in mind that this material expands upward so experiment to what depth you should fill a crack to see how much it expands upward which is another way to stretch the distance you can get out of one tube. One other method to save material so as to stretch it is to fill a crack with some fine sand (beach sand will do) to almost half of the total depth of the crack prior to filling it with this material. Also, don't be discouraged if the filler doesn't harden as it's not supposed to harden so it remains a little pliable, so it gives a little so as not to create another crack eventually. Keep in mind to wear some cheap throw away rubber gloves as it's guaranteed to get on your hands regardless of how careful you are when applying; however, if some of it does get on your hands it does wash off with warm water and lots of soap. Good luck, take your time and remember not to let it drip out of the front of the tip. KHM

Question 2

What is the low end temperature range for application?

Accepted Answer

Hi Jeffrey. We recommend an ambient and substrate temperature between 40–100 °F for the application of Sikaflex-410 Asphalt Sealant. Thank you for choosing Sika!

Question 3

What is the total volume of the tube?

Accepted Answer

Hi Glenn. Sikaflex-410 Asphalt Sealant comes in 9 fluid ounce (266 ml), moisture resistant, caulk gun cartridges. Thank you for choosing Sika!

Question 4

Does it show after covered with driveway filler sealer?

Accepted Answer

Have not covered it with driveway filler sealer.  It does show prominently on my driveway.  However it does dry to a hard substance that appears  to be Indestructible! I wish my whole driveway was made of this material.

ASIN	B086L38Z2L
Best Sellers Rank	#4,352 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #15 in Hardware Sealers
Brand Name	SIKA
Color	Black
Customer Reviews	4.5 4.5 out of 5 stars (1,079)
Full Cure Time	24 Hours
Included Components	1 Cartridge
Initial Hardening Time	60 Minutes
Item Form	Liquid
Item Type Name	Asphalt Sealant
Item Weight	9 Ounces
Liquid Volume	9 Fluid Ounces
Manufacturer	Sika USA
Material Type	Polyurethane
Maximum Gap Fill	1.5 Inches
Model	621653
Number of Items	1
Part Number	621653
Surface Recommendation	Asphalt
UPC	033886132695
Unit Count	9.0 Fluid Ounces
Warranty Description	SIKA warrants this product for one year from date of installation to be free from manufacturing defects and to meet the technical properties on the current Product Data Sheet if used as directed within the product’s shelf life.
Water Resistance Level	Waterproof

Sikaflex-410 Asphalt Sealant, Black, Self-Leveling Hybrid Sealant for Filling Cracks in Asphalt Driveways, Roadways, and Pavements - 9 fl. oz. Cartridge, Fills Cracks up to 1.5 in. Wide

Details

Details

Description

Specifications

Common Questions