4452

I’ve had my machine for a while now and I’ve made quite a few projects with it. I am absolutely thrilled with how well it works. There are more than enough stitch functions for most sewists. This machine is mechanical instead of digital which means I can clean and maintain it on my own and not have to worry with electronics and circuits breaking down. Don’t be intimidated by the word “mechanical” if you’re new to sewing. Everything is as easy as turning a dial. Like most machines it works best if you remove the throat plate and clean and oil it after every project. It’s insanely simple and takes me about 5 minutes to do. You can find tutorials online, and other than the oil (which is cheap and lasts forever) this machine comes with all of the tools you need although I recommend buying a tiny screwdriver set if you sew a lot. I’ve even set the timing on this thing after a mishap with an aftermarket ruffled foot and was amazed at how simple it was to do. I also like that if you learn to listen to this machine it’s going to tell you waaay ahead of time if there’s a problem so you can take care of it before it jams. The only problem I’ve had with this machine is that if I use the upright spool pin the thread sometimes jumps and wraps around the pin and jams. I finally quit using that pin and either use a freestanding one I bought cheap or the horizontal pin that comes with the machine. I’ve been able to sew corsets with multiple layers of fabric and cording with no issues at all. It took me a few tries to get the buttonhole feature right (really make sure you have the lever all the way down, again, watch a few videos online) but buttonholes are now easy as pie. If you’re a more advanced sewer who loves all of the bells and whistles like push button thread cutters and super fancy features, this probably won’t be your fave unless you’re looking for a workhorse for more sturdy fabrics. But I assume that anyone that advanced is probably looking at machines that are 5 times more expensive and will require a pro to service once a year.

For a lower priced machine, this appears to be a great sewing machine. I purchased the Singer Heavy Duty 4452, which came in a holiday bundle that included the extension table and 2 extra presser feet. My two other machines have had some pretty bad tension problems. So, in spite of my brother (a professional opera costume maker and men's suit tailor) warning me to not get a lower end Singer and to repair my expensive Rickar, I purchased this one anyway. So far, I have sewn repairs on a heavy broadcloth pickleball net bag, sewn some knit fabric chair covers, taken in a couple knit tops, repaired a woven cotton/poly blend bag, and have done various other little repair projects - all with this new Singer. It has done well. Of course, I make sure to use the same thread (or at least same weight and type of thread) in both the upper and lower, made sure they are sewing in equal tensions before commencing my projects, am using newer threads as old thread 'decays', and I feed the fabric through evenly and smoothly (no bunching, or improper pinning or matching of sides or trying to twist it funny as it goes). Things I like about this machine: top loading bobbin, ease of winding bobbins, good solid needle sewing, when I lift my foot off the pressure foot the needle stays essentially where I ended it (great for sinking the needle, to turn corners, or hold the fabric in place for any manipulations), and I've gotten used to the upper knob for doing a reverse stitch (it depresses downward, so the machines stays in place - I've used a crazy machine before where the knob was to be pressed inward so I was always pushing the machine back or tipping it over), and once the knobs are all set, the sewing has been easy and straight forward. Things I don't like about this machine: there are many knobs and dials on it, without clear explanations, so I often have to refer to the manual I printed out to know which knobs and dials to turn to where to get it to sew straight, zig zag, for making button holes, etc., and there is wasted space in the sew up (it would have been very easy to have designed in storage compartments in the basic desk around the presser foot and in the extension table-but there is nothing). All in all, for the price, I give this machine nine out of 10 stars.

Are you looking for a sewing machine? I'm in love with my Singer Heavy Duty—it's very easy to use.

This is not the first singer heavy duty I have owned. I have one that broke because of my own stupidity. And of course I broke it while I was in the middle of a project. So that one's in the shop and being the impatient person I am, I decided to buy a second one to finish my project. It's sews like a dream! The speed is spectacular, it's easy to thread, and it has enough stitches to keep me happy. I find I don't need a lot of stitches because I'm not into machine embroidery or anything like that. I basically sew garments, bags, etc and straight, zigzag, a couple of stretch stitches, and a few decorative stitches are all I need. This is a great machine if somebody wants to start out because it's inexpensive and it works very well.

They say it has 50 percent more power.....than what....???? I wish they provided a kit that I could use to soup up this unit to get a bit more power, another 25% or more and I would pay anohter hundred. I like all the features otherwise and hope this unit will last like the kenmores and singers of the past. I also hope the unit is all metal gears, because the plastic one always broke within a couple of years. I ususually like the singer stitching and mostly the adjustments in the old machines. So far the thread looping is okay, works some of the time and top loading is more convenient. They should sell this machine with an optional carrying case and have aftermarket accessories to make the unit stronger and more convenient. I soup up my cars, so what not a sewing machine?

Arrived on time and undamaged. Easy to operate and would be excellent for a beginner. I love a top loading bobbin. Absolutely would recommend this sewing machine to anyone.

I have been sewing my entire life. Never have I used such a poorly designed machine. Whoever designed this thing must not have known how to sew. A few of the bad features: 1. The walking foot doesn't have a place to attach a quilting guide. Since the walking foot is primarily where this type of guide is used, I don't know what they were thinking. I've had to use a walking foot from another brand of sewing machine in order to use a guide. I also used the guide from the other machine, since the one Singer provides is awkward and stupid. And it should be TWO guides; which one you use depends on what direction you are quilting in. 2. You have to unscrew the needle plate to get underneath it and clean out lint. And even then, it's practically impossible to get at all of it. In other machines, I can just pop off that plate and clean as often as I need to. And it's a lot easier to clean once the plate is removed. 3. It's EXTREMELY DIFFICULT to put on and take off the presser foot "ankle" or the walking foot. The machine won't let me get my hand in there to direct the screw to where it needs to go. I have very small hands, but even my small hands can't fit in there to work the screw. I have been sitting here cussing out this machine for this for the last hour, and I STILL haven't been able to get the walking foot back on (after the hassle of unscrewing the needle plate to clean). If I could just barely get the screw in its spot and get it started, then I could get in there with my screwdriver and finish the job. But the walking foot slides up and down the shaft and won't stay still long enough to get the screw into the hole - even if I COULD fit my little hand in there to do it. 4. This is not a true heavy duty machine. The presser foot cannot be raised more than the standard amount, so I can't fit several layers of fabric under it. I make purses and bags, and deal with LOTS of layers. This machine did not give me ANY advantage in dealing with all those layers. 5. It can sew very fast, but it's very noisy. And the stitching motion is jerky, not smooth. This machine is not fun to use at all. 6. If you want it for zig-zag stitches, forget about it and find another machine. I tried using a very simple zig-zag stitch on some cotton/lycra knit fabric, and it just made a tangled mess. The only stitch this machine can handle is a straight stitch. 7. It doesn't have the "needle down" feature. If I want to pivot - as I need to at the end of every row of straight quilting - I have to manually make sure the needle is down and then pivot. Total waste of time and motion. I wish I'd never bought this machine. Thank goodness I didn't pay much more than a couple of hundred bucks for it; that's still wasted money. As soon as I am able I will buy a much nicer machine that is TRULY HEAVY DUTY to replace it. I know I am comparing a low-cost Singer with other more expensive machines, but many of these poor design features would be very simple and low cost to fix. It's infuriating.

The Singer Heavy Duty 4452 Sewing Machine with Accessories, 32 Built-In Stitches, and 60% Stronger Motor is like our family AD 1950 mechanical sewing machine product with modern mechanical design. For general purpose everyday sewing the stronger motor is compatible for most fabrics. The simple mechanics in this product is what makes it reliable as compared to product with electronic circuit boards. If something goes wrong in the many years of use in this product, I intend to service this sewing machine product myself and access to the inside of a product is important to me. GrandMaMa has been sewing in our family since the early AD 1910s. Though there are many great sewing machine products available today few are as reliable as the Singer Heavy Duty 4452 Sewing Machine. I can only want a 100% USA made sewing machine product but that is not available as yet. Remember that 100% USA made washing machine from the AD 1920s that can clean 300 pounds of dry clothing? Remember the AD 1970 Buick Skylark and AD 1969 Oldsmobile Cutlass-S vehicles? They are all extremely durable when the user takes care of these mechanical products. Now with the computer logic circuit boards inside many late designed sewing machines giving more features controlling the motor makes a complex and less reliable product. Without lead in the circuit board components (because of political mandated regulations in the electronic industries there is no more lead in electronic circuits or their component parts,) many overheated circuit boards under long time usage. The circuit tracings using SMT (surface Mount Technology used in manufacturing since the early 1980s,) overheated and the electronic components then come off the circuit board tracing. The lead when used in the past will stay attached to the circuit board tracings in spite of the hot operational temperatures. Keep the product simple, reliable, and access for the user when the product requires service. This Singer sewing machine product reflects upon the time period when products were designed and made to last a long while.

Tutto secondo descrizione, consiglio l'acquisto ottima macchina.

Esta máquina es excelente, tiene buena velocidad, no hace ruido, es apta para las agujas industriales, cose muy muy bien los jeans hasta el cuero , esa función que tiene es excelente , y claro es más o menos pesada pero por qué es máquina de las buenas

Good machine and quick to deliver, however, when I purchased the machine it did NOT state it was coming from USA, consequently arrived with USA Plug and NOT Australian - cost me $50 AUS for a power reducer from 240V to 110V.

Bought this for the wife for Christmas. She absolutely loves the machine and all the stitches she says very easy to use

Wat een prachtige en mooie machine